Example i import data of say names steve jones, paul jones etc but in some cases it imports (5) steve jones or (db) steve jones and then the lookup wont produce the right data and i get #N/A coming up
so it has
steve jones 10
tom jones 15
(4) steve jones #N/A
i would like to be able to do a vlookup on another tab of that information and just import everything except ( ) and the contents
I've got a problem involving several Dim'd Variables needing to be added up, they're all Dim'd as Variants though as they can be either strings or numbers at any time.
I need a formula (VBA) to add them up (to add their actual numeric values - not just a "1" if they contain a number) and ignore them all together if they contain string values.
I need to do a vlookup that takes a string from one cell and then tries to find that string (embedded in a larger string) in the table array
Essentially I imagine this involves the FIND function at some point.
Attached is an incredibly simplified example of what I'm looking for.
I have an excel worksheet with about 10K rows of data in column A.
I have also another list of data, about 200 rows of data, in column G.
I need to color each cell in column A that contains, anywere in the string, any of the data strings in column G.
Example:
in column A
row 1: info@duende.com
row 2: rasko@silvester.com
row 3: supportonline@fabius.com
row 4: myhelp@friday.com
in column G:
row 1: help
row 2: info
row 3: support
I need rows 1, 3 and 4 in column A to be colored.
I have a column I want to average however it contains zero's and #DIV/0 entries in it.
Those entries are from linked sheets that have not been populated and are supposed to be there. I want to average the column that contains these values but want the values excluded from the calculation until they are populated with real numbers.
I have rows of data with numbers and these #DIV/0! errors. I need a sum formula so when going through the entire row it will ignore these errors, at the moment as they are included in my sum formula the total is also giving me #DIV/0!
View 4 Replies View RelatedI have managed to get it almost done with lots of help from here the last issue I have is this:
The module I want transferred is working the assigning of the macro within that module to the button is working, however, when it gets to the FillSalesSheet section it opens the said workbook but then jumps to the module and the FillSalesSheet in that.
Module 1 which I would like ignored on the newly formed workbooks looks like this: ...
I have stacked formulas that look for values via vlookup and index match functions.
Sometimes the worksheet will have ( 100 ) separated into 3 columns (open parenthesis, number, closed parenthesis) and the formula will pull the first column containing the parenthesis. How can I write the formula to ignore the "(" and get to the "100"?
The formula uses ISERROR to move forward, could I incorporate ISNUMBER also or is there a better way to do this?
I'd like to sum the following, ignoring F.O.Cs
7,500.00
2,250.00
F.O.C
=?
and also auto compute rows with F.O.Cs (each in different cells)
QTY---Unit Price---Total
5---------6---------30
2-------F.O.C-----F.O.C
I am using a simple SUM formula like this, =SUM(D10:E10). I would like for the SUM cell to be left blank until a value is entered into the cells D10. Currently it calculates the SUM as 0.
View 13 Replies View RelatedIf I have a formula which adds the value of each day of the week and divides by 7 to get an average per day, how do i fix it to get an average if their is a holiday so their would only be 6 days without changing the formula as the holidays could change from week to week by province.
=(a+b+c+d+e+f+g)/7 what happens if "e" is a holiday and I need to divide by 6, or in the case of xmas if "d and e" are holidays and I need to divide by 5?
I'm trying to average a column range range =AVERAGE(A5:A29) that has blank cells not yet populated and also cells with formulas that contain the #DIV/0! error.
Obviously the cell with my formula produces the #DIV/0! error when it tries to average this range. Can someone point me in the right direction so the formula =AVERAGE(A5:A29) will work?
I need a formula that will find the mode from a range of numbers but ignore the 0's. I have worked out the below array formula which seems to work.
{=IF(MODE(IF(N18:P25>0,N18:P25))=1,"Low",IF(MODE(IF(N18:P25>0,N18:P25))=2,"Secure",IF(MODE(IF(N18:P2 5>0,N18:P25))=3,"High")))}
The only thing is, if only one cell contains a number other than 0 (eg. 1,2 or 3) then it returns #N/A. Ideally i'd like it to show the appropriate response for the number that is in the number range. For example - if one cell shows the number 2 and the rest are 0's, i'd like it to show Secure(the response for 2) rather than #N/A.
I have a line graph that charts certain data per day in a month.
During the weekend there is no data. The graph however considers the number as zero, and I want it to just "skip" that day and plot the line directly from the friday date to the monday, instead of the line touching zero on saturday's and sundays.
Is it possible to do this? Or am I forced to adapt my table to only include days of the week?
I am a excel novice and can't seem to find a solution to this problem, there's most likely a simple solution. I want to calculate the total of N - M in L only if N is > £0, If I have not got a selling price in N how can I make cell L show blank?
I have attached a sample of the sheet.
I have the following formula but I want to ensure that the sum ignores any text so I don't get #VALUE! returned. I've tried including ISERROR but doesn't seem to be working correctly. The formula is: =IF(H19+H20+H21+H22+H23+H24+H25+H26+H27+H28>0,SUM(H19:H28),"")
View 3 Replies View RelatedI've recorded some macros for completing formatting tasks and I'd like to know if there is a way of asking the macro to ignore sheets if there is no data.
The files are reports we export from our accounting system and they need to be tidied up, named and sorted. It's the sorting and subtotalling that is causing an issue because not every department has transactions every month. I'd like the macro to skip over sheets with no transactions and continue on.
I have a combo box with a list of vendors. The problem is that a vendor can appear more than once. The list of vendors is dynamic so new vendors can be added and still appear in the combo box but how can I get the combox box list to only recognize the vendor name once so I don't have multiple duplicate vendors showing in the list?
View 9 Replies View RelatedI have percentages in Col C. I would like to count the number, excluding zero percentages
View 3 Replies View RelatedI need to create a sum ignoring the two lowest entries in a series of cells. I have a way to ignore the lowest entry, but not the two lowest.
=IF((COUNT(D8,F8,H8,J8,L8,N8,P8,R8)
In my spreadsheet, I have a formula that extract to other column only non duplicates, then I want this information in other column sort by the lowest number but without the zero.
Column A, all numbers extracted
Column B, all non duplicates, where normally we have one zero.
I want the result from Column B in other sheet like that:
SheetA, Column B: 637,635,663,0,618.
SheetB, Column A, RowX: 618;635;637;663.
I want to count back the last 6 cells in column S which has data (ignoring any blank cells) and add them up.
My data is ranging betwen S62:S143 (with S144 being the cell that I want to show the total for the last 6 cells with data). I have column headings and various other bits of data from S1:S61 that I want to exclude completely but need to keep for historical purposes.
Here is an example of some of the data in column S:
56
BLANK CELL
BLANK CELL
BLANK CELL
45
34
BLANK CELL
BLANK CELL
37
BLANK CELL
BLANK CELL
42
BLANK CELL
46
49
BLANK CELL
BLANK CELL
36
35
This is my formula so far:
=SUM(OFFSET(S62,0,0,COUNTA(S62:S143)))
I have tried adding a negative and positive number on the end of the COUNTA formula but all it does is count all the cells within that given heigh range, not a specific number of cells with data.
I don't specifically need to use SUM. As long as I get a total.
how to ignore errors when using DAVERAGE?
View 11 Replies View RelatedI have two issues with an excel graph to automate it.
My first problem is that I have to manually select the source data when the data changes inside my spreadsheet. I have 35 slots that represent a 5 week period. Because the first day of the month does not always start on the first day of the week, I have to allow the extra 5 slots in my template. I have the cells set to show blank when there is no data entered in certain cells. Therefore, only days that the machine is up gets put into the 35 cell table. When I do this, the blank cells show up as 0 on the graph and it skews the line. I need some solution that will allow me to tell the graph to ignore zeros.
The second issue is the title in my graph. I have a set title, but need it to pull "Month Year" and "c81" from the worksheet it is on. I cannot seem to get it to populate automatically in the label. I would like it to look like the following:
614 Machine Uptime Percentage
%Month Year%
MTD PCT (%c81%)
where the %name% is the automatically populated item. I don't necessarily have a problem with hiding a cell and linking the label to that cell inside the graph, but I need it to change those two items automatically.
Im certain that a resolution to both of these items exist and I am certain it is an easy thing that I will be kicking myself in the rear over once I find out the resolution, but I need to get this done and im tired of wasting time. I hope this makes sense. If you need me to post an excel file as an example, I will be more than happy to.
I have a column that orders fine a-z except for the fact that it doesn't group words together with hyphens e.g.:
1.my-flies
2.myflies
3.my-fly
4.myfly
when I want it to be
1.my-flies
2.my-fly
3.myfly
4.myflies
I'm trying to SUM a column, but it has a negative number in it. I want to sum the column but ignore the negative number.
I.E.
5
46
12
-15
3
so the total would be 66. How is this possible or would i have to use another formula instead of SUM.
I'm trying to figure out if an employee is in probation period or not. I have this formula in S3 =IF(TODAY()-R3>90, "No", "Yes"). I need to leave S3 empty if no value in R3 (R3 contain hiring date)
View 2 Replies View RelatedI have a range of cells (B6:M6) and I want to count how many have data. My problem is that all of the cells reference cells on another worksheet. Every cell starts out like =Bethlehem!B6. I want to ignore cells that have a reference in it when I count. I know how to do it if you want to ignore these cells as follows: =countif(b6:m6,"<> 0"). Those cell references return a 0 if they have no data in them. However, a user might actually enter a 0 in the referenced cell and I need to count that one. The above formula would exclude it.
View 4 Replies View RelatedSo this forum has helped me in the past develop a standard deviation that removes max and min from the data set.
=STDEV(LARGE(E5:AB5,ROW(INDIRECT("2:"&COUNT(E5:AB5)-1))))
Would if be possible to adjust this formula to ignore N/A's?
I have a schedule of holiday dates through year 2010 off to the side in cells N8-S18 that a workable formula could refer to.
........C...................D..................... ......E.........
1......1............10/25/2005...........10/26/2005
2......2............10/27/2005...........10/29/2005
3......0............10/29/2005...........10/29/2005
4......3............10/29/2005...........11/01/2005
Column C is the duration of the project in days. Column D is the project start date. Column E is the project end date.
As example, in D4 I'm using the formula =IF(C3=0,E3+0,E3+1). I need to include something to make it ignore weekends & holidays.
I don't have much experience in multiple conditions - I tried some things & made a decent mess of it.