I have an excel spreadsheet set up as shown in the attachment. When I insert data by using the macro (Insert farm), for some reason it puts a NA in a cell (C17).
I then select the cell click into the formula and click enter and it works. how can this be fixed. Look at the excel spreadsheet to be able to understand.
I've got a problem that's causing me a headache. i have a document with 1 column and 4000 rows (its an export from active directory).
I need to do a search cell by cell (so A1 - A4000) for any cells that contain the text "changeType". When a cell is found, i need excel to insert a new row above the current cell and insert the text "modify" into the new row (in the first column).
I am trying to write a formula to insert in a macro for multiple lines of data.
Column B contains the date that I am comparing the date in Column C against. I want to be able to highlight the content on that row if the date in column C is greater than or equal to column B. how to write this?
I would need row 1 and 4 to highlight in red. this is part of a long Macro that is written and includes many other steps, but I cannot seem to make this step work correctly.
Worksheet excel with multiple lines and colums. I need a macro to automatically insert a new Line where the cursor is located, and duplicate data from previous cells: let say cursor is located L10, macro will insert L11, and duplicate L10 -C1 data to L11 -C1. I have a macro that does this function, but the Line insertion is always at the same line.May be the macro should "read" first the cursor position, Lx and then move down +1 line prior to duplicate the data.
I have written the below code to enter some formulas, validation, and formatting. I keep running into a problem when trying to add the first validation. The debug msg is...
Run-time error '-2147417848 (80010108)': Automation error The Object invoked has disconnected from its clients.
I'm looking for a way to write a macro to insert 5 lines at the end of the data in column A. Then I want to copy a range into the newly inserted lines. I would press a button anytime I need this to occur.
Current last line of data A39
Need to insert 5 rows after A39
Then copy range BA30:CB34 into the newly inserted rows.
I want to insert a cell reference into the code below to replace the hard coded "100500" so the value in cell A1 replaces the criteria below. Is this possible ?
I am working with a spreadsheet generated from software that keeps track of fuel usage for a large fleet of vehicles. The data comes out looking like the snapshot below.
******** ******************** ************************************************************************>Microsoft Excel - June Fuel Transaction Listing.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA3=ABCDEFGH3 Transactions for CUSTOMER ID: 0000CUST7 Sales 4 5 6Product summary for Vehicle ID 00001080 7 8Product Description Transactions Quantity9 101 Unleaded 3 57.60 GL11 12Hose summary for Vehicle ID 00001080 13Site ID HoseGradeProductTransactions Quantity140001 2113 57.60 GLJune Fuel Transaction Listing [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to get the data into a more convenient format for analysis. I need a macro that will:
1) Take the text "Product summary for vehicle ID 0000****", extract the last 4 digits of the text, and paste it where the 1 is under the Product heading (a10). Those digits are the actual fleet number, and I need to separate them out from the rest of the text. The digits will change for each vehicle, so the macro should just move down the spreadsheet doing the same thing for each instance (the setup you see is repeated for every vehicle).
2) Once the first goal is accomplished, I would like the macro to then go back through and delete every row except for the rows with the pertinent data in them. So this means I would only want one row per vehicle and all rows would line up directly below each other like demonstrated below.
******** ******************** ************************************************************************>Microsoft Excel - June Fuel Transaction Listing.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA10=ABCDEFGH101080 Unleaded 3 57.60 GL111081 Unleaded 6 84.70 GL121122 Unleaded 5 47.00 GL131182 Unleaded 8 95.80 GLJune Fuel Transaction Listing [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I need to open a customer-submitted workbook which has a list of items in column B, marked by an 'X' in column A on selected rows. Each customer's list is tailored to them with, say, 25 rows each.
I have a master list with identical formatting but which has the data from ALL lists combined.
I want to insert an 'X' in column A of my master workbook for any matching items for which there is an 'X' in column A of the customer's workbook.
I could do this with a formula in column A of my master list, but each customer's workbook has a unique filename and I don't know how to make the formula use a changing lookup array, so I figured this is something that I have to accomplish with VBA.
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
An external data web query points to a web site that offers a foreign exchange rate calculator. In my browser, I selected the specific currency pair I need and used the resulting url in the web query. The "New Web Query" pane resolves the url correctly and allows me to select the table data I want (the little yellow arrow turns to a green check mark). However, when I hit "Import" and select the target cell, the only data returned is the parameters from the url and an error msg (This web query returned no data...). How do I get the query to pass the parameters to the website correctly?
I would like to find the code to make a button in excel, that when clicked, will insert a new row into the last row of a section so that the formatting is the same as a sample of other rows in that section, but it will be clear of data and only contain the correct formatting. I would also like this code to make a sum formula in a cell below the newly inserted row to change and to include the new cell within its formula.
For example:
I have a form on excel that has space for 6 rows of data with 3 pieces of information (which are: item, section, cost). If / when I need to add a 7th line I have box that I would like to assign a macro to so that when I click on it, it adds a 7th line with the same formatting that can be found in rows 1-6 but will be void of data. However, under the 6th row I have a total of the 'cost' with an '=sum(D7:D12)' formula and any other code I have found and have used it does not automatically tell the formula to add an additional cell to its summation to make it =sum(D7:D13).
I'm working on this sheet where I need to first, sort the invoices by the due date. separate due and not due. for example, due date is 05/05/09 (pls see sheet 2). a blank row is then inserted (above the undue invoices) with "total due to pay" then the sum for due invoices.
for the invoices not due, i need to sum those also and finally, the total of the two figures at the very bottom. I need a macro code to run when the list contains hundreds of invoices.
I hav a macro to insert a new row. But i also want the macro to ask the user to input where he wants(which row number) to insert the new row??
For example when i run the macro, an inputbox should come up asking to input the row number. The user should be able to enter the row number (take 10 for now). And Excel should automatically insert a new row in row number 10. So the previous row 10 now becomes row 11.
I feel like this is textbook to the point of being in FAQ but couldnt find it, so if the answer indeed exists in FAQ - notify me of the url and i will refer to that instead. But my question is fairly simple, I'd like to have a macro run upon the insertion of a row.
how to automaticly create a new row below the last data entry. I have a list of items with relevant data in each row. But below all the data I have statistics of total percentages of certain things. I want to keep that at the bottom of the list. When I add another row for more information I want those statistics to jump down a row so I have more blank rows to add in more data. Is there an easy way to do that?
Also something kinda related. I know you can freeze rows and columbs at the top and left of the spread sheet, is there any way I can freeze those statistics at the bottom so they are always visable but the data on top of it can scroll through? I dont want to split the page cause that kinda causes more problems.
I would like to automatically insert a row at each change in value in one column. See the attached sample. When the value in column C changes, I would like a row inserted. Preferrably without using any macros because they are way beyond my skill level and understanding
I need Macro to insert a specified number of rows in one worksheet and the same number but columns in another worksheet.
The rows are inserting fine but I can't get the columns to work. Here is what I have so far:
Sub InsertRows_Columns() Dim iRows As Long, rngStart As Range On Error GoTo Canceled iRows = InputBox("How many unit rows would you like to insert?", "Number of Rows", 5)
I once heard that in order for a macro to insert a formula you must double all the quotations. Anyway, i did so in the following macro but i got an error message.
I've got a list of postcodes in one column and some of the postcodes do not have the correct amount of spaces between the characters.
So I'm looking to have a macro that will insert a space after each third character and then possible a separate macro to insert a space after each fourth character.
I have a worksheet that includes the list of buildings in an area and the number of households in each building. I want to list the households on separate rows and to number them from 1 to x according to the total number I have. Is it possible to do this using a macro, if so, how?
I'd like to use a button to run a macro that inserts a combo box, but can't seem to change the properties of that box within the macro. For example, I need to enter the linked cell, but when I run the macro, the actions in the combo box's properties dialogue don't record (I'm not familar with visual basic, so I'm 'recording' the macro).
I've created a macro to assign to a button that inserts a row above say row 10, then another macro to assign to a different button that inserts a row above row 20. My problem is, having clicked the first button a row is inserted above row 10 but of course row 20 now becomes row 21, so now I need the second button to insert a row above row 21 instead of 20.
Is there any way I can write a macro that remembers the old row numbers?
My sheet needs to insert a blank row under a number everytime it changes. The column "C" may have 20 or so rows with the number 10 for example, the next five might be the number 8, I need a row between the last number ten and the first number eight. This may be repeated many times through the spreadsheet.
As well, the adjacent columns "D" & "E" are the same as described above. all 3 columns are continuous ie: ....
I'm trying to use VB to create a macro that will insert check boxes automatically when data is entered in that row. The problem is that I have VERY little experience with VB code. Here's what I'm looking for:
When I enter data in box A2, I want to automatically put a check box in cells D2, F2, G2. When I enter data in box A3, I want to automatically put a check box in cells D3, F3, G3. (and so on....)
I have already found a macro that will put a check box in a particular cell, I just need to figure out how to do it automatically in the cells I want. Here's what I have to put the check boxes in:
Sub AddCheckBoxes() On Error Resume Next Dim c As Range, myRange As Range
[Code]....
I just want that to happen in the 3 cells in the same row that I enter data in automatically when I enter data.
I had a spreadsheet with an insert row macro which worked fine and dandy, unfortunatly I decided to split the worksheet across two worksheets and the macro requires updating, The macro currently runs fine for the 'To be State' worksheet but gets an error on the 'As is State' worksheet. The code breaks down on this line:
ActiveCell.EntireRow.Insert Shift:=xlDown
The only difference between the two worksheets that I need is that in the 'To be State worksheet' columns C and O need to be copied down from Row 3 while in the 'As is State' worksheet columns C and U need to be coped down from Row 3.
The worksheet names are:
As is State To be State
My Code is:
Sub InsertARow() Dim CurCell As Range Set CurCell = ActiveCell Dim CurCellInA As Range Set CurCellInA = Columns("A").Cells(CurCell.Row)
I need a macro that will insert 11 rows before the word total. The word total will always be merged between col A&B but will not always be in the same row. It might be in row 5 one day and row 25 the next.