VBA Or Macro To Copy Highlighted Cells And Paste Into New Sheet
Jan 28, 2014
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
ExcelSnippet.JPG
View 5 Replies
ADVERTISEMENT
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Nov 5, 2009
I want to copy only the highlighted cells to another worksheet
View 9 Replies
View Related
Oct 23, 2009
I have a spreadsheet worksheet 1 "BOM" and created worksheet 2 "Risk List"
I have multi Rows of highlighed (ColorIndex = 44) and I would like to have a marcro that copys the highlighted rows from worksheet "BOM" to Worksheet "Risk List" starting the entery at row A3 on "Risk List" as row A1-A2 are Header.
View 10 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related
Jul 29, 2014
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
View 3 Replies
View Related
Nov 26, 2009
I need my macro to select the range that I have highlighted in a worksheet.
For every run of the macro the range will be different.
View 4 Replies
View Related
Nov 29, 2011
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
View 3 Replies
View Related
Jun 4, 2009
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
View 14 Replies
View Related
Sep 23, 2008
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
View 9 Replies
View Related
Jul 7, 2009
Copy paste macro that I'm using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.
View 9 Replies
View Related
Jul 7, 2009
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
View 9 Replies
View Related
Jan 26, 2013
I'm currently working on a maintenance task sheet for a couple of generators. I have successfully created button macros to input dates. I would like a macro to copy all the cells that are RED (due to a condition rule) plus their associated fields to the left from worksheet "Schedule" to worksheet "Tasks Due". [URL]
Here's the pre-programming flow, I just don't know the code to do it:
Scan worksheet "Schedule" for red cells in following Range
H8:I16,H18:I22,H24:I35,H37:I41,H43:I49,H51:I59,H61:I72,H74:I75,H77:I84,H86:I89,H91:H100
If cell = red Then Copy Row A:I
Insert Row into sheet ("Tasks Due")
If red cell is in worksheet "Schedule" H8:I16 then insert copied cells in worksheet "Tasks Due" one below cell = Fuel System
If red cell is in worksheet "Schedule" H18:I22 then insert copied cells in worksheet "Tasks Due" one below cell = Lubrication System
[Code] .....
If my uploaded workbook doesn't work I've linked screenshots of my document.
Top of "Schedule" worksheet: [URL] .....
Middle of "Schedule" worksheet: [URL] .....
Bottom of "Schedule" worksheet: [URL] .....
"Tasks Due" worksheet: [URL] .....
View 4 Replies
View Related
Jan 7, 2013
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
View 2 Replies
View Related
Sep 12, 2013
Is there a way of copying an entire sheet, but pasting only the cells that don't contain an equation?
I have a number of populated templates that need to be copied into a master document, both formatted and laid out the same. However, I have some instances where the templates have been fiddled around with so the formulas have been corrupted. So, I'd like to pick up the raw data without the corrupted equations.
View 3 Replies
View Related
Aug 18, 2014
Any way to bypass the unprotect sheet in a shared work book, this is what i came up with so far
[Code] .....
View 4 Replies
View Related
Mar 12, 2014
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
Sample.xlsx‎
View 3 Replies
View Related
Aug 24, 2012
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
View 1 Replies
View Related
Nov 14, 2012
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
View 4 Replies
View Related
Apr 1, 2008
how to unprotect the sheets in order to be able copying datas to to certain cells.
The unprotection works but only when I start the macro the second time. I do not understand why.
After I did the updates I want to reprotect the sheets but that seems not to work in my case.
ActiveSheet.Unprotect Password:="my_password_here"
'unprotect the sheet
ActiveSheet.Protect DrawingObjects:=True, _
Contents:=True, Scenarios:=True, Password:="my_password_here"
' Reprotect the Sheet
View 7 Replies
View Related
Sep 17, 2009
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
View 13 Replies
View Related
Oct 21, 2009
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
View 14 Replies
View Related
May 8, 2014
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
View 9 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Jun 21, 2014
I have data in columns that I want to create charts for. However, this data is dynamic and the number of cells where there is data varies. The rest of the cells that don't have numbers have 0s, however if I applied a macro to the whole column all of the zeros would show up in the resulting charts. How can I create a macro where I can highlight just the cells (the ones with non-zero numbers) that I want a chart to be generated for. Or is there a way to ignore zeros/blanks completely in the macro?
Example: here are two columns with data. I want to make a macro that creates a chart by just highlighting the actual numbers and ignoring the zeros.
Mexico
0.171896
USA
0.132952
Germany
0.113626
Colombia
0.096198
[code]....
View 1 Replies
View Related
Nov 7, 2012
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
View 3 Replies
View Related
Dec 19, 2011
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
View 1 Replies
View Related
May 28, 2013
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
View 9 Replies
View Related
Apr 26, 2013
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
View 2 Replies
View Related
