Worksheet1 has data, with a cmdButton that opens a UserForm. When the UserForm opens, some txtFields(in the UserForm) are populated based on the data from Worksheet1. The issue is, if we change the data on the worksheet1, we have to open and close and open the UserForm to have the txtFields populated.
View 7 Replies
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
Ive got 12 sheets, one for each month, and I've got a combobox in each sheet, and Ive got a macro for each combobox, that makes it jump to the correct sheet number. The problem is that when I try to populate the comboboxes under the workbook_open() sub, it doesnt work.
Tried
Code:
Private Sub workbook_open()
ComboMaaned.List = Array("Januar", "Februar", "Mars", "April", "Mai", "Juni", "Juli", "August", _
"September", "Oktober", "November", "Desember")
End Sub
tried with
Code:
Sheets("Sheet1").select
and
Code:
Sheets("Sheet1").ComboMaaned.list = Array ...
Seems to crash every time.
I need to populate combo boxes from a list of data on a separate workbook. I set everything up then found out the way I did it the seperate workbook must be opened before the drop downs are populated with the information. Is there a way to not have the linked workbook open?
Also these workbooks are all contained in their own file that must be duplicated on to other machines and into other larger files. I need that linked information to always follow the workbook contained in the same file. Another words if I have the original file "A" and duplicate it and now have a file "B" I want the combo box in file B to be linked to the workbook in file B.
See attached for explanation of what I need. I basically need a user form to appear asking for an specific time and services provided and transfer this data into another sheet. In sheet 1 there will be several time codes in pink for each service provided.
View 9 Replies View RelatedI want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View RelatedI have some textboxs and some comboboxs, on a user form I want them to populate according to the row the cell is selected on.
Example:
cell c15 is selected,
UserForm1 Textbox2 populates with value of A15
UserForm1 Textbox1 populates with value of D15
UserForm1 Combobox2 populates with value of F15
And is the user changes a value I need it to update the cell.
Userform1 is a basic search and find using the text the user enters in a text box, followed by 'ok' commandbutton.
If a matching cell is found in the worksheet, the row is selected and the second userform asks for text via textbox2. This text will be placed in the end column of that row (column L) that was found to have the text input in Userform 1.
What's important is that if on that row some text already exists in column L, that this appears in textbox2 allowing the user to modify it.
I'm ok with the search and find :
I am searching a database for a particular date and want the data corresponding to that date to be populated into a userform. So in short I want the data to be displayed in the userform. I am looking for ideas on how to do this efficiently. I currently do it with a list box, but it is only able to display one column of information. I hope this is clear.
When I put order number into "txtOrder" it finds that order and populates the labels in userform. But the problem is, it populates only first row with that order number. How to show all other rows with the same order number in userform labels?
For example : i want to find all rows with that order number and populate them into labels like that:
(Order number -123456) lbl1 = cellA1; lbl2 = cellA4; lbl3 = cellA3; lbl4 = cellA5; lbl5 = cellA10; lbl6 = cellA7
(Order number -123456) lbl7 = cellB1; lbl8 = cellB4; lbl9 = cellB3; lbl10 = cellB5; lbl11 = cellB10; lbl12 = cellB7
(Order number -123456) lbl13 = cellC1; lbl14 = cellC4; lbl15 = cellC3; lbl16 = cellC5; lbl17 = cellC10; lbl18 = cellC7 and so on....
I am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I have a userform that pops up upon opening a file. The user form has
5 text boxes names Zero, Two, Four, Seven and Nine. I would like each of these text boxes to automatically populate with the values last used. The values last used are stored in Worksheet "Index Settings" in Cells "C3:C7".
I would like to populate the captions of checkboxes in a userform with the items listed in a drop down menu located in cell A1. Lets just say I don't know exactly how many items in the dropdown there will be, but I do have an estimate number. Maybe between 20 and 25.
View 9 Replies View RelatedWhat I am trying to achieve is to get the UserForm to populate from information in the Database. In column AD I have a formula which produces a number when an item becomes due. I would then like label1 (lblReg1) to populate data from the same row in column A and label2 (lblDate1) from column S.
I then have a CheckBox (chk1) next to each pair of labels for the user to confirm the task has been actioned and when the CommandButton is clicked I would like the result placed in column AE in the corresponding row.
I have tried utilising code from another userform I have but I cant get it to work and I believe this is to do with the 'ActiveCell' reference as there is no Activecell (you can probably guess I am new to this). Example:
Sub UserForm_Initialize()
If Sheets("Database").Range("AD3:AD5000").Text = 1 Then
lblReg1.Caption = ActiveCell.Offset(0, -29).Text
lblDate1.Caption = ActiveCell.Offset(0, -11).Text
Me.chk1.Visible = True
End If
End Sub
(All the Labels are blank and will be filled hopefully by code, all the CheckBoxes are set to Visable = False at Initialize stage, I will be using Me.Height = ?? to expand the form to visible check boxes)
I have attached a small selection of my workbook where I have set up the userform and named the labels.
Can anyone amend the code to achieve the desired result or alternatively put me straight on the correct way to do this.
I've found a great userform on this site that allows you to populate a datasheet as well as delete or amend datasheets. It was by dodger7 within Database. Very useful. I've adapted this to my needs and it works great apart from i cant amend the userform that shows data when you select delete or amend. I've had a go but don't understand how i can create my own feilds and set it up in order. When i go in to the code i can veiw the delete and create/amend userforms but this is a search function relating to a reference number. Once you select Find it brings up another form and that is the one which i need to adapt to show my new feilds. I have attached the sheet so you can see my problem. I was wondering if anyone can advise as i love this userform/database method but can't complete the changes to my needs.
View 2 Replies View RelatedI've created a userform to populate rows in a worksheet. The userform gets details of flights with inbound and outbound dates. I'd like a calendar to popup so the user can just select a date with the click of the mouse which then resides in the textbox until sent to the sheet. I know how to get the calendar to pop up when entering directly into the sheet but I don't want the user to have to touch the sheet unless making amendments.
View 9 Replies View RelatedI want to create a user form to allow users to put in 26 values and then have the values populate certain cells within the spreadsheet.
I have attached a sample, I know how to create the form, I'm just not sure of the coding I would need to use?
I have this UserForm I need to clean-up but can't figure proper ways of doing it.
There's 2 ways to call the Form:
1) The main Sheet has a Command Button that calls the blank Form, which allows the user to enter & select data to be submitted to the sheet (using combo boxes, etc.).
2) If the user wishes to modify an existing entry on the sheet, he must click on it. This will call the Form which will be populated with the existing data on the sheet (per Row, since the Form enters data one Row at a time).
My problem is that I can't figure a proper way to Initialize my Form to either be blank (as for option #1), ie. have no pre-entered or pre-selected data in it, or to be filled with pre-existing data from the sheet (#2).
I tried to handle this by setting my ActiveCell = A1 when my CommandButton is pressed and check it when Initializing the Form (to initialize for #1 instead of #2), but that's totally not working.
was having a look and cannot find the question to this answer.
1,what i have done is made a workbook with a user form to input data (customer id is the unique record)
i now want to create a form where i can put the customer id in and tell it to show me that customers details and i can edit.
i have various textboxes/ combo boxes/ check boxes in the input form and i want all these to be included on the review form (for updating and changing the existing data).
2, also if possiable i will add a sheet with dates for deadline to cancel, can i get this to show on the new input form is it is to late to cancel?
Some Background info:
This is my first post! I am a total novice when it comes to VBA in Excel (but I'm a fast learner!), so please bear with me if my question is either obvious or easy (or if this is a question that's been asked 14980213 times already). I have some programming experience, but all in C or C++, not in VBA--this makes the project challenging. I also have to hand this off in a few months and trust that it'll never break, ever--more challenging.
I'm trying to make a Participant Tracking System for some workshops we offer. The intent is to make a userform so that an administrator can input all the information for the participant in question. One important question on the form is which course the participant intends to take; the snag is that the current list may change over time.
The Spreadsheet is set up with Course headings starting at R8C8, and continuing across for all 16 courses we currently offer. The data for the participant is entered into Rows 1-7, and the date they completed the course in the appropriate column for that course. There are some formulas in Rows 1-7, the important one here counts up the number of classes currently offered.
So, below is the code i'm trying to use, at least to start. I am making a combobox that has all of the available classes.
Private Sub UserForm_Initialize()
Dim ClassList() As String
'R5C6 contains a formula that calculates the number of classes offered. The value is currently 16
Redim ClassList(R5C6)
iCount = 0
y = 8
Do While iCount > R5C6
'R8C8 is where the class list begins.
'It continues horizontally along the rows for the 16 titles offered.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
y = y + 1
iCount = iCount + 1
Loop
With ClassListBox
.Clear
.List = ClassList
.ListIndex = -1
End With
End Sub
I used to have a line that replaced the following chunk.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
It read
ClassList(iCount) = R8Cy
and did nothing for me at all.
When I initialize the userform, I get a blank combobox. It doesn't do what I want it to do, but that's probably because I'm telling it to do something weird.
I am trying to populate a UserForm with data from a spreadsheet using a search function instead of just providing a Next and Previous search function (which works). The following code is able to search for and select the correct row on which the data resides.
Private Sub cmdBlankFind_Click()
Dim FindMe As Variant, FindCell As Range, FindCell2 As Variant, Data As Variant
With Range("BLANK")
FindMe = InputBox(Prompt:="Please enter search criteria:")
Set FindCell = .Cells.Find(What:=FindMe, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
FindCell.EntireRow.Select
Data = FindCell.Value
tbxBlankAccount.Value = Data(1, 1)
End With
End Sub
I have a userform to be populated with data from a dynamic table for purposes of showing users their daily stats. The data is populated on the worksheet in the following way- ..............
When the userform is pulled up, it needs to show the following details -
UserName - User1
Workitem 2 : 12
Workitem 3 : 7
As the work items go all the way to 65, I wanted to only show the work items that had actually been worked on by each person - What I am struggling with is how to populate the textboxes on the userform with this data - without getting into an absolute mess of if statements -
If Range(WorkItem1Range).Value <> "" Then
userformStats.WorkItemA= Range("a2").Value..........
I need to populate the textBoxes from the selection from ComboBox I've created in a UserForm. I have attached the file that I was working on. I want to be able to keep selecting then populate the text box until I have finsihed.
View 2 Replies View RelatedI am looking to fill out a combobox (say combobox1) in a userform from a set of ranges located in a different workbook (that is in a different location).
For example, the cells that would need to be in the combobox are B5:B41,D5:D40 and F5:F45 and the file location is W:WCWORKCENTERS.xls
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies View RelatedI'm trying to link combo box's on a user form to a hidden workbook. I placed the workbook into
C:Users[User Name]AppDataRoamingMicrosoftExcelXLSTART
Then hide the worksheet which essentially hides the workbook as only 1 sheet is present in workbook. This should make the workbook available every time a user opens Excel
Now when i initialize the form i get an error
Run-time error '1004': Method 'Range' of object'_Global failed
However when i unhide the worksheet the form runs fine. Do i need to declare the combo boxes differently than shown below The range "Tools" does exist on the hidden workbook.
I am working on a label printing set-up for my work. So far I have completed the userform that formulas will be entered on and printed from. I had an idea of being able to save these formulas for recall later. I included “Save” and “Recall” buttons on the userform. My plan is to have my co-workers click on the “save” button and be able to enter an additional piece of data and have everything saved to another worksheet labeled “database”. If you look at the said sheet you will see a column for “customer”, “color” and then the colorants. Due to the wide variety of colorants and quantities available, I set it up so that I have the colorant and under that Oz and 48ths. I am trying to figure out a code that will populate that across the row.
Then I want to be able to push “recall”, find my customer and then color in a combobox and have that populate my label.
At this time I am stuck. Part of my problem is I don’t quite know the terminology to google.
Attached is the file I am working with. The only sheets that need concern anyone are "main" and "database". The others are from the original file and I will be deleting those once I am done.
I need a fix to my macro that does not specify the sheet name. It needs to populate the active sheet. Here is my code.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Sheet1").Activate
' determine the next empty row
[Code]....
I have a userform that I use to enter fault calls and it saves in to a spreadsheet.
I want to develop the capability to be able to have a form that Will search a pre-existing call and then when it finds it to bring up the main userform and populate it with existing details so that the user can amend them if reqd and save back to the database.
So what i want.
Userform - New Call
Userform - search existing call
I want to open 'search existing call' userform, be able to search based on one of the following: callrefnum, fault_type, Call_logged_by
Once the call is found - it should be displayed and then on double click it shd open up in the main userform 'New Call' with all existing details populated.
