I have the following code that copies only the visible cells in an auto filter...how could I modify this code to paste only the values and not the format?
.Range("a:a").AutoFilter Field:=1, Criteria1:="True"
.Range("b:d,g:r").SpecialCells(xlCellTypeVisible).Copy Destination:=Sheets("Monthly Hours").Range("A1")
i have a work book of 12 sheets, the two main sheets 1+2 have 5000+ rows. by 30 columns. each row column b is a site number in ascending order(up to 4 for each site) so auto filter select = to site 5 about 10 seconds later i get the result of 3 sites try site 846 30 odd seconds later up pops the result. so i copied the sheet to a new work book and tried and it's nigh on instantaneous. next step
copied sheet paste special values into new sheet in same original workbook
and tried filter on that still slow as ever, thing is this book around 8meg and i cant for the life of me work out why ive cleared excessive formats and reset last cell on each sheet. there is a vlookup from sheet 1 to 2 for each site to return serial numbers. i have tried it in vba by turning autocal off/on but still no difference.
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10
Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1
2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults")
3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2
4. Repeat Step 2
.
.
.
Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
Attached workbook : autofiltercriteria3.xlsx
I'm running Excel 2003 and I have a workbook with an Auto List in Column G. When I attempt to paste a row of data I get the following message.
The operation is not allowed. the operation is attempting to shift cells in a list on your worksheet.
To work around this, I have to convert the list to a range, copy the data and then reapply the Auto List.
Is there another way to work around this or will I have to create vba code or record a macro?
I am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.
Here is the part of my code:
[Code] .....
I have an autofilter setup with 3 values: "Show", "Hide" and "Always". The show/hide values are dependent if formulas based on other cells.
I have two sheets with this filter (Template and Summary); the filter works fine on the Template tab, however on the Summary tab...
When filtered to only show values "Always" and "Show", the filter only recognizes some of the "Show" values. I have copy pasted the if formula from the rows that work to the rows that don't and verified the formatting is the same. There are no named ranges that may be screwing it up and no empty cells in the filter range.
If I manually unhide the rows in questions, then run the filter, the rows stay shown. However, if I run the filter to only show "Always", then run it again to show "Always" or "Show", then the rows in question disappear.
I also have vba assigned objects for show and hide (the same scripts are used for the Template sheet and the Summary sheet), but the issue persists when using the buttons.
I hard code "Show" instead of it being an if formula, the filter works fine. But the formula that doesn't work is also used on rows that do work.
I am trying to create a macro to automatically copy and paste values from column M into column N.
Column M is a Concatenated formula, and I want people to be able to copy the result easily without having to do any copy+"paste values" themselves.
So I have the following:
Sub CopyFormulaResults()
Application.OnTime Now() + TimeValue("00:00:01"), "CopyFormulaResults"
Range("M3:M1000").Select
[Code]....
However, the macro only runs when I run the macro, not automatically every second like I want it too.
I am in the process of making a database more efficient and am running into a problem with sorting data. I currently am trying to use AutoFilter to sort the data. When I want to then narrow the results further using the same column as the critical and there is nothing that matches the critical, I get everything from the entire database that matches that critical rather than what I want to see, which, in this case, would be nothing.
I have attached a sample file. In it, when All AF 1000 is run and then Selected MAC 2000 Wash is run, I want to see no results instead of seeing all MAC 2000 Washes from the original data set. I can do it using IF/THEN but I am looking for a faster way to do it.
I have a very large spreadsheet (almost 9000 rows). I have filters on all columns, however when I click to see all the results for the column under the filter, just to view the contents of the row, some are not there. Does a filter have a limitted amount of rows it can hold.
View 2 Replies View Related I have spreadsheet that tracks flights between cities. The spreadsheet has become quite large, so I need a few simple tools or tricks to search it efficiently.
To keep things simple: the spreadsheet has "Departs" and "Arrives" columns, tracking the cities on either end of a flight. (See below)
FlightDepartsTimeArrivesTime
1001New York2:00Boston3:00
1002New York2:30Philadelphia3:15
1003Boston2:45Philadelphia4:00
1004Washington DC3:00New York4:00
1005Philadelphia3:30Boston5:00
1006Boston4:00Washington DC5:30
If my boss says, "give me a list of all flights going through New York," I have to manually filter for "New York" in the "Departs" column, copy that to another spreadsheet, then filter again for "New York" in the "Arrives" column, and manually glue the results together. In my little toy example, that's not a big deal, but when there are up to a couple hundred flights (and just as many cities), this gets tedious and error-prone.
Is there some handy way of filtering for "New York" in both the "Departs" and "Arrives" columns? Or some other way of achieving the same thing? ("Find All" isn't useful unless I can export the full rows into a spreadsheet.)
I have a UserForm with a TextBox and a ListBox
I'd like when I type a last name (for example) and press a button, it filter the results and these results should appear in the Listbox
I have a code that does the same but with numbers (ID, Tlfno number, or other)
I have a basic spreadsheet with a column of names of people (Matt, John, Mike), and specific sales numbers for each. I would like to have a cell give an average of the sales numbers based on how I filter for either Matt, John, or Mike individually.
For example: If I filter to see only Matt, I would like to see the average for Matt only, and when I filter to another name such as John, I would like to see the average number change to see only John's.
I have a workbook with multiple sheets , final sheet has a data of all sheets , in the first sheet i want to select what results to be shown in that final sheet ,, specially the week and the LDM
View 12 Replies View RelatedI want to filter my results using a combo box on my spreadsheet. I don't mind how this is done, even if it just hides all of the information which isn't relevant. I've done it with a VLookup but I want to be able to edit it easily without the formula popping up. So if you click Barlcays, only barclays appears. I'd also like a button to reset if possible. I've attached an example of how I sort of want it to work.
View 3 Replies View Relatedhow to return data to a second sheet if data selected via a filter.
i have attached spreadsheet i am working on and looking to make this as easy as possible
on sheet "data" cell f2 im looking to return all goals scored by hull
on sheet "data" cell f3 im looking to return all goals conceded by hull
on sheet "data" cell f5 im looking to return all goals scored by hull at home this i will need to do by selecting hull in "home team" filter hull
on sheet "data" cell f6 im looking to return all goals conceded by hull at home this i will need to do by selecting hull in "home team" filter hull
on sheet "data" cell f8 im looking to return hulls last 6 games as over and under which in this example will return the last 6 rows 27-32 and will read 4 under 2 over
on sheet "data" cell f9 im looking to return hulls last 6 games at home as over and under which in this example will return the last 6 rows 22/23/26/27/29/32 and will read 3 under 3 over
I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....
"123"
I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".
Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.
how to make a formula to only display the results shown when using the filter..........
View 2 Replies View RelatedA friend of mine asked if there is a formula that will add the "Y"'s and "N"'s based off of a filter per certain dates. Below is a brief example.
2/18/2009Y
8/15/2006N
2/18/2009Y
8/15/2006N
4/6/2005 N
4/6/2005 N
We want to be able to sort by dates so regardless of which date we pick, below the Y's and N's will be the total for the Y's and N's that are visible. If sorted by April, it will show 2 N's and 0 Y's, and so on. Is there any formula out there that can do this.
I'm trying to get certain data from an export of a phone logging report for a call center. I have exported this data into an excel spreadsheet. I would now like to retrieve the following information from the sheet.
'Agent name, Date, time of Login, time of Logout (at end of day).'
I have coloured these fields in red for easy finding. I do not require anything else from this data, however, within this sheet there are multiple agent names and can span for over a month. All names and dates are required. I have attached the current sheet, and also what it will possibly look like once complete. I would prefer the whole process to be automated if possible.
I created a user form that provides a menu that allows users to perform advanced filtering. They can also scroll through the results freely. A problem is that a subsequent advanced filter selection does not always display the top row of filtered records, depending upon what the user has chosen to display prior to selecting the next set of filtered records.
How can I make the top row of filtered records always be displayed so that users will not overlook results of advanced filter operations?
Data: four variables A,B,C and D from A2:D6000
I want a count of unique D values
when A=xxx
and B=yyy
and C=zzz
I have named the A,B,C,D ranges as RangeA, RangeB, RangeC, RangeD
I have used the function
=SUM((RangeA="xxx")*
(RangeB="yyy")*
(RangeC="zzz")*
But what do I use to count-unique values of variable D ?
=SUM(IF(FREQUENCY(RangeD,RangeD)>0,1)) doesn't work.
=SUM(1/COUNTIF(RangeD,RangeD&"")) doesn't work either
They don't work because D can occur during different combinations of A,B and C. In other words, the D value of 'Smith' can, and does, occur when A is 1,2 or 3 and additionally when B is Pass, Fail, Withdrawn.
They "don't work" because I can use filters on A, B, C and D to see what the correct answer should be .. and the function doesn't return the correct answer.
I hope I've explained this ok - I've been searching on several excel-help websites for 2 days now and one of the days my client is going to want some results.
I am trying to create an advanced filter that filters my results into a row.
e.g.
Shane
Shane
Tom
Tom
Paul
Mike
would return
Shane Tom Paul Mike
I have tried changing this piece of code
Range("M1:M300").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Columns("M:M"), CopyToRange:=Rows("25:25"), Unique:=True
The problem is with
CopyToRange:=Rows("25:25")
I have tried using Range instead of Rows but I am not having any joy.
Is it possible to filter results based on conditional formatting?
View 6 Replies View Relatednow i have filtered data in a table, i want to use the results by printing off a table showing just these and the appropriate rows from other tables on worksheets. these all have a specific ID which is how they are traceable to each other. like a related field in an access database. two tables/worksheets are like so:
table1:
Reg No | Rank | Name | Initials | Troop | etc
table 2:
Reg No | JCLM1 | JCLM2 | SCLM1 | SCLM2 | etc
If i were to filter the second table by JCLM1 = YES then i want to create a printable list of all those but also to include the related records from table 1. is this possible?
I recorded a macro to perform an Advanced Filter. I then adapted the range to & LastRow. My question is, can this now be adapted to remove the Select so the sheets are not selected when this is run.
Sheets("CIT Results").Select
Sheets("Open Calls").Range("A1:I" & LastRow).AdvancedFilter Action:=xlFilterCopy, _
CriteriaRange:=Sheets("Open Calls").Range("N5:V8"), CopyToRange:=Range("Q50"), Unique:=False
Moderators, can you please edit the Thread title. It should be "Advance Filter From and To Non Active Sheet"
I have a list of data entries. I use auto-filter, to view them according to which category they belongs to. However, when I wanted to sum just the quantity associated with the criteria which I am filtering, I couldnt find a formula which does that
View 2 Replies View RelatedI have designed a Macro to use an Advanced Filter to search for specific criteria in different columns. I would like the results to bold or highlight the cell if it meets the criteria for the advanced filter. There are multiple numbers in each row that are associated with each record, and I would like to be able to see which of these triggered the filter to work for that row by bolding or highlighting the individual cell.
View 8 Replies View RelatedI have a file with a bunch of columns in it. Columns C and D have names in them. I want to filter on these two columns where the results show all rows where the selected name is in both.
Example, If I filter on Column C first on 2 specific names (Joe and Chris), it will not show the results in column D if that name was aligned with a different name in column C (Mark and Steve). I need all rows to come back.
Column C
Column D
Joe
Joe
Chris
Chris
Joe
Chris
Joe
Mark
Joe
Steve
Chris
In an excel sheet, I am using a macro to filter. Macro code is as follows. When I run this macro, it returns 4 rows matching the criteria from 560 rows in the excel sheet.
VB:
ActiveSheet.Range("$A$1:$I$566").AutoFilter Field:=1, Criteria1:= _
">=11/11/2012 22:13", Operator:=xlAnd, Criteria2:="<=11/12/2012 6:47"
I want to use the same criteria in the vb.net code, to do same thru vb.net. But, when I run the same code in vb.net, it just returns only 1 row (1st row only).
VB:
[FONT=Consolas][SIZE=2][COLOR=#0000ff]xlsRange1.AutoFilter(Field:=1, Criteria1:=">=11/11/2012 22:13", Operator:=Excel.XlAutoFilterOperator.xlAnd, Criteria1:="<=11/12/2012 6:47")
This returns 1 instead of 4 expected.
I need to filter a large database using multiple OR criterias.
Database is CUSTOMER NAMES in each row with CONSUMED PRODUCTS following in each cell.
I want to filter two or more products and list customer names in sheet2. Like listing customers using salt or pepper Filter criterias will be entered into cells in sheet2 with results shown below and I want search to be active and alive just like vlookup function.
Sheet1
CUSTOMER NAMES---CONSUMED PRODUCT---CONSUMED PRODUCT---CONSUMED PRODUCT
GEORGE--------------SUGAR-----------------SALT
MICHAEL-------------PEPPER-----------------CHILI
JACK-----------------BREAD------------------SALT-----------------COFFEE
