I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I'm using a userform to create a new sheet. The form already creates the sheet and names it what was typed into the userform. Now I want it to place that variable in a cell along with a string. the following code will place the variable from the form (tbname) into cell b5.
I am trying to use a variable for the name in the Sheets command so that I can put in the names of the CSV file that I have captured in a variable. Here is the macro that I recorded using Excel 2007:
I believe I should use the INSTR function, but I simply dont understand its use very well. I have a string in a cell, "MEAS/SPHERE,F(QUA_1),5", the characters I need start at the "(" and end at the closing ")", ref: (QUA_1). The start and end will always be the same, the length of characters and the spelling of characters be anything. Thus, QUA_1 can be CAL_1, CAL_2, SOMEOTHERTEXT_1 or 187bgo_199, etc, always enclosed in "( )". I wish to place the characters and the closing "( )" into a variable as a string.
This one has two sets of quotes, with the information from the noted post I can retrieve the string "S5a09b-90", now that I have a double set of brackets "( )" how do I get the value for the second set of brackets, "CAL_15"?
In the quoted string, CALIB/SENS,S, is constant. The first set of brackets are constant (string length is not), the second set of brackets are constant (string length is not).
if it is possible, to use a string variable in a Formula via VBA.
For example: ActiveCell.Formula = "=SUM(Sheet3!strVariable)"
Of course the code is not working that way. The Variable has the following structer: CellAdress;CellAdress;CellAdress... so it would perfectly fit into the formula-syntax.
Is there any possible way to do that? The reason behind it is, that I have to deal with a flexible range and I want to process this range with a formula. Actually the range is flexible, because of different filters and I only wanna count all numbers in the unhidden rows.
My varibale would then contain all celladresses, for the visible cells.
So in a nutshell: is it possible to somehow use a varible in a formula?
I have several words in sheet2.one word per line. every line in sheet1 should be checked and deleted if the line (colum 3 and 4) contains any of the words in sheet2. i decided to go with two for-loops, my Problem is a error in line 7 and 9 (indicated by arrows). it seems to me that ...Cells(...).Value is not allowed for strings. i already tried .Text, checked several VBA Forums but could not find a solution.
I'm taking some university classes and one of them is called Applications Programming and we have been using excel VBA. I have a project that I'm working on, and it's very basic. Basically we need to create a userform that has 3 option buttons, 4 check boxes, a couple labels and a couple text boxes. It's suppose to be a ice cream selection terminal. Option boxes for basic flavors of ice cream, check boxes for toppings, one text box for user input of number of scoops of ice cream and the last text box to output a reciept/overview of purchase.
So here's the question... I was wondering if there's a way to change the font of a single string variable, or change the font of a word within a string. My output to the saleBox(My receipt overview) is this:
saleBox.Text = ("Thanks you for your Purchase") & vbCrLf & vbCrLf & _ "You ordered " & numOfScoop & " scoops of " & flavorChoice & "ice cream" & vbCrLf & _ "Topped with: " & toppings & vbCrLf & vbCrLf & total
(not sure how the code is gonna look in the message but I'm sure you get the idea)
i want to be able to change the font for the flavorChoice or toppings variables. They are both strings.
Anyways, I know I can get away with basically what I have there and get full marks, but I like going above what the basics are. If it's kinda complicated.
I'm gonna attach a screenshot, more info is better than not enough right... nevermind its askin for a url!
*** I just now got the idea of putting another textbox over the area that would output the text I want to change and hide the border or something and then change the font of that text box through the properties ***
I'm trying to check to see if a file exists using VBA but the routines I see use a string that has the path and then the file name. I have a fixed path C:VBtesting and the a variable file name. I'm using a file name that consists of a username & date such as cwilliams201212. I'm having problems getting the variable file name into the string.
I'm getting the generic 1004 error on the Range.FormulaR1C1 line, but I can't seem to see the problem.
Code: Sub UpdateFormulas() Dim stockFund As String For i = 2 To finalRow
[Code]....
The mouse-over on the stockFund variable in that last line shows the correct cell address as the value and I checked the If statement to ensure it actually finds the number. I would guess that it would be a syntax error with that line, but it looks correct to me.
I have a comment that I'm putting into a variable for the purpose of obtaining the persons name.
Cell C3 (in this example) just contains their employee number, but it's comment contains...
Tech ID: 123456 Name: John Doe
The Tech ID is variable from 3 chars to 6 chars and obviously the name is size is also variable. The end result will be a variable with just the persons first and last name extracted from the comment.
Code: Dim mycmt As String Dim techname As String mycmt = Sheets("tech").Cells(3, "C").Comment.Text techname = Right(mycmt, BIG-OLE-BALL-OF-CONFUSION) MsgBox techname
My 2nd question. This is the 3rd time in recent days that I've needed a partial string and Mid, Left, Right, Len, Find just boggles my mind.
I'm trying to use a variable that hold a string in Shell string command. This shell is the command to take a snap picture over a given region and store the picture to a pre determined file name
***The code do compile***
The string variable is : StringAddress = "g: estsnapasnap1.jpg"
I'm having trouble setting the Range "UtilizationRange" using a variable, "CurrentRange" to store that range. I get the error "Run-Time error 1004: Method 'Range' of object'_Global' failed".The rest of my code works when I set the utilization range using the actual range for my purposes, but the problem is the range will change each month and I don't want to change it manually each time. There's a cell in the excel sheet this refers to (AG3) that holds the range value, which in this case is [N7:N75], and I would just like to return that value to the variable "CurrentRange" and set UtilizationRange equal to that.
The value is returned to CurrentRange, but it's the last line that's giving me the problem.
Sub RangeTest()Dim UtilizationRange As Range, Cell As RangeDim CurrentRange As String CurrentRange = Range("AG3").Value MsgBox (CurrentRange) 'This returns the value [N7:N75], which is what I want Set UtilizationRange = Range("CurrentRange")End Sub
Let us assume x and y are strings. Now let us make x equal to a small sentence (ie. full of words and spaces). I now need to somehow make y equal to x, but with the last word removed. I need to do this in VBA.
I want to remove varying amounts of periods that appear at the end of my strings. For instance, ABCEDFGH......., DEFGH.., FG.... etc. Do I have to test each char to see if it's a period, and then use that count of chars to LEFT out the string that I want? Or is there an easier, quicker way to do this?
I have a multiple select list box which I capture the selected items by using ListBox1. List
I want to use the 'selection' to build up a string that will form a document name I want to add to an email as an attachment (all being done from Excel), however I get a type mis-match error as the ListBox1.List output is a variant.
So I'm aiming to have something like MyFile = firstpartoffilename & ListBox1.List & "*.doc"
Do I need to somehow convert the variant variable or are there some other clever tricks I can use to create my document name.
I have a userform that reads in a list of names into a combobox. When you choose a name from the combobox it then shows the that persons details from a sheet containing all the names.
I have some text boxes that allows the data to be modified and returns it to the sheet which works fine. What i also want it to do it put the data from the form into a sheet for that individual. For example the name of Ford would go into the Ford worksheet.
How do i read in the value from the combobox on the worksheet and use it as a variable to use in my code. For example
Sheets(Value from the combobox).Cells(NoOfRows, 3).Value = Me.TextBoxChangePosistion.Value
I have a userform with a numerous textboxes, which I have labeled with similar text and a unique number at the end (num1_txt, num2_txt, num3_txt, etc.). I am trying to create a for loop that sequentially references the numbers of the text boxes and pulls the user-entered value in the text boxes into an Excel document.
Here is the code I have so far...
VB: i = 1 For i = 1 To 18 Dim cyltrack As String cyltrack = "Me.cyltrack" & i & "_txt.Text" If Me.cyltrack.Value = "" Then Cells((cellcount + i), 13).Value = "*" Else Cells((cellcount + i), 13).Value = cyltrack End If Next i
I am running into problems in trying to convert the string variable, cyltrack, into hard code that I could insert into Me.cyltrack.Value.
I have a long string that has a list of digits in the middle that I want to extract. The string is variable length and the number of digits I want to extract is 5-7. I also have slashes in between the numbers I want to extract. I need a UDF that allows me to extract the 5-7 digit number from the string and restrict around the slashes (i.e. if two sets of digits in the string match the condition for extraction, extract the one around the slashes.) For example my original data is like
I have a spreadsheet with column headers like, "Date" "Phone number" "Name" ect., and rows of data below. Each of these rows contains data pertaining to a prospect employee, as the purpose of the spreadsheet is to keep track of job applicants. One column is used as a 'Recruiter Sign-off' area, where the recruiter who processed the application inputs their name:
Example.png
I'm trying to automate a variation of excels sort function. However, I don't want to sort 'From A to Z.' Instead, I want to have the rows of data sorted with the 'Recruiter Sign-off' column used as the sort Key, and a selected name (of one of the recruiters) used as the sort Criteria.
I already have a userform that allows the user to select a name from a listbox. When they press confirm, the name is stored in a Public String variable, (selectedRecruiter). I'd like then like to have the rows below the column headers to be sorted based on the selected name. Example: User selects the name "Jon" from a list. The application then brings all of the applicants that 'Jon' has signed off on (those rows that contain his name) to the top rows of the range.
The workbook is shared, so I cannot use tables.
I found a code that accomplished what I want, however it also leads to a horrible system crash after a few times running it (BEX crash).
