Insert A Bunch Of Pallet References
Feb 8, 2010
I need to do is be able insert a bunch of pallet references (manually, you will see a tab called 'Pallet Check' on the workbook attached) and then click a button that will check to make sure that those pallet numbers have been entered onto that workbook on one of the sheets from sheet1 to sheet100
If they are all ok I want it to return a value 'Pallet Reference Verified' in the column to the right of that pallet reference (column B) if it doesnt find that pallet then to return a value of 'Not Found'
I would also like to know if it finds any duplicates and if it does then return the names of the sheets that the ref is duplicated on (something like..... sheet3; sheet87) in column C for that ref i.e. pallet ref 'R6 10' has been entered so it will come back as being verified BUT it is also on another sheet which is bad so I want to know that it has been entered twice.
View 11 Replies
ADVERTISEMENT
Jul 26, 2007
I have a worksheet with many different formulas in many different cells. When I insert or delete a row, there is one formula in one cell that does update to reflect the change in rows. The cell is located several rows below the section where rows are changing. It is a simple formula too. Here is the formula: "= SUM($E$3:E11)*0.09". If I delete more rows that cause the highest row number to be less than 11, this formula updates. If I insert more rows and go beyond row 11, the formula does not update. I have tried using $E$11, $E11, and E$11 to no avail.
View 9 Replies
View Related
Aug 31, 2006
I'm working in a workbook with several sheets, the first two collums of each sheet are =to the first sheet. some times I need to insert a line, but when I did that, I need to type again all formulas or drag the previous ones, and format again the cells. is there another way to do this?
View 4 Replies
View Related
Feb 14, 2009
i am currently working with protected workbooks but i need to allow the use of autofilters and the colour pallet to allow colour changes/fill colour. Currently i am using the following code to allow the autofilter:
View 4 Replies
View Related
Sep 9, 2013
I am try to get the following VBA macro to work; however, I keep getting hung up on errors regarding the formula I am trying to input. It is getting hung up on the apostrophes and dollar signs. I am fairly new to VBA so I am lost when it come to converting my sheet formulas to VBA.
Code:
With ActiveSheet.UsedRange.SpecialCells(xlCellTypeBlanks)
.Formula = "=RAND()*0+VLOOKUP(INDIRECT(ADDRESS(1,COLUMN(),3),TRUE),INDIRECT("'"&TEXT(INDIRECT("$A"&ROW(),TRUE),"DD-MMM-YYYY")&" Inv'!"&"$J:$K",TRUE),2,FALSE)"
.Value = .Value
End With
View 3 Replies
View Related
Aug 28, 2008
One has the master data in it ( Item #Lot#/Cases per pallet/date ) = 30K rows
Second is the list of item #'s .
I need to find the MODE of cases/pallet by item number.
View 9 Replies
View Related
Mar 5, 2013
I just inherited an excel spreadsheet that has 10 tabs per every month in the year. Right now it is not that bad as there are only two months in the spreadsheet but I can see this being a headache to tab through later on in the year.
My initial thought is to make a table of contents worksheet that has a bunch of buttons (with macros) to hide/show tabs based on month. (Note: It would not make sense to consolidate the month worksheets into one as each worksheet already has a lot of data in it to begin with.
View 2 Replies
View Related
Nov 24, 2009
I have forms filled out by many, and I need to compile the information in it to create a list in my summary.
Is that possible?
fortunatly, the information always resides in the same cell on every file.
View 7 Replies
View Related
Mar 2, 2010
I have a column of cells over 2000 rows that have a bunch of text in each cell. In the middle of this text in each cell are websites (not hyperlinked). I was wondering if someone wrote a macro or formula to extract URLs located in a bunch of text? I can parse this out but doing some delimiting but that will take longer.
View 9 Replies
View Related
Jul 7, 2013
My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
View 12 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
View Related
Feb 28, 2007
i have a column (A) with a bunch of "K"s in it....scattered through 150k rows.
in column B, i have values for every row.
What formula in C1 will search col. A and return B values for All "T"s in column A?
View 9 Replies
View Related
Mar 2, 2009
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
View 9 Replies
View Related
Mar 23, 2012
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
View 2 Replies
View Related
May 7, 2009
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
View 9 Replies
View Related
Jul 31, 2009
What I'm wanting to do is essentially use a reference to update yet another reference.
In more detail, I want to retrieve a value on a worksheet and use that value to alter yet another reference to another worksheet.
For example, I want to retrieve a value (let say its 16 from either a local cell or a cell on another worksheet) and then retrieve yet another value from another worksheet based upon that value (lets say the worksheet I would want is then "Subject 16").
I've attempted various nesting formats of the typical reference formula but obviously have had no luck. Would I need to use VBA or is there a simple solution that I am missing? If I do have to use VBA how should I go about doing this?
View 14 Replies
View Related
Mar 11, 2009
for example, is it possible to check if a Reference to Set a reference to Microsoft Internet Controls (shdocvw.dll) has been enabled in user Reference settings. And if not set, then set it via VBA
View 4 Replies
View Related
Jul 13, 2006
For example
=SUM(INDIRECT(C10))
where C10 would contain
="Sheet2:"&"Sheet3!"&"A"&ROW()
always returns #REF!.
However, ="Sheet3!"&"A"&ROW() as the Cell C10 entry will work fine.
View 10 Replies
View Related
Aug 25, 2008
15.2
13.9
6.1
9.19
and i wanted to divide these all by 4.
I can do this by clicking on a cell OTHER than one of those four above, and do:
=A1/4 (if 15.2 was A1) and copy that formula down.
But then I have the originals AND the new ones in separate columns.
I want to just be able to divide those original numbers by 4 without resorting to using other cells, but if I do =A1/4 on A1 itself it says that i have made a "circular reference"
View 9 Replies
View Related
Sep 7, 2006
I'm trying to connect to SAP R/3, and I think I'm not sure which references (Tools --> References) I'm supposed have checked.
All I want to do for now is the following:
Dim sapConn As Object
Set sapConn = CreateObject("SAP. Functions")
Unfortunately, I am getting a "Run-time error '-2147024770 (8007007e)': Automation error. The specified module could not be found."
I have read somewhere random on the internet that I should add "SAP:Remote Function Call: COM Support 1.0 Type Library" which links to the SAPGui Provided library librfc32.dll. However, this alone doesn't seem to work...
View 5 Replies
View Related
Jul 28, 2014
Running a worksheet with vba, at the start of the code I turn warnings off and at the very end of the code I turn them back on.When the routines complete a warning is raised:
A formula in this worksheet contains one or more invalid references.
Verify that your formulas contain a valid path, workbook, range name, and cell reference.
When I run Error Checking everything comes up clean.
Clicking on "Show Formulas" shows no formulas for there are no formulas on the sheet to show, just a chart, and clicking "Show Formulas" just turns my dates into serial numbers and screws up the display of the two comboboxes, messing the fonts and drop-down arrows, and since closing and reopening didn't revert the comboboxes back to normal I will now have to blow them away and resurrect them. I also see Show Formulas also messed up my command buttons. nice...
The only way I find to avoid the error is to turn Warnings OFF at the start of the charting routine and NEVER turn it back on.
I made certain that none of my names had any errors in them. Everything looks proper. So what next?
I fear something will create an error for me now along the lines of Murphy's Law
View 2 Replies
View Related
Mar 1, 2007
I update files monthly and save them each month with a new name (eg. Jan, Feb, etc.).
In the file I have a reference from one tab to another tab within the same file. So every time I re-save this file with a new name, it should still reference the cell in the other tab - same file.
BUT on 2 occasions this reference changed to an "external" reference to the previous month's file.
I've been doing this every month for over 2 years and this problem has only happened 2 times. I know others that have experienced this, but nobody knows what caused it.
Does anyone know what would cause this? The biggest problem is that I may not notice this has happened for a long time.
One other thing I might add. I use an older version of Excel (2000). I share these files with other people who may have newer versions (I'm not sure who has what). Can sharing these files with others over a network system have something to do with this? Can opening "read only" when someone else is in the file and then saving as a copy do this?
View 11 Replies
View Related
Oct 9, 2008
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
View 4 Replies
View Related
Aug 11, 2009
is it possible to use references and concatenate them together that they are still references?
i have in:
file1.xls
sheetX:
A1: 'C:Infonic[file2.xls]sheet2'
file2.xls
sheetY:
A1: test
what i need is in sheet2 of file1
the value of file2.xls!sheetY!A1 = test
the problem is that i need to use the path to file2!sheet2 of the cell A1 in sheetX
is it possible to use sheetXA1 together with sheetYA1 as reference in sheet 2 so that i get back test as value.
View 10 Replies
View Related
Aug 13, 2009
I'm trying to use this formula in a cell but it keeps giving me #NAME.
What does this mean?
View 8 Replies
View Related
Oct 29, 2009
I have 2 colums like this. And I want whenever there is a reference like this âë. "some word" in column 2, to have the macro look up some word entry in column 1, find the text in the same row in column 2 and replace the âë. "some word" reference with the text found in column 2. (See attached, sheet 1 as it is, sheet 2 as I want it to be).
Sheet 1
another wordâë. "some word"
awordìåôÜöñáóç
bwordâë. "aword"
some wordêÜðïéá ëÝîç
Sheet 2
another wordêÜðïéá ëÝîç
awordìåôÜöñáóç
bwordìåôÜöñáóç
some wordêÜðïéá ëÝîç
View 9 Replies
View Related
Jan 24, 2010
I suspect there's a simple answer to this but I've looked and can't find it: In Excel 2003, when I add a hyperlink to another file and close/reopen my workbook, the link is saved as relative to the current workbook. So if the main workbook is moved or, in my case, when I use VBA to copy and email the sheet with the hyperlinks, the links are broken.
View 2 Replies
View Related
Feb 18, 2010
I have a problem with my references when sorting in excel. I have been searching for the problem, but did not found a useful solution.
I'm using excel 2003.
Let me try to explain my problem with a simple exampel.
I have a column with numbers and one with formulas pointing at these.
A B
2 =A1
4 =A2
3 =A3
Now I want to sort column A, and the column B should keep pointing at the original number. So I want this:
A B
2 =A1
3 =A3
4 =A2
But I get this:
A B
2 =A1
3 =A2
4 =A3
This output is what I would expect if I used absolut reference($).
Using offset(B1;0;-1) will work, but I cannot use this, since I will add/delete rows and the reference is not neccessarily next to it. Plus it can be a rather large sheet.
I cannot use dynamically name definition either, because it is intended for other users, and this will be too much work for them. What I basically need is a simple formula they can enter.
My sorting is done via a VBA macro, so if there is anything I can do through macro/VBA that will be okay as well, since I can do this without the user seeing it.
View 14 Replies
View Related
