I'm trying to average a column range range =AVERAGE(A5:A29) that has blank cells not yet populated and also cells with formulas that contain the #DIV/0! error.
Obviously the cell with my formula produces the #DIV/0! error when it tries to average this range. Can someone point me in the right direction so the formula =AVERAGE(A5:A29) will work?
Trying to determine the best way to do this. I understand that the standard AVERAGE function will ignore blanks if given a range; the function I'm using does a search for a particular value to determine if a value is to be included in the averaging: ...
View 9 Replies View RelatedI used each of the following codes for dynamic name ranges.
View 4 Replies View RelatedUsing formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.
The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?
I would like to rotate a Line Chart 90 degrees. I tried using an XY scatter chart but my Y-axis would be time values which are somewhat random but increasing. I would like to keep the spacing between plot points consistent (Y-axis spacing). I could simply use a number list for my Y-values to get consistent spacing but then I lose the time information. I don’t necessarily need the time value on the Y-axis if I could get the information to display when mousing over the plot point. Any ideas on how I could accomplish this?
View 6 Replies View RelatedError Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
I have a column I want to average however it contains zero's and #DIV/0 entries in it.
Those entries are from linked sheets that have not been populated and are supposed to be there. I want to average the column that contains these values but want the values excluded from the calculation until they are populated with real numbers.
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have rows of data with numbers and these #DIV/0! errors. I need a sum formula so when going through the entire row it will ignore these errors, at the moment as they are included in my sum formula the total is also giving me #DIV/0!
View 4 Replies View RelatedI have managed to get it almost done with lots of help from here the last issue I have is this:
The module I want transferred is working the assigning of the macro within that module to the button is working, however, when it gets to the FillSalesSheet section it opens the said workbook but then jumps to the module and the FillSalesSheet in that.
Module 1 which I would like ignored on the newly formed workbooks looks like this: ...
I keep getting an error message when running the following code.
I am not sure why, but I keep getting a "Run-Time error '9': Subscript out of range" error message.
What I'm trying to do is change the text color of specific keywords in a spreadsheet. For example, I'd like to highlight the text of 'how to' in the following sentence "I want to know how to change text color", so that it looks like this "I want to know how to change text color".
I came across the following, and it works for only two terms (example, "how to" , "how do I"), but I have a string of about 15 terms I'd like to use, but anything I change over two, I get the subscript out of range error.
[Code] .....
what I'm trying to do is automatically format Excel's track changes to look like Microsoft Word's track changes feature i.e. put in a strike-through when people make changes on a shared spreadsheet.
I found the following script from here: [URL] .....
Dim xLen As Integer
Dim x, y, z, addr As String
Worksheets("History").Activate
Range("G2").Select[code]....
Unfortunately, that produces the "Subscript out of range (Error 9)."
Clicking debug will highlight 'Worksheets("History").Activate', but I'm assuming that will just be one problem among a few others.
I've also tried replacing the 'x' in 'Worksheets(x).Activate' with the name of the worksheet (with extension xlsm), but no joy.
I am having trouble in a dowhile loop that i have created. Its purpose is to copy an unknown amount of data points into an array while it counts how many data points it collects and how many of them are above a reference pressure. I have defined data_A(),data_points,above_reference, and reference_pressure all as integers. The error occurs in the second line of code.
View 14 Replies View RelatedI have a workbook called "Project" and in it there is a macro that pulls data out of another workbook called "Operations Report."
The macro works fine on my laptop. When I run the macro, I make sure that both workbooks are open, (and they are also saved in the same directory - not sure that matters).
I sent the two workbooks to a colleague and when she opens them both and runs the macro, she gets a "run error 9 subscript out of range" error. She too has saved them to the same directory.
why she might be getting the error when I do not? Here is the line where hers trips up:
With Workbooks("Operations Report").Worksheets("Sheet2")
I assume that the macro is not finding the "Operations Report" workbook.
Are there some checks we could do or test lines of code I could send to her to diagnose the problem?
Error 9 - Subscript Out Of Range....All sheets are in workbook and spelt correctly....could it be in the Array or Loop part of the code.
It also in the userform have a combobox for Day,Afternoon and Night but it transfers all across.Need the code to just transfer what is selected from the combobox (could be a listbox as well).If day selected then only Day for the selected date,,,same for afternoon and night unless All selected in which all are transferred (DAy,Afternnon & Night)
This part of he code gives error
Code:
arrOP_PS(PSCounter, 1) = CDate(Data(CurrentRow, 1)) 'date
Code:
Dim Data
Dim arrOP_PS(1 To 6, 1 To 5), PSCounter As Long
Dim arrOP_MSI(1 To 6, 1 To 5), MSICounter As Long
Dim arrOP_MSE(1 To 6, 1 To 5), MSECounter As Long
Private Sub CommandButton1_Click()
[Code] ........
Sub Split_By_Store()
x = Cells(Rows.Count, 1).End(xlUp).Row
MsgBox x
a = "F1:F" & x
Range(a).AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range("J1"), Unique:=True
y = Cells(Rows.Count, 10).End(xlUp).Row
For b = 2 To y
Worksheets.Add.Name = Worksheets("data").Cells(b, 10)
Next b
For c = 2 To x ' copy the data now
d = Worksheets("data").Cells(c, 6)
z = Worksheets(d).Cells(Rows.Count, 1).End(xlUp).Row
Worksheets("data").Range("A" & c & ":I" & c).Copy
Worksheets(d).Cells(z + 1, 1).PasteSpecial
Next c
End Sub
This code breaks on the line z =, I get a Subscript out of range:9 error. Basically this starts with a single sheet called "data". Column F has store number and column J is created as a helper column and each unique store number is transfered there... Then sheets are created for each unique store number from the helper column. Then it's supposed to transfer the area A:I from the "data" sheet for each store that is unique from column F and transfer that to the corresponding Store number for the sheet that was created for it in the earlier step.
i'm currently having lots of trouble with VBA's syntex 'cos
statement:
DefaultProb(i) = Application.WorksheetFunction.HLookup _
(Ratings(i), Worksheets("DefaultTable"). _
Range(Cells(2, 2), Cells(RowValue, 20)), RowValue, False)
Specifically, is
Range(Cells(2, 2), Cells(RowValue, 20))
correct? I declared RowValue previously and assigned it to another variable.
Just in case i'm not providing enough information, my whole procedure is:
Sub Default_Probability()
'Generates default probabilities
Dim i As Integer, j As Integer
Dim Tenor(1 To 5) As Integer
Dim Ratings(1 To 5) As String
Dim Row(1 To 5) As Integer
Dim RowValue As Integer
Dim DefaultProb(1 To 5) As Double
I have in the attached workbook, a form which I run, the macro StartForm. This brings up the form, where in A, I select the sheet label Oval_An, and in B, I select the sheet Oval_DMA. The other drop down boxes are not in use yet. Once A and B are selected, the user hits the big subtract button, and normally gives the the new sheet, Final Results.
Yet, when I change the name of the forms, or allow the kTest compare variance box into the macro to be user definable via the form, the whole thing just stops working.
The error is found in the kTest macro, line 12 as a type mis match.
Redim q(1 To UBound(a, 1), 1 To 1)
I have had a whole lot of help from people with this, and I am new to VBA.
I have stacked formulas that look for values via vlookup and index match functions.
Sometimes the worksheet will have ( 100 ) separated into 3 columns (open parenthesis, number, closed parenthesis) and the formula will pull the first column containing the parenthesis. How can I write the formula to ignore the "(" and get to the "100"?
The formula uses ISERROR to move forward, could I incorporate ISNUMBER also or is there a better way to do this?
I'd like to sum the following, ignoring F.O.Cs
7,500.00
2,250.00
F.O.C
=?
and also auto compute rows with F.O.Cs (each in different cells)
QTY---Unit Price---Total
5---------6---------30
2-------F.O.C-----F.O.C
I am using a simple SUM formula like this, =SUM(D10:E10). I would like for the SUM cell to be left blank until a value is entered into the cells D10. Currently it calculates the SUM as 0.
View 13 Replies View RelatedIf I have a formula which adds the value of each day of the week and divides by 7 to get an average per day, how do i fix it to get an average if their is a holiday so their would only be 6 days without changing the formula as the holidays could change from week to week by province.
=(a+b+c+d+e+f+g)/7 what happens if "e" is a holiday and I need to divide by 6, or in the case of xmas if "d and e" are holidays and I need to divide by 5?
I need a formula that will find the mode from a range of numbers but ignore the 0's. I have worked out the below array formula which seems to work.
{=IF(MODE(IF(N18:P25>0,N18:P25))=1,"Low",IF(MODE(IF(N18:P25>0,N18:P25))=2,"Secure",IF(MODE(IF(N18:P2 5>0,N18:P25))=3,"High")))}
The only thing is, if only one cell contains a number other than 0 (eg. 1,2 or 3) then it returns #N/A. Ideally i'd like it to show the appropriate response for the number that is in the number range. For example - if one cell shows the number 2 and the rest are 0's, i'd like it to show Secure(the response for 2) rather than #N/A.
I have a line graph that charts certain data per day in a month.
During the weekend there is no data. The graph however considers the number as zero, and I want it to just "skip" that day and plot the line directly from the friday date to the monday, instead of the line touching zero on saturday's and sundays.
Is it possible to do this? Or am I forced to adapt my table to only include days of the week?
I am a excel novice and can't seem to find a solution to this problem, there's most likely a simple solution. I want to calculate the total of N - M in L only if N is > £0, If I have not got a selling price in N how can I make cell L show blank?
I have attached a sample of the sheet.
I have the following formula but I want to ensure that the sum ignores any text so I don't get #VALUE! returned. I've tried including ISERROR but doesn't seem to be working correctly. The formula is: =IF(H19+H20+H21+H22+H23+H24+H25+H26+H27+H28>0,SUM(H19:H28),"")
View 3 Replies View RelatedExample i import data of say names steve jones, paul jones etc but in some cases it imports (5) steve jones or (db) steve jones and then the lookup wont produce the right data and i get #N/A coming up
so it has
steve jones 10
tom jones 15
(4) steve jones #N/A
i would like to be able to do a vlookup on another tab of that information and just import everything except ( ) and the contents
I've recorded some macros for completing formatting tasks and I'd like to know if there is a way of asking the macro to ignore sheets if there is no data.
The files are reports we export from our accounting system and they need to be tidied up, named and sorted. It's the sorting and subtotalling that is causing an issue because not every department has transactions every month. I'd like the macro to skip over sheets with no transactions and continue on.