i have a large spreadsheet of more than 400.000 address entries. The data is sorted by tables "A=name" "B=city" "C=country"
I need to join cells of Table A whenever B(city) & C(country) match.
Is there a formula which:
Looks up tables for cells with same "country" + same "city" = join all the names of Cell A (names)
Example: ....
I have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedI use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell
Sub COMMENT()
Worksheets("DVD Lijssie").Activate
If ActiveCell.Value 0 Then ' Change all in to ... ... ...
ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "["
With ActiveCell.Font
.Name = "Arial Narrow"
.Size = 8
.ColorIndex = 16
End With
End If
End Sub
HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I am trying to change the value in a cell by referenceing it to another sheet. My cell is: Today it is 33F, have a nice day. Now, 33F should be called from another cell and should be inserted in this new cell. If I change the 33F in the other cell this change should be reflected in my text file.
View 3 Replies View Relatedi have an address that is all in one cell displayed like
101 hampton Court, Hampton heath, Hampton Town, Hamptonshire, HA01 1AS
but i need to have it split in to individual cells so
Cell A1 would be 101 hampton court
B2 Hampton Heath
C2 Hampton Town
D3 Hamptonshire
E5 HA01 1AS
each part of the address is split by a comma, so i have tried to use that as a identifier as to where that part of the address is, but failed on that, i can separate out the first part and the post code with a find and replace but not the middle.
also i need it to work backwards ie
it finds the post code first,
then the county
then the town
as those 3 are always the last 3 parts, but the address could only have 1 line of addres beofre the town or 3, and it would get messed up as all the post codes, county ans town needs to be in their respective columns
I have three cells in A2:C2 which require user to input some data.
What I want to achieve is to combine the data from A2:C2 in D2.
C2 is a field which user will input the date. He might key in 21/08/06 or
21/08/06, 30/08/06
I have tried using below formulas in D2 but without success.
=A2&" " &B2&" "&(C2)
=A3&" " &B3&" "&DAY(C3)&"/"&MONTH(C3)&"/"&YEAR(C3) (doesn't work if there are 2 dates.
I have attached a file which shows 3 scenarios if user input 1 date and 2 dates.
Split From Copy Non Null Cells In Column To Another. I'm trying to copy some of the results. How do you combine two variables with text into one cell. For example i want range("a1") = var1"."var2 so it would display var1.var2 if var1 = var1 and var2=var2
View 5 Replies View RelatedI have a document that has 3 colums.
Complete Name | Surname | First Name
The Complete Name is currently blank. The others just list the users Surname and First name. In the Complete name I need it to have Surname,Firstname - for example
Complete Name | Surname | First Name
Jordan,Michael Jordan Michael
Is there a Formula (Not Macro) that I can use to combine the Surname and First name cells to populate the Complete name cell with the surname,first name???
I am trying to write some VBA to join the values in 2 cells into another cell for a list, however my knowledge at this level is a little lacking. For each row in a list I would like to join the value of the cell of Column A and the value in the cell of Column B and write the output to Column C for that row, as shown in the attached example. Column C in the example shows the expected output.
View 4 Replies View Relatedi know this is easy but i don't have an idea how to do it. I have dates written on column A1:A7 like
29-Mar-09
30-Mar-09
31-Mar-09
1-Apr-09
2-Apr-09
3-Apr-09
4-Apr-09
what I would like to do is how can I combine 29-Mar-09 and 4-Apr-09 into one cell...I would like the output to be placed in cell A8 appear as "29-Mar-09 to 4-Apr-09".
apSheet.Range("A2").Formula = "=D2&E2&F2"
I am trying to do the same kind of formula with a user form where the user is picking the range for the needed columns. I am not sure how to make it work.
Private Sub test()
'declare variables
Dim wb As Workbook
Dim iSheet As Worksheet
Dim apSheet As Worksheet
Dim glSheet As Worksheet
Dim x As Long
Dim apA, apB, apC, apD, apE, apF, apG, apH, apI, apJ
Dim LstAPRow
'set variables
Set wb = ThisWorkbook
Set iSheet = wb.Worksheets("Instructions")
Set apSheet = wb.Worksheets("AP Query")
With apSheet
LstAPRow = Range("A65536").End(xlUp).Row
End With..............................................
I have two cells. In cell A1 there is a text "(fi) = " and in A2 a number, for example 30. (fi) means a symbol for diameter (letter "f", using Symbol font). Is it possible to joint those two cells in third cell using formula "=A1&A2", maintaining original fonts? What i get is "f = 30", not "(fi) = 30".
View 4 Replies View RelatedI am trying to write a macro that will select and copy all cells in a row that do not have a zero value.
The data I am trying to select will be contained in 12 cells in a single row, i.e cells A1:L1 and all zero values will always be on the right hand side of the first non-zero value in this row (going left to right), for example:
Row: A B C D E F G H I J K L
(1) 0 0 0 0 1 1 2 2 2 2 2 2
What I want to do here is to select and copy cells E1 to L1, since they are the cells with non-zero values. This can vary, so here there are 8 cells with non-zero values but the next time there might be only 5 cell or all 12 cells, etc. I have a lot of data to sort like this so doing this manually takes a lot of time.
Once the macro has selected and copied the right cells, I will manually paste the data where I need to put it.
The big problem I am having is knowing how to firstly select the appropiate cells.
i need to copy the values from more than one cell and need to paste all the values in the single cell (if possible values seperated by commas).
View 2 Replies View RelatedI am joining two cells together, date and time.
I1 & J1
12/13/2005 12:35:00 PM
I want it to appear as
12/13/2005 12:35:00 PM
but after joining i get the serial value of:
38699 0.524305555554747
This is not related to macro - it's an excel question regarding wrapped-around text within a cell (i.e.: text brought onto next line by <Alt>+<Enter>)...
SayI have the following in a cell :
Car<Alt>+<Enter>
Truck<Alt>+<Enter>
Van
and say I want to add a figure (in this example 1A) to the first part of the cell and then another to the second line of wrapped text and so on. How can I split the cell (or lookup the first 'wrapped' line) so that I can then perform changes (using formulas with '&' to combine etc or whatever) so that in the end cell have the following:
Car 1A<Alt>+<Enter>
Truck 2C<Alt>+<Enter>
Van 1B
Looking for formula with if then statement that involves a nested formula or concatenation. I need a formula that says: If cell A reads exactly ABCD then concatenate cell A with cell C. Very basic to most of you gurus but I'm fairly new with formulas.
View 3 Replies View RelatedI am attemping to transpose a column of data into a single cell. I have a list of contact information, and one of the columns is for e-mail addresses. There are filters to the right of the data with different categories so the contact information can be filtered according to the different criteria. Ultimately, the people using the spreadsheet want to use those filters to create a list of e-mail addresses to send their distributions to.
The people who are using this don't have Outlook so we can't use an output to add them to the Outlook address book. We would like to make one cell at the bottom of all the data which would include all the e-mail addresses from that column seperated with a semi colon so they can just copy the contents of that cell and paste that into the To: field on their e-mail program. I've tried several different things but I've not been able to find a solution.
I'm usually able to find my answer but I couldn't find anything to match what I need. Anyway... this is either really simple or impossible to do. I have two cells which have times in each. Say A1 has 5:00 PM and A2 has 10:00 PM. I'm just trying to make it so one cell will say:
From 5:00 PM to 10:00 PM... So I tried this ="From " & A1 & " to " & A2
But as I'm sure you already know that yields this result:
From 0.708333333333335 to 0.916666666666668
For Exempel
A1=B
A2=1
A3="="&A1&A2
I have even tried with concernate and indirect in A3 but no difference there...
I want A3 to return =B1 but it only returns it in text but i want it in form of a formula. Is there a formula that returns text directly into a formula or an easy way to do this?
I have been trying to use the concatenate function to join some text strings to a cell on a different sheet - From an input sheet -Sheet 1 named Input, to a Notification Form (Sheet 2). Although the Function Argument display tells me that it will display the result I want it actually displays just the formula. It's a very simple thing
Address 1 10 Downing Street
Address 2 Westminster
Address 3 London
Postcode SW1A 1AA
I want displayed as: 10 Downing Street, Westminster, London, SW1A 1AA in a single merged cell. All I am getting on the Form is =concatenate(Input!c25," ",Input!c26," "Input!c27," "Input!c28). I feel sure that it is a very easy solution but I can't arrive at it!!
I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below
Code:
Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1)
On Error GoTo TabErrorHandler
oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &
[Code].....
After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."
When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"
If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.
Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.
how to combine the content of 2 cells into one cell and have the information separated by a comma.
For example:
CELL 1:
Software 1
CELL 2:
Spreadsheet Software
The desired results is:
CELL 3:
Software 1, Spreadsheet Software
How to determine the correct formula for this requirement?
Assuming I have 2 individual excel files and an index excel file (in reality, there are more than hundreds of file). For index excel, once the user enter part number (eg. 1 or 2), the excel will look for the part number excel file and determine vlookup function.
The only problem I have here is I can not make the index file automatically add the part number shown on most left column into the required formula (replace the part number file section).
I tried use the indirect function but this require each file to be opened, which is not possible for actual use. I am looking for a function that can work in closed worksheet.
Attached files :
index.xlsx
1.xlsx
2.xlsx
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
View 2 Replies View RelatedI am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?