I want to insert blanks rows above rows that have the number 1 inserted in column C.
I about 60,000 rows in all, doing it manually takes forever because I have to keep waiting for Excel to push the rows down every time I insert a new row.
Is there an efficient way to grab all the rows with a 1 in column C and insert rows in one swoop? If not, I will settle for any way other than manually.
Column 'A' in my spreadsheet has cells with a number in and blank cells in no particular order. What I need to do is insert a new row above each number but I don't know how to write this as a macro.
below image of a spreadsheet i'm working on.
There's roughly 4000 rows of data and if there's not a quick fix with VBA then i'm going to be spending hours manually adding rows.
Column B houses the Group Code, what I need to do is add 2 blank rows between each group code making sure the data stays relevant to the code it is next to currently.
So looking at the pic below, I would want something like this: .......
I was wondering if someone might be able to assist me with using VB to insert a new row below a cell containing specific text.
For example:
- All of my data is in column A
-I want to scan all of column A, and if there is a cell that contains "ACHCAMERIGROUP M", then I want a blank row inserted below it. If column A does NOT contain that text....do nothing.
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have a range of numbers in a single column and I want to insert a blank cell or line below each cell in the range. Is there a quick way to do this, by not using VBA.
View 3 Replies View RelatedI have the following macro that inserts a blank line when a field changes. This works fine. However I would like to use this in another spreadsheet that has several addition columns of unrelated data. Therefore I want to insert 1 (row of) blank cells only in the columns specified in the range. The range is 3 columns wide, E - G. I think I'm close, but ...
Dim myRow As Long
myRow = 3 'data starting row
Do Until Cells(myRow, 5) = "" ' the # is the column that changes which I want to trigger a blank insertion
If Cells(myRow, 5) = Cells(myRow - 1, 5) Then
myRow = myRow + 1
[Code] ..........
I have in column D 1200 rows of data. I need to insert a blank cell after every 10 rows. Is there a formula or code to do this?
View 9 Replies View RelatedI have a spreadsheet that I need to insert a blank row every other row and then merge that blank row. I can do this with the macro below. My question is that I only want the merge on each blank row to merge A:H. Example would be insert row 9 and merge A9:H9. Insert row 11 and merge A11:H11. and so on till the end.
Code:
Sub insertrow()
Application.ScreenUpdating = False
Rows("9").Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.EntireRow.Insert
ActiveCell.EntireRow.Merge
ActiveCell.Offset(2, 0).Select
Loop
Application.ScreenUpdating = True
End Sub
but this time, the numers of duplicates is variable:
before:
---A
1-6
2-6
3-6
4-1
5-1
6-9
7-9
8-9
9-9
ETC.
and after I want to:
---A
1--6
2--6........
I have this code which adds a blank row above the name "EV01_" where it appears. ...which works fine, but only works for half the rows.
[Code] ....
I want my macro to consider the # of rows of data on a spreadsheet and insert values into columns for those rows but then stop when it hits a blank one. For simplified example below, I have 3 columns in my spreadsheet. Row 1 has headers of Location, Status, and Effective Date. The first 5 rows of data under the headers have a value in the Location column (San Jose, Oakland, etc). When I run the macro, I want it to insert a value of "ACTIVE" in the Status column for each row that has a value in the Location column. Also, a single Effective Date value is stored in a cell elsewere in the spreadsheet, and I want the macro to insert that value in the Effective Date column for each row that has a value in the Location column. When it hits a blank row - row 7 in this spreadsheet - I want it to stop.
Location| Status | Effective Date
San Jose
Oakland
Austin
Houston
Phoenix
I currently am using an IF statement in the Status column fields to say if Location = blank, then blank, else "ACTIVE". That works, except that the # of rows populated in Location column could be 5 or 1,000, and inserting the formula that many times seems to quickly increase the file size.
I am trying to accomplish three things with the attached workbook. The first thing is the insert a blank row between the different part numbers, column "A" to make the sheet easier to read. The second thing is to highlight the data in light gray (A:E) leaving the blank row that was created empty. The third is to then sort the worksheet by data in column "A" to group like numbers together.
View 12 Replies View RelatedI am trying to write a macro which will insert a blank row at the end of each year(A column) (Last cell i.e Dec 95 and so on).
I have attached the file for the same ....
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
Note: Split from: VBA to insert page breaks at a blank with varying blck size
I would like my macro to add empty lines to each pages not completely filled. (you know when it removes a block from a page, there's always some free space at the bottom of that page) Is it possible to add blank row (from a certain template on another sheet that I have) until it's full?
I have a spreadsheet containing hours logged against a specific project, all of which have a 'Week Beginning' date.
I would like a macro to insert two rows above a change of date (in the D column). How best should this be done?
It's basically a formatting macro I'm after, to group records by 'Week Beginning' date.
I've spotted a few similar requests, but none of them appeared to include the function to check for a change in date, from the cell above.
I have a dataset that i want to update, to do this I want to insert 8 rows after each row that has a value in Column C 2000. The set has 600,000 rows, comparing countries (cty, cty2) from 1980-2000. I want to make room for information up till 2008. I see lots of codes for doing this but I will also need help with actually inserting into my spread sheet.
View 3 Replies View RelatedI have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
I need to insert blank rows at the end of the each data segment to add totals for each individual. Is there a macro that I can use for this? I'm attaching an example file.
View 8 Replies View RelatedA macro that will delete a tab or tabs in a file if and only if rows 11, 13, 23 & 25 are completely blank within that tab?
So basically ALL rows would need to be blank, if there is any data within any of those rows, then tab should NOT be deleted.
We have a schedule that creates an Excel file which separates each order by blank rows. I need each order to be separated by a page break, so each order prints on a separate sheet.
Each order entry is 1 or 2 rows
Using Excel 2010/2013 although the file produced is an xls file.
Columns A to J are populated
Rows 1 & 2 are the header
I have tried a macro that involves me doing a countif and counting entries in the row, and if they add to 10 it inserts a page break, but its bit long winded and only seemed to work once.
I'm trying to figure out the if conditions for this relatively simple problem. Basically, this is an import from a word document where the table strays onto a new page. I want to try and repair this with a bit of VBA.
This is what it looks like:
1: cell 1 |the content should all be in this cell
2: |but the import sometimes splits it into two
3: cell 2 |
Basically if and only if cell Ax is blank (in this example A2), then I want the rows to merge each cell and repair the table.
I have a spreadsheet with columns and columns of data. What I'd like to do is identify which rows have blank/no data in all specified columns (H, K, O, S, U, W, and Y).
To clarify, I need to identify each row where all of these columns are blank (as opposed to each row where at least 1 column is blank).
I have a data copied from pdf to excel and need to segregate the data page wise so i need a macro to set the pages in specific cells example page 1 ranging from A1 to A60
Page 2 ranging from A61 to A120 and so on
Example of pdf data
PAGE 1 Should be in cell(A1 to A60) - Data can be less than cell A60 but page 1 should be within this range
A 1
CHURCH 6
HOUSE 5
[Code] ......
PAGE 2 Should be in cell(A61 to A120) - Data can be less than cell A120 but page 2 should be within this range
A 1
CHURCH 6
HOUSE 5
[Code] ........
I need a VBA to delete rows with blank cells within columns F - AZ
Columns A - E contain headers but also need to be deleted if cells in columns F -AZ are blank.
how to exclude a blanck cell from logic?
I have tried what you see below but neither works as desired.
If Not vData(n, 9) = 0 Then
If Not vData(n, 9)Is null Then
have corrected code error
I have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.
If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
