I am trying to accomplish three things with the attached workbook. The first thing is the insert a blank row between the different part numbers, column "A" to make the sheet easier to read. The second thing is to highlight the data in light gray (A:E) leaving the blank row that was created empty. The third is to then sort the worksheet by data in column "A" to group like numbers together.
View 12 RepliesI would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have a range of numbers in a single column and I want to insert a blank cell or line below each cell in the range. Is there a quick way to do this, by not using VBA.
View 3 Replies View RelatedI am having to write a vba code for a survey data captured code online.
I am attaching the code and the vba module that is suupose to do
following things
2) dELETES THE LAST 3 COLUMNS
3) Initial 6 letters from each cell (Q0001=) UPTO (Q00011=)
4)Inserts new row at top from Q1 TO Q11
5) Sorts data on Q6 (Faculty/Staff)
Before all this the i need to insert blank cells for questions that have not been answered and shift the cells right (condition 1) ....
I have the following macro that inserts a blank line when a field changes. This works fine. However I would like to use this in another spreadsheet that has several addition columns of unrelated data. Therefore I want to insert 1 (row of) blank cells only in the columns specified in the range. The range is 3 columns wide, E - G. I think I'm close, but ...
Dim myRow As Long
myRow = 3 'data starting row
Do Until Cells(myRow, 5) = "" ' the # is the column that changes which I want to trigger a blank insertion
If Cells(myRow, 5) = Cells(myRow - 1, 5) Then
myRow = myRow + 1
[Code] ..........
I have in column D 1200 rows of data. I need to insert a blank cell after every 10 rows. Is there a formula or code to do this?
View 9 Replies View RelatedI have a spreadsheet that I need to insert a blank row every other row and then merge that blank row. I can do this with the macro below. My question is that I only want the merge on each blank row to merge A:H. Example would be insert row 9 and merge A9:H9. Insert row 11 and merge A11:H11. and so on till the end.
Code:
Sub insertrow()
Application.ScreenUpdating = False
Rows("9").Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.EntireRow.Insert
ActiveCell.EntireRow.Merge
ActiveCell.Offset(2, 0).Select
Loop
Application.ScreenUpdating = True
End Sub
but this time, the numers of duplicates is variable:
before:
---A
1-6
2-6
3-6
4-1
5-1
6-9
7-9
8-9
9-9
ETC.
and after I want to:
---A
1--6
2--6........
I am trying to create a macro that sorts rows based on value of 2 columns, but every time that a value changes in either of them to leave an empty row between them. Is that possible? In simple words i want to separate my rows with the empty row while sorting them out alphabetically based on two columns.
Please check my screen shots. Test 1 is my spreadsheet before the macro. Test 2 is how i need it to be after the macro. The two columns that i want it sorted out is First GDS then Rate.
I have this code which adds a blank row above the name "EV01_" where it appears. ...which works fine, but only works for half the rows.
[Code] ....
I want my macro to consider the # of rows of data on a spreadsheet and insert values into columns for those rows but then stop when it hits a blank one. For simplified example below, I have 3 columns in my spreadsheet. Row 1 has headers of Location, Status, and Effective Date. The first 5 rows of data under the headers have a value in the Location column (San Jose, Oakland, etc). When I run the macro, I want it to insert a value of "ACTIVE" in the Status column for each row that has a value in the Location column. Also, a single Effective Date value is stored in a cell elsewere in the spreadsheet, and I want the macro to insert that value in the Effective Date column for each row that has a value in the Location column. When it hits a blank row - row 7 in this spreadsheet - I want it to stop.
Location| Status | Effective Date
San Jose
Oakland
Austin
Houston
Phoenix
I currently am using an IF statement in the Status column fields to say if Location = blank, then blank, else "ACTIVE". That works, except that the # of rows populated in Location column could be 5 or 1,000, and inserting the formula that many times seems to quickly increase the file size.
I am trying to write a macro which will insert a blank row at the end of each year(A column) (Last cell i.e Dec 95 and so on).
I have attached the file for the same ....
I want to insert blanks rows above rows that have the number 1 inserted in column C.
I about 60,000 rows in all, doing it manually takes forever because I have to keep waiting for Excel to push the rows down every time I insert a new row.
Is there an efficient way to grab all the rows with a 1 in column C and insert rows in one swoop? If not, I will settle for any way other than manually.
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
Note: Split from: VBA to insert page breaks at a blank with varying blck size
I would like my macro to add empty lines to each pages not completely filled. (you know when it removes a block from a page, there's always some free space at the bottom of that page) Is it possible to add blank row (from a certain template on another sheet that I have) until it's full?
I have a spreadsheet containing hours logged against a specific project, all of which have a 'Week Beginning' date.
I would like a macro to insert two rows above a change of date (in the D column). How best should this be done?
It's basically a formatting macro I'm after, to group records by 'Week Beginning' date.
I've spotted a few similar requests, but none of them appeared to include the function to check for a change in date, from the cell above.
I am trying to educate myself in the wonders of Excel (2003) and an struggling somewhat.I have a small project loosely based on a shops stock control and have attached a copy of the workbook -
The user normally only has access to columns B, C and E due to the others being locked and the sheet protected.I would like the sheet to be automatically sorted based on column E each time the workbook is opened.I then need to automatically delete a row once an item in column B has been removed (made blank)
I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
I need to insert blank rows at the end of the each data segment to add totals for each individual. Is there a macro that I can use for this? I'm attaching an example file.
View 8 Replies View RelatedWe have a schedule that creates an Excel file which separates each order by blank rows. I need each order to be separated by a page break, so each order prints on a separate sheet.
Each order entry is 1 or 2 rows
Using Excel 2010/2013 although the file produced is an xls file.
Columns A to J are populated
Rows 1 & 2 are the header
I have tried a macro that involves me doing a countif and counting entries in the row, and if they add to 10 it inserts a page break, but its bit long winded and only seemed to work once.
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
Is there any way to sort a spreadsheet by the highlight colors? For example, if I have a sheet that has some rows in blue, some rows in red, and some rows in yellow is there any way to group them all together by color ?
View 8 Replies View RelatedI have an excel spreadsheet that shows every other row in a pale blue. When I do data sorts, the rows loose their order. Is there a way to keep the row color in every other row and still keep it that way after the data is sorted?
View 2 Replies View RelatedIf the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View RelatedI got a code in internet that highlight a cell with equal value after double clicking a cell.
But my problem is I want to clear highlighted cell after clicking another cell (making double clicked cell inactive).
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim c As Range
Dim FirstAddress As String
Dim wksh As Worksheet
Static ColIdx
Cancel = True
[Code] ..........
I would like to ask if it is possible to sort a range of row? What I mean is, if I sort like Row 1, the entire block of row 1 will move as well? Like if i have column A to F, then row 1 of column A to F will move together at the same time.
View 3 Replies View RelatedI have a bit of code that should find a blank cell within a column and paint that cell as a color 6 (color of a yellow highlighter).
View 5 Replies View RelatedI am woundering if there is a bit of VBA script that will highlight the next blank row, to enter a new record in a Excel datalist?
View 6 Replies View RelatedI would like to find a value w/i a column after sorting and insert a row right above it. After that I would like to sort again from that point downward.
View 2 Replies View Related