Macro To Paste First Item In Office Clipboard?
Feb 3, 2014
I created a macro that will do a subtotal and copy the value then undo the subtotal and delete all the values(i dont need the actual raw data, just need the subtotal). i noticed when i do a copy, i have to paste from the office clipboard. is there a macro i can use to paste from the first item on the list?
View 1 Replies
ADVERTISEMENT
Feb 19, 2009
I'm doing a data/filter/advanced filter/show all/unique records to get rid of any duplicate rows. I tried creating a macro and but the macro recorder doesn't know that I want to do NOT a regular paste, but a paste from the most recent entry from the Office Clipboard. Is there a formula and/or macro that will allow me to do this?
View 4 Replies
View Related
May 5, 2009
If the user clicks the button to do the paste special macro twice - the second time they get an error (I am assuming that the clipboard has been wiped clean and they need to go back and copy the data again). The specific error message is: "Run-time error '1004': PasteSpecial method of Range class failed".
What I would like to do is add code to the pastespecial macro that looks to see if there is something to paste - if not, I want to give my own message and not the default one.
View 5 Replies
View Related
Aug 3, 2007
a macro that will take my excel sheet (using office 2003) and then pasted it in outlook.
Also I need cell A1 and cell B1 pasted in the subject line.
View 9 Replies
View Related
Mar 3, 2009
I need a snipit of code that will paste the clipboard when the OK button on a message box (vbOkOnly) is pushed. I have in the past was able to make it stop if "Cancel" was selected, but one button seems to be harder for me.
View 2 Replies
View Related
Feb 21, 2012
I am using the following code in a template I have created for my department. I am copying a formula from the 7th row of the specified columns and want to copy and paste the row down to the "last row" which I have specified from an input box. I am trying to do this without using the clipboard, because some files are 50,000 lines or more and I want to speed this process up.
In the code where I have say Sheet4.Range("A8:I140000") I would like to use last row somehow like Sheet4.Range("A8:Lastrow")
View 8 Replies
View Related
Feb 7, 2013
Goal: I have data that was copied to my clipboard from the webpage source in a Chrome browser. I would like to get that data over to my excel worksheet and insert it starting at "A1".
Issue: All of the pasted data is ending up in ONLY cell "A1" when using VBA.
When I just click in cell "A1" and CTRL-V, the data gets spread across a lot of cells, which is what I am after.
Code:
'------------------------------------------
'Start The Process
'------------------------------------------
' Assigning clipboard data to string variable strClip
Dim MyData As DataObject
Dim strClip As String
Set MyData = New DataObject
MyData.GetFromClipboard
[Code] .....
View 4 Replies
View Related
Apr 10, 2007
I got a copy of Office 2007 and I am having some trouble running an Excel macro. It gives a 405 Error message. This macro runs fine on my Office 2003. Is there any extra setting that I need to do in the Excel 2007?
View 9 Replies
View Related
Jun 29, 2006
I'm trying to run a macro on my machine (Windows 2000 and Office 2003) and I keep getting an error on one method. Now I tried to run the same macro on a different machine (Windows XP and Office 2003) and it didn't error out.
Public strControlTitle As String
Public strControlTime As String
Public strControlUnit As String
Public intControlItem As Integer
Public intLastNameOnly As Integer
Public intDataType As Integer
Sub Main()
Dim strControlItem, strPageName, strValue, sigma, z95, z99 As String
Dim r, c, count, cmax, rmax, rt, ct, low, high, a, b As Integer
Dim lesscol As Integer
With ControlChartForm
.ComboBox1.AddItem ("Average Turn Around Time All Patients")....................
View 4 Replies
View Related
Apr 10, 2014
I have a VBA macro for automatically create a word report using data in Access and Excel. The macro is hosted within a Excel document but are using both Word-, Excel and Access objects/dataTtemplates for the creation.
The errors appears what it seems randomly. The macro iterates the same code a few times even in Office 365 but then it crashes. The most common error messages are:
Error 1:
Run-time error '-2147417851 (80010105)':
Automation error : The server threw an exception.
Error 2:
Run-time error '462':
The remote server machine does not exist or is unavailable
Error 3:
This action cannot be completed because the application () is busy. Choose Switch To to activate and correct the problem.
(no options are working, this hang the application)
If I debug usually the error originates from the code where I ether close the workbook template I'm using:
excelWorkbook.Close False
... or when I paste a chart from Excel to the Word report:
wordDocument.ActiveWindow.Selection.PasteSpecial
Even more strange are that sometimes if I continue to run the macro its all working again. This ONLY happens when the client office installation is O365. Office 2013 works just fine. I thought O365 and Office 2013 was fairly equal?
View 1 Replies
View Related
Jul 17, 2014
I'm trying to implement a very simple macro to paste a set of cells - already copied to the clipboard from a CSV file - into a worksheet.
Basically, all I need it to do is to allow the user to open that other CSV file, hit CTRL+A and CTRL+C, then go to the relevant sheet in my workbook and run the macro, which should simply paste the copied data into that sheet (starting at cell A30).
Here's what I have so far - I keep getting an error when the macro reaches the ActiveSheet.Paste command.
VB:
Sub UpdateData()
'
' UpdateData Macro
'
Dim strSheetName As String
[Code]....
View 5 Replies
View Related
Mar 8, 2005
I am using the close.workbook command in VBA to close a workbook I opened to copy data from. I am getting a message that says "You have a large amount of data on the clipboard. Do you want it available?" What command do I use in VBA say no to this message?
View 5 Replies
View Related
Sep 17, 2013
I'm working from a sales ledger file whereby I want all invoice data in one row although the Item Number & Item Description are on the first row. Rows 2-10 (for example) are the actual details of the invoice: Invoice #; Date; Customer ID; Customer Name; QTY; etc.
Is there a formula or easier way than copying/pasting the "Item Description" to the first column (J in this case) without any related invoice data?
View 2 Replies
View Related
Feb 16, 2013
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
View 8 Replies
View Related
Sep 24, 2007
I have a workbook with a Cost Analysis sheet, a master menu sheet, and then all the sub sheets. I have coded command buttons on the master sheet, so once a category is selected, it goes to the appropriate sub sheet. On the subsheet is a list of items of varying sizes, and command buttons beside that which will allow the user to "Select" that particular size. Once the size is selected, the verbage in cell B5 plus the verbage (size) beside the selected amount, and the prices (labor and materials) in the next two columns, need to be transferred to the first available blank line, starting with line C5, to the Cost Analysis sheet. I have never done coding before for a Loop (i.e. For i = ???) and am not sure how to get it to do what I want. After they select that, they can pick a command button that takes them back to the master menu so they can continue picking various items until they are through. Then the Cost Analysis sheet will show all the items they picked, (name of item, material cost and labor cost: Columns B, C, & D). Not everything is coded yet (such as selecting a command button to go back to the main menu, because I wanted to make sure I could solve this problem before doing the easy stuff).
I read over quite a few of the previous threads and am not sure how to change them to suit my circumstance. I know some code (VB), but not much. I do not understand the concept of DIM, and how the loop works to make it happen myself, and all the websites I could find were not suited to my situation of copying three cells of data to the first blank cell on another sheet.
View 9 Replies
View Related
Feb 18, 2008
I need a macro to add the last 2 items in column G, if they are both positive or negative. If one of the values is either positive or negative, then they must be subtracted.
In the example below the formula in G45 = G43+G44
The data is imported so the range will allways change foe rg G45 must become G75, then the formula will be G73+G74 if they are either both postive or negative or if either one is positive and the other is negative then G73-G74 ....
View 9 Replies
View Related
Feb 5, 2014
I've created a dropdown list using "Data Validation" containing 5 items.
Each item in dropdown should run a macro when selected.
Should i use worksheet selection change event? or anything else.
View 2 Replies
View Related
Apr 30, 2014
I have 1 macro that i would like to be activated as soon as i select any item from a form control listbox (doesn't matter which item). i am not using an active X control but rather a form control.
View 5 Replies
View Related
Sep 24, 2009
From a macro, I am trying to activate the Excel dialgue that occurs when you click on a toolbar item.
Specifically I want the Find item (CTRL-F) to activate. I can use the .find method ok from a macro but I want the dialogue from Excel itself.
View 2 Replies
View Related
Jan 12, 2010
How do I select the first item in a listbox via code (userform).
Scenerio:
A user starts with listbox3 and makes a selection for a font type. If the font selected doesnt exist on there system (code already taken care of, true or false) I want to automatically set the font to the first item in listbox3 as a default value transparently so the user can continue.
View 2 Replies
View Related
Jan 2, 2012
know a macro code to add 3 columns after each different Item.on my spread sheet.
1ABCD
2Item
3111
4111
5111
6111
7111
8111
9112
10112
11112
[code]...
View 5 Replies
View Related
Apr 5, 2007
I am wondering if there is any code to SELECT (DESELECT) A MENU ITEM using VBA? I have an Excel Add-in program installed, which adds a Menu "Easycal" to my Excel menu bar. Under "Easycal" (drop down list), I have the following items:
Refresh workbook
Refresh worksheet
Turnoff Easycal
I am using "Easycal"'s functions in various cells of my sheet "Final". When I select "Refresh worksheet" from "Final", "Easycal" fetches (or calculates) me the data from the "Easycal" database. I have a macro (on "Final") that pulls together data from other sheets of the same workbook. I there anyway to include a code in my existing macro, so that when I run the macro, the following are completed in sequence:
1. Select "Turnoff Easycal" menu item
2. Run my existing macro (to pull the data from other sheets to "Final")
3. DeSelect "Turnoff Easycal" menu item
4. Select "Refresh worksheet" menu item
View 3 Replies
View Related
May 20, 2014
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
View 2 Replies
View Related
Jun 14, 2014
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies
View Related
May 30, 2014
I created a drop down list (of various Input Groups) and I need to show the selected group's responsibilities on a separate sheet; is there an easy way to do this?
View 2 Replies
View Related
Feb 6, 2014
I manage an monthly inventory spreadsheet with over 100 various items in the master list. However in any single month there may be only 5 or 10 active items that need to be reported on. How do I develop a macro that will check the "items on hand" column and delete the entire row if the quantity is "0". My report is limited to showing only items on hand and not the entire list of items.
View 1 Replies
View Related
Jan 26, 2009
You can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red).
On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
View 14 Replies
View Related
Aug 21, 2007
I have a normal data validation box on excel, but I want to be able to navigate my way through it using a macro. I can select & opent the drop down list with the following
SendKeys "%{DOWN}"
but then an action like
SendKeys "{UP}"
Does not navigate itself up the menu as a normal keystoke would. Any ideas on how to solve this? Basically, I want to select a cell, open the drop down menu, select the first choice in it (so thinking SendKeys "{HOME}{ENTER}" ) all using a macro.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related