I need to insert blank rows at the end of the each data segment to add totals for each individual. Is there a macro that I can use for this? I'm attaching an example file.
View 8 RepliesI need to alter this code in order to do 2 things
1. to leave a blank line inbwteen Shop A's Apples, Shop A's Pears etc
2. I also wanted to total up the price totals....(see example below).So if the last price was in E4, the total of all those prices above would show in F5 ....
trying to insert rows into certain sections of a large data set.
Currently, there are over 25k rows of data and I need to insert individual blank rows between certain lines. The process is too daunting to try and do it individually (CTRL+Click row number) so I need to find a way to do it based on a specific number in one of the columns.
I can insert individual rows after filtering the data to only show the rows that need blank sets under them
I've included a sample to illustrate my point. There needs to be a blank row before every row with a "1" in the "count" column.
Data Sample.xls‎
I am working on the evaluation of a survey. I had 212 respondents which could be divided into three distinct groups. I would like to present the results of a question in columns that reflect the total frequency count in percentages. At the same time I would like those columns to be stacked in order to illustrate the contribution each group has made to that particular answer. I have attached an xls file with the data and a demonstration of the outcome I am trying to achieve.
I haven't been able to create the graph so that the columns display the total count in relation to all respondents on the one hand and at the same time are broken up into the individual groups. Among others, I have read the thread: http://www.ozgrid.com/Excel/stacked-column.htm but that doesn't answer my question as the Total there is actually the cumulative total of the other values.
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have a range of numbers in a single column and I want to insert a blank cell or line below each cell in the range. Is there a quick way to do this, by not using VBA.
View 3 Replies View RelatedI have the following macro that inserts a blank line when a field changes. This works fine. However I would like to use this in another spreadsheet that has several addition columns of unrelated data. Therefore I want to insert 1 (row of) blank cells only in the columns specified in the range. The range is 3 columns wide, E - G. I think I'm close, but ...
Dim myRow As Long
myRow = 3 'data starting row
Do Until Cells(myRow, 5) = "" ' the # is the column that changes which I want to trigger a blank insertion
If Cells(myRow, 5) = Cells(myRow - 1, 5) Then
myRow = myRow + 1
[Code] ..........
I have in column D 1200 rows of data. I need to insert a blank cell after every 10 rows. Is there a formula or code to do this?
View 9 Replies View RelatedI have a spreadsheet that I need to insert a blank row every other row and then merge that blank row. I can do this with the macro below. My question is that I only want the merge on each blank row to merge A:H. Example would be insert row 9 and merge A9:H9. Insert row 11 and merge A11:H11. and so on till the end.
Code:
Sub insertrow()
Application.ScreenUpdating = False
Rows("9").Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.EntireRow.Insert
ActiveCell.EntireRow.Merge
ActiveCell.Offset(2, 0).Select
Loop
Application.ScreenUpdating = True
End Sub
but this time, the numers of duplicates is variable:
before:
---A
1-6
2-6
3-6
4-1
5-1
6-9
7-9
8-9
9-9
ETC.
and after I want to:
---A
1--6
2--6........
I have a workbook populated with values in 3 columns. The values of the second column group rows into larger segments. I want to pull one row for each different value onto a different sheet.
example:
1. apple
2. apple
3. apple
4. apple
How do I only pull one row of apples onto another sheet without copying by hand? I have attached an live example. I want to pull one row for each classification (column 2) named on the sheet without copy/pasting each one.
i have a large table, columns A:F, would like a code which would look at the text in column F and create a new row for each bit of text separated by comma
probably easier to show what i mean, here is a section of the table, in this example store 13121 needs multiple rows.
start with this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th { background-color: #104E8B;
[code] ......
and turn it into this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th {
[Code] .....
I have this code which adds a blank row above the name "EV01_" where it appears. ...which works fine, but only works for half the rows.
[Code] ....
I want my macro to consider the # of rows of data on a spreadsheet and insert values into columns for those rows but then stop when it hits a blank one. For simplified example below, I have 3 columns in my spreadsheet. Row 1 has headers of Location, Status, and Effective Date. The first 5 rows of data under the headers have a value in the Location column (San Jose, Oakland, etc). When I run the macro, I want it to insert a value of "ACTIVE" in the Status column for each row that has a value in the Location column. Also, a single Effective Date value is stored in a cell elsewere in the spreadsheet, and I want the macro to insert that value in the Effective Date column for each row that has a value in the Location column. When it hits a blank row - row 7 in this spreadsheet - I want it to stop.
Location| Status | Effective Date
San Jose
Oakland
Austin
Houston
Phoenix
I currently am using an IF statement in the Status column fields to say if Location = blank, then blank, else "ACTIVE". That works, except that the # of rows populated in Location column could be 5 or 1,000, and inserting the formula that many times seems to quickly increase the file size.
I am trying to accomplish three things with the attached workbook. The first thing is the insert a blank row between the different part numbers, column "A" to make the sheet easier to read. The second thing is to highlight the data in light gray (A:E) leaving the blank row that was created empty. The third is to then sort the worksheet by data in column "A" to group like numbers together.
View 12 Replies View RelatedI am trying to write a macro which will insert a blank row at the end of each year(A column) (Last cell i.e Dec 95 and so on).
I have attached the file for the same ....
I want to insert blanks rows above rows that have the number 1 inserted in column C.
I about 60,000 rows in all, doing it manually takes forever because I have to keep waiting for Excel to push the rows down every time I insert a new row.
Is there an efficient way to grab all the rows with a 1 in column C and insert rows in one swoop? If not, I will settle for any way other than manually.
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
Note: Split from: VBA to insert page breaks at a blank with varying blck size
I would like my macro to add empty lines to each pages not completely filled. (you know when it removes a block from a page, there's always some free space at the bottom of that page) Is it possible to add blank row (from a certain template on another sheet that I have) until it's full?
I have a spreadsheet containing hours logged against a specific project, all of which have a 'Week Beginning' date.
I would like a macro to insert two rows above a change of date (in the D column). How best should this be done?
It's basically a formatting macro I'm after, to group records by 'Week Beginning' date.
I've spotted a few similar requests, but none of them appeared to include the function to check for a change in date, from the cell above.
I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
We have a schedule that creates an Excel file which separates each order by blank rows. I need each order to be separated by a page break, so each order prints on a separate sheet.
Each order entry is 1 or 2 rows
Using Excel 2010/2013 although the file produced is an xls file.
Columns A to J are populated
Rows 1 & 2 are the header
I have tried a macro that involves me doing a countif and counting entries in the row, and if they add to 10 it inserts a page break, but its bit long winded and only seemed to work once.
Is there a way to insert a blank row between every row with data? This is for very large spreadsheets when adding blank rows individually is not an option.
Example:
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Needs to look like this:
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
I am having an excel file in which there is information about 100 products. Every product has around 10-15 features. This way I have 1,000 rows. Every product has its own unique ID i.e. every 10 rows have the same ID thereby making 100 ID's. Now I want to insert a blank row every time the product ID changes so that I can discriminate better between the products. Is there some formula?
A
A
A
A
A
B
B
B
B
C
C
C
C
I want to insert blank rows before B and C. If the number of features were constant, it would have been easy for me.
Need a VBA macro that is similar to the subtotals function but without the subtotals? Basically I want the macro to look at column A and say, for each change in column A insert a blank row… I don’t need to worry about the sorting, I just would like to know how I can tell a spreadsheet to look at a column find changes in that column and just insert a blank row. On the second page of the attached spreadsheet is an example of the desired output… I will probably use this for many different spreadsheets so the simpler and more versatile the better, ie I can change the column I want the macro to look at.
View 3 Replies View RelatedI have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I have a pivot table with 3 levels of titles in the Row Labels - Grouping, SubGrouping and Name. In many cases there is a Grouping but no SubGrouping and always there is data in the "Name" category. I am trying to eliminate the Subtotal for the blank SubGroupings but when I try to filter out the blanks it no longer shows me any Groupings where a SubGrouping doesn't exist.
View 1 Replies View Relatedsee the attached workbook with two different sheets (same data) using different formulas. Each has problems (red text) preventing me from moving forward.
I need to calculate time in level 1, time in level 2 and total time for each row and then be able to sum for the month. Unfortunately, sometimes there is missing data, but I still need to calculate everything possible using a consistent formula that can be applied to the column/row universally.
i have a list of numbers in column A and in column B every now and then a * will appear next to a number. The first number will always have a * next to it. Basically i'm looking for a way to say...that either by copying to another tab or inserting rows on this tab, do the following for every number.
Insert a row above that says
[pf6]
put a " next to the number so that it reads as below
"408425
and then the following in new rows as below.
[enter]
[tab field]
[tab field]
[tab field]
[tab field]
"1.5
[field+]
[pf5]