Stop Macro From Changing Onto Sheet Top Sheet And Flickering

Dec 24, 2008

How can I stop my macro from changing onto sheet top sheet and flickering away like mad??

View 2 Replies


Stop Formula Changing Cell Reference But Change Sheet Number When Dragged?

Feb 8, 2010

need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?

View 4 Replies View Related

How To Stop Screen Flickering

Jan 13, 2010

i have an excel with two sheets containing both formula and vba code... but it will flicker when i click every command button? how will i stop flickering?

View 9 Replies View Related

Stop Sheet Calculation During A Macro.

Aug 20, 2009

Example: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.

My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2

View 4 Replies View Related

Event Macro Changing Sheet Name

May 23, 2009

I have a worksheet called "Roster" with a list of names from D7:D17 each person on the list has a separate sheet that is called by their name. the sheets are not linked up. the names were just manually typed into the list and into each sheet name.

If any name is changed on the list on "Roster!D7:D17" i would like the sheet that has that name to change as well.

This is the code that i was sent, but i do not know enough about VBA code to understand exactly what is happening, thus i cannot diagnose the problem. I placed the following code into the page "Roster" (by right-clicking and then pasting the code) then i closed, but nothing happens. I can mess with the code and get an error message. but that is about it. error messages usually say something about the debugger, or runtime error or something.

there is the
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
OldVal(0) = OldVal(1)
OldVal(1) = Target(1).Value
End Sub

View 9 Replies View Related

Changing Source Material From Sheet To Sheet?

May 12, 2014

I have been working on a workbook that uses as a source information on Sheet 1.

Sheet 1

Each item reports a number of different details from column A to column BY.

Each row is for a different item.

25 rows of information.

Sheet 2

This is my master formula sheet, the one I've been using to create the page that reports and formulates information on a single item. The source for this sheet is taken from the cells in Sheet1!Row2.

Now that I have the sheet pretty much finished, I want to paste the same report on each succeeding page for a total of 25 sheets. I can copy Sheet2 and paste into each successive sheet, but then I need to change every single formula so that where it said AT2 it changes to AT3, where it was H2, H3, etc., from A to BY.

Problem: Can I use something that will automatically take the information for succeeding sheets and take as its source the succeeding row from the source page?

I don't know that I'm describing that sufficiently, so:

Sheet 3 would take as its source Sheet1, row 3.
Sheet 4 would take as its source Sheet1, row 4.
Sheet 5 would take as its source Sheet1, row 5.
Sheet 6 would take as its source Sheet1, row 6.

Etc., etc.

In the past I used the find/replace function, but this sheet seems way too complicated for that. As an example, one cell alone on my master sheet is


so I would need to change S2 to S3 everywhere it appears, but there are probably more than a hundred places on the sheet that I'd have to manually change 2s to 3s, etc., for 25 sheets, which is why I'm wondering if there isn't a better way than going cell by cell, sheet by sheet.

View 1 Replies View Related

Stop Macro From Changing Range In Formula

Jul 6, 2006

If I have a formula that uses cells that are currently blank - and then run a macro that puts data into those cells - the original formula cell ranges change - even if I put $ within the ranges.


Cell A1 has formula = sumproduct(e1:e10>10)
Currently cells E1:E10 are empty

Run the macro

E1:E10 now has data in.

But formula in cell A1 now reads something like =sumproduct(E13:E23>10) or could read =sumproduct(Ref#>10)

View 9 Replies View Related

Sheets Are Flickering Even No Macro Running

Oct 27, 2008

Some of my sheets are flickering even when there is no macro running. It blinks and flashes from time to time. It does not affect the funktion in the sheet except that its annoying as hell. Some times I have to scroll down and back up to "clear" the screen from the flicker/flash effects.

I can open an old file fresh and it flickers and flashes from start. It doesnt matter if I start it with or with out macro activated.

View 9 Replies View Related

Stop Procedure Window Changing When Changing Sheets

Sep 9, 2007

Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?

View 4 Replies View Related

Macro To Copy Current Sheet, Create, & Rename New Sheet From Current Open Sheet

Oct 27, 2008

EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".

View 9 Replies View Related

Code Stop After Sheet 180

May 6, 2008

I have the below code (pieced together and donated by other users on the forum)

Application.Calculation = xlCalculationManual
Application.DisplayAlerts = False
Application.ScreenUpdating = False
Dim Ctr As Long 'set ctr for Invoice
Dim wsData, wsInv As Worksheet
Dim Ibk, Rbk As Workbook

Set Ibk = Workbooks("Invoice.xls") 'Invoice as Ibk
Set wsInv = Workbooks("Invoice.xls").Sheets("Invoice")
Workbooks.Open Filename:="\cmc-dc01usersdcMy DocumentsProjectsRemake GoodyearRentCharge.xls"
Set Rbk = Workbooks("RentCharge.xls")
Set wsData = Workbooks("RentCharge.xls").Sheets("Sheet1")
With wsData........

View 10 Replies View Related

Calculations Stop Halfway Down The Sheet?

May 25, 2012

I have a nice little matrix which looks up loans and tells me the status of various modules within them

It looks something like this:

and it is an Array.

Now, it is working fine until it gets to row 50 then it stops returning values. What's up? There is no difference between the rows except for the loan number change (from D49 to D50...etc). I looked up the loan number in the source document and it's there, so it's not that the source document is missing the information.

View 4 Replies View Related

Odd One, Up And Down Arrows Stop Working When Sheet Protected

Jan 10, 2008

The sheet was working fine, then all of a sudden (i dont know what i have done) the up and down arrows (on my kayboard) wont work when the sheet is protected, when i unprotect the sheet they work fine, i can use left and right. i have checked the scroll lock isnt pressed/illuminated on my keyboard.

View 9 Replies View Related

Undo The Column Hide & Stop On Delete Sheet

Jan 26, 2007

I have a file without password (on file there is sheet protection) & file in shared base with 31 sheets.

User can't do following things :

1. User can't Hide column and can't make a change in column width
2. User Can't delete any sheet from file.

if user do the above thing then undo the event or stop the above event.

This file is on shared mode and i don't want to use sheet protection

View 6 Replies View Related

Macro To Copy Data From Sheet 1 To Multiple Pages On Sheet 2 In Correct Cells

Jan 15, 2009

I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.

I will try to explain the issue here without opening the attachment.

Here is an example of the Data on Sheet1

View 13 Replies View Related

Macro To Copy Sheet From Closed Work Book And Overwrite If Sheet Already Exists

Nov 22, 2009

I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code

View 11 Replies View Related

Excel 2010 :: Macro Runs On Protected Sheet But Changes Protect Sheet Options?

Feb 24, 2011

I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.

My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?

View 4 Replies View Related

Excel 2010 :: How To Assign Macro From One Sheet To Form Button On Different Sheet

Mar 6, 2014

I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.

Sub LoanData()
' LoanData Macro


View 3 Replies View Related

Macro That Will Compare The P'folios In Sheet "Data To Sheet Workings

Feb 28, 2009

i need a macro that will compare the p'folios in sheet "Data to Sheet Workings, and then list the p;folios which is in sheet Data but not in workings in Sheet "New", so in the example below this would be ETSTSA ...

View 9 Replies View Related

Macro To Pull Data From Multiple Sheet To Main Sheet Based On Column Headings

Sep 13, 2012

I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.

View 8 Replies View Related

Hide Standard Buttons & Stop Work Sheet Flashing..

Mar 10, 2009

1: Is their anyway I can get rid of the File, Edit, View, etc buttons at the top of the document so everyone that opens it can not see them? and also the save button, the idea is they have to use the button to save the sheet.

2: I have a button on the sheet with a macro that saves the sheet once it has been worked on, the sheet flashes when this button is clicked is there any way I can stop the sheet flashing ?

View 2 Replies View Related

Make Macro To Bring Tables From Another Sheet To Cover Sheet?

Jul 8, 2014

I am trying to take the tables you will see in the dummy page on the second and third sheet and have them output onto the first sheet based on the parameters of the drop down menus. Is there a way to have a button on the first page that controls a macro to do this?

View 4 Replies View Related

Macro Pull Data From Each Sheet And Create A Summary Sheet

Jan 26, 2009

I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.

The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.

View 9 Replies View Related

Macro Copy Of The Active Sheet And Then Rename The New Copied Sheet

Jul 30, 2009

I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').

"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))

Sub NewMonth()

ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub

View 9 Replies View Related

Create Macro For Exporting 2 Columns From One Many Sheet To New Sheet

Aug 31, 2013

Create a macro to export 2 column to a new sheet.

I have attached the sample file, check for reference.

I want to export Month and Monthly percentage column to a new sheet..

Efficiency Report Fo TS.xlsx

View 5 Replies View Related

Macro To Unprotect Sheet - Paste Then Protect Sheet

Apr 8, 2014

I want a sheet to copy and paste into another worksheet, I have that code and its working fine, but what I also want to do is for the sheet to be protected,so the code would be, copy, unlock, paste, lock, save.

Here is the code I have so far. I know i have to include ActiveSheet.Unprotect "passowrd" ActiveSheet.Protect "password", but I dont know where to include that last part of the code.

View 5 Replies View Related

Macro To Pull Data From 1 Sheet And Filter Into Another Sheet

May 14, 2014

I'm trying to get the data from Receipt log (sheet 1) to automatically populate into the Print Receipt (sheet 2) and to automatically filter and go to the Activity by account (sheet 3). I am so new to this and totally lost.

See attached sample : Student fees.xlsm

View 12 Replies View Related

Macro To Copy Data From One Sheet - Paste In Another Sheet

Jul 29, 2014

How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:

Sheets("Mapping QTR2").Select

[Code] ....

Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...

View 3 Replies View Related

Have Macro Point To Current Sheet Instead Of A Specific Sheet Name

Apr 2, 2009

How do I change this macro to refer to the current sheet name instead of "FullScreen (2)"?

View 4 Replies View Related

Macro To Transfer Data From Sheet 1 To First Available Empty Row On Sheet 2

Jun 25, 2012

I am looking for a Macro which can transfer data from sheet 1 to the first available empty row on sheet 2.

For example, I have data in the following cells on sheet 1: B2, B4, B6, B8, and B10. I want to transfer this data to the first available empty row into cells A1, B1, C1, D1 and E1 of sheet 2. The cell number is ofcourse depending on the first available empty row and could thus be 2, 3, 4, 5 etc.

I also want to delete the data from the original cells in sheet 1 after the data has been transferred.

View 8 Replies View Related

Copyrights 2005-15, All rights reserved