I am wondering if it is possible to create a formula in a cell that will divide whatever number is entered into that cell by a set or fixed number.
ie. I enter the number 9 in the cell and when I press enter, the 9 is instantly divided by 15 and the answer is displayed in the cell where I just typed the 9.
I have a lot of cells containing numbers. Some numbers are small, some are big.
I want to divide all numbers which are greater than 300 by 1000.
IF cell A2 > 300 THEN divide by 1000.
How to do that? Is it possible to convert value in the same cell like using conditional formatting principle?
I having a bit of trouble entering numbers in Excel, every time I try to enter a number it seems to divide it by 100. For example : - 1 entered in to a cell becomes 0.01, 100 becomes 1....etc. I've tried formatting the cells and had no luck, tried Tool>Options but not sure where to look.
View 2 Replies View RelatedI have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
=1/25%
is it that you want a UDF
Function MyFun(a,b)
MyFun = a / b
End Function
Usage:
=MyFun(1, 25%)
Mangesh
"Gonecoastal1" <Gonecoastal1@discussions.microsoft.com> wrote in message
news:B257DADD-0042-4CF8-88DF-1D17AEAFF627@microsoft.com...
I really struggle with the following scenario:
A1=5 B1=4 C1=0 D1=0 E1=5
What I want to do is to divide the sum of those cells with the number of cells with a value > 0 (but all cells must be controlled to check if the value > 0).
In real life it's easy to see that I want to do 14/3 (A1>0, B1>0 and E1>0 equals three cells), but how to write this formula in Excel?
I have an array in my code and I need to divide each elements of the array with a constant.
View 9 Replies View RelatedI basically have lots of lists of 12 cells. how ever some of those lists contain errors (e.g instead of having 12 numbers it will only have 10)
so instead of doing =sum(a1:a12)/12 i want to divide by the amount of numbers in that area in this case 10 so i can get an average.
I am trying to add 2 groups of cells and then divide the number by 60?
I can't get it to divide? It will only total.
=SUM(T807:T832)+SUM(T837:T846)/60
I have a simple formula that adds two numbers and divide the result by another number
K1: SUM(E1,F1) / H1
K2: SUM(E2,F2) / H2
K3: SUM(E3,F3) / H3
K4: SUM(E4,F4) / H4
K5: SUM(E5,F5) / H5
etc, etc
and then I average the results
AVERAGE(K1:K5)
etc, etc
When H1, H2, H3, etc is 0, it generates a #DIV/0! (since you cannot divide by 0)
I want a formula that I everytime a H1, H2, H3, etc is 0, I want to set it to a specific number H1, H2, H3, etc to 15.00
For example:
IF (H1 = 0, 15.00, sum(E1,F1) / H1)
If the number provided (H1) is 0, set it to 15.00, otherwise add the two numbers (E1, F1), and divide this result by the number provided (H1)
But this is where the problem is:
In every single cell that I have NOT yet provided information, it treats the BLANK cells as if it was 0, and has set every single cell to 15.00.
I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
I'm trying to create a formula which will allow me to do the following
1. Enter the number of jobs received
2. Divide it by the staff available without ending up with decimals.
As an example. Say I have 60 jobs to be allocated and there are 13 peeps to distribute them to I'm currently getting 4.62. What I need to do is make sure that the jobs are only issued as whole numbers. E.g 5 peeps gets 4 and 8 get 5. I also need to factor in jobs on hand etc but I have already cracked this.
I have 4 columns labelled 1st Year, Frequency, Spread and cost. then I have columns spanning upto 30 they represent years but can be labelled as 1 to 30. My challenge is that I want a formula/function/macro that depending on what I type in the first 4 columns it will populate the remaining 30 columns with either cost or 0.
Example: if I had £9,000 at a frequency of 10, starting on the 5th year with a spread of 3.
The cost represents the cost of each frequent. so in the example I would get £3,000 on each of the 5th,6th and 7th years then another £3,000 on the 15th,16th,17th years and finally another £3,000 on the 25th, 26th and 27th years.
what I want to be able to do is have one function/formula that I can paste across all of the year cells. I currently have a formula that can copy the cost at different frequencies but I cant figure the spread out.
=IF($K:$K>0,IF(OR($8:$8=$J:$J,MOD($8:$8-$J:$J,$K:$K)=0),$L:$L,0),0)
where K is frequency
8:8 is year
J is cost
what is the best way to approach this?
How could you divide all numbers in a pivot table by a certain number?
View 1 Replies View RelatedFor instance I have a formula such as =sum(A1:A9). But imagine that the range is not always till row 9 but depends on the total number of rows that are in the table. How can I change that 9 so that it takes a number equal to the total rows in the table?
The final formula I want is not that simple one. It is actually
=INDEX($F$1:$F$1047,MATCH(1,INDEX(($G$1:$G$1047=G2)*($L$1:$L$1047<>"47200")*($L$1:$L$1047<>"47700"),0),0)).
I want to change 1047 by the relevant number of rows. Also, I do know how to do it in VBA, but I have a problem with the length of the formula there (not that one, but other bigger than that)
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I have a sheet with data in rows across several columns.
I want to copy the data from each row into a new sheet and save it with another name (which I already have ascript for), but as I have 10 rows , basically all I've done is copy the script 10 times and chaged the row numbers and nae to save as.
What I want is one script that does all I have now, but then loops back to do the next row down and changes the name to save it as as well (which is the person's name listed in the row)
I did a search myself, then went through the 5 pages the "Post" function brought up. I'm sure it's been asked before, I must just not be using the right words
I need to tell every cell in one column to multiply itself by a firm number and a percentage. Ex: Column F will be the result of $77.80 times 75 percent all the way down the column. Column G will be $27.21 times 100 percent all the way down.
I could enter the formula into every cell, but I wondered if there's a way to just tell the whole column, only once, what it needs to do. PS-I work for an insurance company. The employees of a company want a spreadsheet showing exactly who pays exactly what. Ex: Their paystub shows $142.90 coming out of their paycheck. Their employer pays 100% of medical, 75% of dental. The columns would show Total, Employer Medical, Employer Dental, Employee Medical, Employee Dental.
How can I shift the range of cells I want to calculate an average from? For example I want to get the average of cells A1 to A10, so =AVERAGE(A1:A10) And next I want to get the average of cells A11 to A20, so =AVERAGE(A11:A20). But I don't want to manually change the data or delete rows all the time.Is it possible to do something like: =average(A1+10:A10+10)??
View 4 Replies View RelatedI'm struggling with getting my Excel worksheet to fit nicely on the pg for printing to .pdf. I could tinker with column widths manually to work this out for a printed report. But I need to print a couple hundred reports with varying column widths, so I need a vba solution.
The context is that I'm using vba to process two sets of interlinked data on a worksheet. I only want to print one set of data, and keep the second set out of the print view. To do this, I'm keeping the first set of data in columns 1 to 10 and the second set of data in columsn 21 to 30. I set the print range to only include columns 1 to 10.
This works fine for keeping the second set of data off the printed pg. The problem is that there is always a gap between the end of column 10 and the maximum width of the printed pg. Given the formatting of the report, this doesn't look very good.
I know that page setup offers the "fit to" option. This would work if I wanted to fit everything on the worksheet on the pg, but I don't. I just want to fit columns 1 to 10 to the pg. Is there a way to do this, allowing for varying widths in columns 1 to 10? Is there a way to do it via vba?
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedSAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
View 11 Replies View RelatedLooking for a way to search an active cell (that has been found using macro) for numerical data and if there is some present paste this in a different location
If there is no numerical data in this this cell then paste a 0 in a different location
An example of the string contained in the cell
Product 7.5% wheat <- i would want 7.5 (or 7.5%) copied to a different cell
or
Product X <- i would want a 0 copied to the cell the 7.5 would be in from the above
I can find the cell to search in, i just do not know the correct way to extract the information I need.
I have Sheet with 40 employees who each proposes their work schedule, so I have to give each Employee access to the same sheet and want highlight and unlock only those cells that specific employee can use.
Each employee has to login from a drop-down (sourced from Sheet.Employee Master), so their unique Employee Number is in "A13" of Sheet.LOGIN
Can I identify the ROW number and then use that ROW number in a macro to highlight and unlock specific Range of Cells in Sheet.PROPOSED SCHEDULE?
---where "Sheet.LOGIN("A13") = (the value in the cell Col A:"row" of Sheet.PROPOSED SCHEDULE)
I have attached a scaled down version of the Workbook.
Following code is scaled down-- this is for Employee 02 who appears on ROW 16 of the sheet. (macro is same for each employee, just uses a different row)
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies View RelatedCell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
I have numbers in b2 to b5 say
10
22
35
50
I have numbers in c2 to c5 say
1000
1580
3000
45000
I have numbers in cells d1 to kq1 (1 to 300) d1=1, e1=2, f1=3 and so on
What I want to do is:
In D2 through to kq2 it puts the number in to the cell that correspnds to a multiple of the number in b2.
That would put 1000 in cells m2,w2,ag2,aq2, ba2 and so on
In D3 through to kg3 it it puts the number in to the cell that corresponds to a multiple of the number in b3
that would put 1580 in cells y3,au3,bq3,cm3,di3 and so on
I'm trying to grab a number out a cell and use only the number for other formulas.
So in cell A1 I have 2 LK, in cell A2 4 LK, and in cell A3 is 1/2 LK. I want to just pull the 2, 4, and 1/2 out without the LK and put it in the B cells. I'm sure this is easy but I'm thinking slow tonight lol.
A
B
1
2 LK
2
4 LK
3
1/2 LK