is it possible to have some sort of form that stays on top and is showing a total price as the user is working? It would have to move down the screen as the user moves down also. I dont have the workbook started, just needed to know if its possible and if so, of course, how to do it!
View 2 Replies
I need to create a leave tracker wherein i will get the names of the person who want to take leave in that particular month. I have prepared a calendar to make an entry. I need to take care of the following things
1) The person must have sufficient leave balance available to take the leave. so i have to first check if he/she has sufficient leave balance.
2) There are four team leaders and each team has around 13-14 members. so if lots of people from the same team apply for the leave then they will not be eligible for leave. this i want to know in percentage as to how much percentage of people are taking leave from that particular team.
Due to work, I need to creat the captioned file for our company.
View 2 Replies View RelatedWhat I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
I have a spreadsheet with a userform for inputing and deleting vehicles onto a spreadsheet, these are working fine,,,,
Before I try and figure it out, can 1 button be used to open a msg box and the userform at the same time
What I am trying to do is set up a few command buttons on my userform that will allow the user to open a specific folder, browse, and then open the file of their choice.
Is this possible?
I have an excel sheet that has a userform on, when this is open my users are required to cross reference with another excel sheet they have just typed up to make sure they enter the right information into the userform. The only problem i have is, when the userform is open my users cant access any other excel workbooks.
View 2 Replies View RelatedI have a Sub() in a module that sends an email to address that it retrieves from a spreadsheet.
See portion of code below
HTML Code:
Do
vaRecipient = Application.InputBox( _
Prompt:="Please add the name of the recipient such as:" & vbCrLf _
& "excel@microsoft.com or just the Staff ID.", _
Title:="Recepient", Default:=Range("I" & vaRow).Value)
Loop While vaRecipient = ""
[Code] .......
This is basically showing 3 popup boxes one after the other to verify each address,
Is it possible to either have it show an input box with 3 fields or ( what I'm currently trying) is to show a Userform . I have tried Userform12.show but it isnt working.
This is the code I received for showing a userform upon open...but it's not working.
View 10 Replies View Related I have got a Useform. I want on Sheet1 when i click on Userform button to open it ; then excel application should be hide and only userform should be show.
I do not want it on startup.
I have attached Excel worksheet with userform.
Basically I have a user form that opens up another workbook file. and then hide the user form. Now what I owuld like to do is have a button on the worksheet that will recall the userform and close the workbook.
The user form is frmUsreDataSheet It is in VBAProject(UserformExample.xlsm)
The file or workbook that gets opened is VBAProject(FSO Open Report.xlsx)
I searched the web and there seems to be a lot of conflict about whether it can be done. Some suggestion you create a reference in the FBAProject that houses the userform, and then create a code that references or something like that.
Oh and not sure if I should be using an Activex button or a form control button. but the button will exist on the worksheet.
I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
Can you suspend a userform after open an excel file from the userform? I have a userform that allows the opening of excel files (one at a time), but the user has to close the userform to access the excel file. Can I work with the file while the userform is still active?
View 2 Replies View RelatedCan a hyperlink (in a worksheet cell) be used to open/show a userform?
View 9 Replies View RelatedI have created a user form that has 6 input boxs and at the bottom of the userform has a seventh box that has a running total. I have two buttons one to "accept" and one to "cancel". My prloblem is creating the code to make it work correctly.
1) if a cell in B5:B20 become the active cell than the userform is to open up.
2) once the useform is open the user can input up to six different numbers into the input box's which will show the runinng total in the seventh box.
3) Once all numbers are inputed into the input box's the user can hit "accept" to post the total into the active cell or hit "cancel" and nothing have nothing happen.
I have a User Form that I am trying to open with a button click. I made a copy of one workbook with a new name. The Buttons and Macros were all copied as well. I modified the old Userform so that I can release Version 2 of the Userform, and now when I click on the button in Excel, I get the following error : Object doesn't support this property or method. Run-Time error '438'.
The code assigned to that button is as follows:
Sub Button121_Click()
'
' Button121_Click Macro
' Macro recorded 8/11/2002 by Kale Mayfield
'
UserForm1.Show
End Sub
What am I doing wrong? HELP! Once you have the Userform populated with ComboBoxes,Textboxes, etc., is there now way of making changes to that Userform? If you make changes and rearrange the locations of the buttons and boxes and labels... does that mess up the button in Excel that opens the form to begin with?
I have a Userform in Excel.
My requirement, is whenever I open the Excel file, it should open the userform and should not show the excel file at all. And the form is closed, the excel file should be saved and closed.
Also, I need the minimize button on the form and in the taskbar, it should not display the Excel file, it should display only the Userform.
I have created a userform to get cells from the user using the selection property. The userform is supposed to do the following: prompt the user to select the first range. When the OK button is clicked, the selected range is stored to the variable first_range. Then the userform prompts the user to select the second range, and stores the selected range to second_range once the OK button is clicked. My problem is that I am unable to select cells while my userform is open. Is there a userform property allowing one to select cells while a userform is open?
View 8 Replies View RelatedWorksheet1 has data, with a cmdButton that opens a UserForm. When the UserForm opens, some txtFields(in the UserForm) are populated based on the data from Worksheet1. The issue is, if we change the data on the worksheet1, we have to open and close and open the UserForm to have the txtFields populated.
View 7 Replies View RelatedHow can I use a ComboBox Dbl_Click event to open another UserForm ??? The event exists, but how it works ???
View 5 Replies View RelatedI have a workbook with 'Application.Visible = False' in the 'Workbook
open' event, as well as 'Userform1.show'. The relevant Desktop shortcut
is set up for the application to run 'Minimized' and to start in
"C:Program FilesMicrosoft OfficeOFFICE11".
In this manner, when the shortcut is Dbl clicked, the userform appears
with no visible evidence of Excel having been started. The
application.visible attribute is reset in the 'workbook close' event
with :"Application visible = true.
All of this works extremely well, however wilst previously opened
workbooks remain open and visible when I start this workbook, while the
workbook is opened I an unable to start any other excel workbook via
their shortcuts. I can however start a new instance of Excel then
browse to the workbook to open it.
MY QUESTION: How do I allow users to start any of their Excel
workbooks via their shortcuts while my application is running and the
userform showing?
I have a userform with several buttons on, each doing seperate tasks, three of the buttons however are used to load a workbook stored elsewhere in our central data storage drive. Loading these workbooks is not the problem, the problem is when loading these they load up behind the userform and not in a new window.
View 6 Replies View RelatedProblem: I have textbox entries that are part of a Userform that opens using a macro on a speadsheet button. Once this form is open, I can no longer actively work in the spreadsheets.
Need: I need a way to minimize or "put on hold" the Userform so that I can freely move around in the spreadsheet. This could be in the form of a button on the Userform. Then, I need a way to bring back this userform to the point I was at before being put on hold so that I can continue to input entries into the textboxes (again, a buttton that could bring it back). There should be a way to toggle between both worlds.
Develop one system that can search and make changes on the user form. I already find the solution on my first worksheet(USER PROFILE) but when i used the same coding on my second worksheet(INVENTORY&RET), it doesnt work. Here is the example of my INVENTORY&RET worksheet example.xlsm
Hit MAKE CHANGE button to see the problem.
The use of this userform is to find a customer reference number. Im using two combobox's and a textbox.value that are populated from another workbook.
Though the way it is at the moment it opens the workbook and closes the workbook every time a new value is set to one of the combobox's.
I want to open the workbook on the useform initialize and do everthink the useform need from it. And then on the userform terminate close the workbook. Or somehink to this equlivent so this process of finding the customer referance number goes faster.
Hi, I'm trying to use a userform to open a previously saved file to avoid having the users dig through the folder and maybe work on the wrong file.
I have a file I have created to test if the code works, but the macro keeps giving me the reponse I set in case it doesn't find the file.
The data for Account (Account1 and Subaccount1) is coming from a text box, as well as for category (Category1). The data for Company is an optionbutton frame with 4 options for the user to select from.
Is there any way to tell a userform to always open in the center of the excel screen? It always seems to open somewhere in outer space on multiple screen setups.
View 9 Replies View RelatedI would like to set the value of a toggle button when the userform is opened so that it coincides with the what columns are hidden on screen. Below is simple example which I have not tested or debugged. It was just what i was thinking.
VBA code
Sub Macro2()
'if col A is hidden
If Columns("A").EntireColumn.Hidden = True Then
'make hidecalcs toggle button true (sunken)
Userform1.HideCalcs.Value = True
[Code]....
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedWhat am I missing here? I followed http://www.fontstuff.com/vba/vbatut07.htm and I have this code but nothing happens when I click on 'M6'.
Private Sub Calendar1_Click()
ActiveCell.Value = Calendar1.Value
Unload Me
End Sub
Private Sub cmdClose_Click()
Unload Me
End Sub
Private Sub UserForm_Initialize()
If IsDate(ActiveCell.Value) Then
Calendar1.Value = DateValue(ActiveCell.Value)
Else
Calendar1.Value = Date...............
