I have a long string that has a list of digits in the middle that I want to extract. The string is variable length and the number of digits I want to extract is 5-7. I also have slashes in between the numbers I want to extract. I need a UDF that allows me to extract the 5-7 digit number from the string and restrict around the slashes (i.e. if two sets of digits in the string match the condition for extraction, extract the one around the slashes.) For example my original data is like
I've found several posts about returning variable substrings that dealt with one or two spaces, but I have not been able to find anything that is for multiple spaces. The number of characters before the substring will remain constant.
For example:
Income from transmission agreement - 83 subs @ $0.44
In this case I need to extract: 83
Income from transmission agreement - 10,312 subs @ $0.50
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I have the following issue. I have a list of strings. Each string contains certain characters that are exactly the same for all strings, some characters are different making the string longer (in some cases). What I need to do is extract some combination of characters from each string. The strings look like this:
AB & CDE & FG & I mmmm yyyy.HIJK AB & CDE & FG & II mmmm yyyy.HIJK
The part "AB & CDE & FG & " (incl. spaces) is the same for each string. The next part contains a roman count from I to VII, causing the length of each string to vary. The "mmmm" part contains the current month spelled in full e.g. December. This part differs as well, for each string. The "yyyy" part contains the year in four digits, e.g. 2007. The part after the dot is the same for each string again.
What I need to do: - is to extract the month and assign it to a new string - extract the year and assign it to a new string - extract the roman number, translate it to a normal number (II -> 2) and assign to a string (or integer).
I'm having trouble setting the Range "UtilizationRange" using a variable, "CurrentRange" to store that range. I get the error "Run-Time error 1004: Method 'Range' of object'_Global' failed".The rest of my code works when I set the utilization range using the actual range for my purposes, but the problem is the range will change each month and I don't want to change it manually each time. There's a cell in the excel sheet this refers to (AG3) that holds the range value, which in this case is [N7:N75], and I would just like to return that value to the variable "CurrentRange" and set UtilizationRange equal to that.
The value is returned to CurrentRange, but it's the last line that's giving me the problem.
Sub RangeTest()Dim UtilizationRange As Range, Cell As RangeDim CurrentRange As String CurrentRange = Range("AG3").Value MsgBox (CurrentRange) 'This returns the value [N7:N75], which is what I want Set UtilizationRange = Range("CurrentRange")End Sub
I have a spreadsheet with column headers like, "Date" "Phone number" "Name" ect., and rows of data below. Each of these rows contains data pertaining to a prospect employee, as the purpose of the spreadsheet is to keep track of job applicants. One column is used as a 'Recruiter Sign-off' area, where the recruiter who processed the application inputs their name:
Example.png
I'm trying to automate a variation of excels sort function. However, I don't want to sort 'From A to Z.' Instead, I want to have the rows of data sorted with the 'Recruiter Sign-off' column used as the sort Key, and a selected name (of one of the recruiters) used as the sort Criteria.
I already have a userform that allows the user to select a name from a listbox. When they press confirm, the name is stored in a Public String variable, (selectedRecruiter). I'd like then like to have the rows below the column headers to be sorted based on the selected name. Example: User selects the name "Jon" from a list. The application then brings all of the applicants that 'Jon' has signed off on (those rows that contain his name) to the top rows of the range.
The workbook is shared, so I cannot use tables.
I found a code that accomplished what I want, however it also leads to a horrible system crash after a few times running it (BEX crash).
I am trying to name a Range in VBA with the following Case statement.
Select Case counter Case "2": Set Wk(numWeeks) = Range("P1:Q136") ActiveWorkbook.Names.Add Name:="Wk" & numWeeks, RefersTo:=Wk(numWeeks)
I have many more cases and have defined Wk(5) as a Range. What I am really after it is possible to to name the range using something similar to the code above that uses a predefined variable in the naming process.
I have a string in a cell that contains a name, a 3-4 character alpanumeric code and then a 4-6 digit number, each separated by a space. An example or two:
J Bloggs SPEC 123456 J Smith AG06 9364 J & K Brown SWP 358686
I need to be able to have in a new cell the 4-6 digit number at the right of the cell. give a formula that will separate the data I need? I've tried numerous ways without success.
I would like to extract numbers based on the first 2 digits (22....) of a column along with its next column (on the right) and put them on another sheet.
I need to extract DIGITS from following: C23, C24, C515-C519. It may be done with regular expressions. Does anybody have experience with VBA code for RegEx?
I have in my cell a number, namely, 5260007005020024100055040300004110000000
What I would like to do is extract a set of digits from it,
Starting from the second 2, and shown here in the dots. I need all of the numbers in a separate cell, "52600070050200 .24100055.. 040300004110000000"
Hope this is clear. bearing in mind the number will remain as one so I would need to start at 14 then using LEN or something I'm not sure, extract the following 8 into another cell.
I basically I have a column with numbers. All the numbers are positive integers. What I like to do is have a VBA function that extracts the integers with the largest number of digits. So for example if we have the following column:
12
123
234
12346
2345
[code].....
So basically we search for largest number of digits, and extract the numbers that fit this category, which could be just one number or multiple numbers.
I'm working on a project where I need to prevent the user from entering non-digit string inputs. I've tried the using IsNumeric(MyString). but that doesn't prevent , + - signs to be entered. I also had to conditionally enable the input of a string with leading zeros like "01" so what I've ended up with is a rather messy looking' sub that handles this (don't know if forum rules allows me to show it here?). The problem is that I'm not a 100% sure that my sub fit to handle all eventualities so therefore my question is whether there is an easier, fool proof way to check my strings?
I need to calculate the sum of digits in a numeric string. The function should keep on adding the digits of each result, till the final sum is a single digit. Please refer to the following example and result expected:-
I have some code where I need to check if the first five char are numbers and not letters.
I have in a column for example 12345-someone is here 23456-someone else is here someone is here too
I need to get all of the ones that have 5 digits and not pull in the other into a new list.
I have tried Left(CPHierAll. Cells(CPHierAllRow, 1),5) which will get me the fist 5 char. and then i need to check to make sure that they are all numbers and not char.
if Left(CPHierAll.Cells(CPHierAllRow, 1),5) = "#####" then But this does not bring anything in.
I also tried if CPHierAll.Cells(CPHierAllRow, 1),5) = "#####" then
I have 3 column that i am checking for different thinks the first two work just find and seperate out on the check but the last one with the numbers is being a pain.
i have 1 - 9 number buttons, the +, - , * , / , and a C for clear, as well as an exit button. the display is a label. i have to click add after inputting the digits just to have it added to he variable, which i just add up at the end... terrible.
Option Compare Database Option Explicit Dim var1 As String Dim var2 As String Dim first As String Dim second As String Dim sign As String ' on load Private Sub form_load() Form.Caption = "this calculator lab sucks." Me.lbDisplay.Caption = "" End Sub ' on clear Private Sub cmdClear_Click() Me.lbDisplay.Caption = "" var1 = "" var2 = "" End Sub.............
I am using the following to check if a string has a sequence of 6 decimal digits in it. But am getting an error. If(str Like *######*). I have to check if str has values like 123456USA ; ABC725439 ; jh658478hd. I thought # represents a single digit and * represents any no of characters
I can't use the "" sign as delimiter to separate them into different columns because the age,city,name and height fields are in random positions on different cells.The good thing is person's name will always come after "name" string, age is alwals followed by "age" string, so it cannot be like nameheight40Michigan180
I think the following would be the easiest method(not for me tho).If on B1 I had a formula that said "find the string "name" and write anything after it until you reach the next "" character".On C1 field I could have a formula "find the string "age" and write anything after it until you reach the next "" character.On D1 I would have the same for "height" string,then on E1 for city string.
My question is somewhat similar to this one Extract A String Between Two Characters
Formula which outputs the data between 3rd and 4th instances of the "_" character.Can we substitute "3rd and 4th" with a specific strings like "age" or "height" ?
I have a problems here. The problems is attached in the file. I wanna extract alpha/char from a string. Example: I wanna extract the words "(M)" with the bracket from the string "Toothbrush (M)" in column A. After extracting the (M) out, I wanna do a validation to compare the (M) in column B with another data in column C, if the (M) is same as the data called "Medium" in column c, the validation will return "Match" in the column d!
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
I'm using a userform to create a new sheet. The form already creates the sheet and names it what was typed into the userform. Now I want it to place that variable in a cell along with a string. the following code will place the variable from the form (tbname) into cell b5.
I have a string that follows this format: SAMSUNG CT797F-1
From this string I need to extract 797F only. Further complicating the problem is that its not always SAMSUNG it could be ABB CT797F-1 or KOMSATISU CT797F-1
I have implemented a function that can extract all the numbers, but can't think of how to extract 797F from the various different strings.
I have a list of names in a data set like the examle below. I would like to be able to isolate the last name so I can match the data in this data set with a data set with additional information. The only common set of data I have is the first and last names.
