Column A Column B
1 b
1 1
1 2
3 4
I need a macro that if value in column b matches with value in column a, delete it both the value in column b and a and put the deleted value into column c. now my value in my columns is a combination of numbers and letters and it can have this characteristic too: `2076 or `FI7890
I've got two workbooks, Workbook1 with a list in column a and Workbook2 with a list in column F. I want to compare the cells in these columns and delete the entire row in Workbook2 if there is a match.
View 3 Replies View RelatedI am using this code below to delete individual matching values (the value in "A2") from a column.
Code:
Set Found = Columns("AH").Find(what:=Range("A2").Value, lookat:=xlWhole)
If Not Found Is Nothing Then Found.Delete Shift:=xlShiftUp
I am receiving error "Delete Method of Range Class Failed" in the highlighted line.
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
I want a macro to compare each value on workbook 1, Sheet "Destroyed", column "C" against each value on workbook 2, Sheet "ERT Master", column "B". For each instance where the value on workbook 1, matches a value on workbook 2, the row where the match is found on workbook 2 needs to be highlighted in yellow from columns A to H. This needs to be repeated for each value in column "C" of workbook 1.
I am recording and editing steps in order to procure unique ID's from a dataset and eliminate the manual intervention for this process. Macro works seamlessly in most of the scenarios except for the one mentioned below where it performs a step which is not really required.
Let me explain the scenario in detail:
-Sheet 1 contains the list of trades as per client's system and Sheet 2 contains the trades as per internal system
-Need to do several permutation and combination in Sheet1 in order to extract the unique ID's from Sheet 2
-Scenario 1 - lets assume I have 100 records I concatenate few common fields in both sheets and use the simple code mentioned below to fill the all rows with the lookup formula
Range(Selection, Selection.End(xlDown)).Select
Selection.FillDown
First scenario itself might populate the unique id's for all the 100 trades or might give partial result which will prompt for the next scenario. If the first scenario generates the Unique ID's for 99 records I can filter on "#N/A" and update a different formula to fetch the unique id using different combination. However in the initial stage I wouldn't know the # of unmatched records because of which I have the standard selection till end and fill down codes in the macro, which would end up filling all the blank cells till the end, which takes unnecessary time.
simple validation code which ensures that if the # of unmatched record is more than 1 only then the selection till end and fill down codes comes into picture otherwise simply update the formula and populate the result.
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1
data
data
data
data
p2
data
data
data
data
[Code] .....
needs to become:
p1
data
data
data
data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
I am looking for some VBA code that will look through a column and delete all but the last duplicate value. The rows are not to be deleted. The duplicate also may not be consecutive (i.e they may appear in rows 2, 3 and 72 - the one in 72 would need keeping).
I did find the following macro which seemed to do the job until I realised it wasn't working if the values weren't consecutive.
Code:
Sub Dupe_Killer_Keep_Last()
Dim lrow As Long
Application.Calculation = xlCalculateManual
[Code]....
Macro to delete a row if it contains a particular value in a column. Say for example I have the following:
a b c d
1 x
2 x
3
4 x
I want to be able to put into my macro code that says delete all rows that contain an X in column B. So this would leave just Row 3 remaining.
I could also sort this data so that I get:
a b c d
1 x
2 x
3 x
4
That way I just have to delete all the rows less than and equal to 3. Ultimately I'm trying to get a way for the macro to copy the rows that DONT have a value in a particular column. But I figured it might be easier to find a macro which would delete.
I need some assistance with a simple macro. Im clueless when it comes to macros.
Heres what I have:
column "e" contains the year built for homes. Some of the fields contain "9999" or "0000" or blank. I need to delete these entire rows. If the year is between 1900 and 2020 I would consider it valid and keep the row.
So I need a macro that says something like this:
if column "e" is not between 1900 and 2020 delete the entire row.
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedEach day I am going to have a list of about 300 different ID numbers, which i have already got a macro for creating, that outputs them into a single column on a sheet.
The next challenge Ill face now, is that I'll have a list of maybe 500 ID numbers in another spreadsheet.... I need a way to basically tell excel to keep rows that contain the numbers in 1 column on the list of 500, that correspond with those on the list of 300.
Numbers that are not found on the list of 300 ID numbers, must be deleted, along with the entire row.
I essentially need a macro that runs something like this that i found online, but instead of it just looking for the word "apple" as rows to delete, i would need it to check to see if the number is one of the 300 on my list.... and delete the row if it is not on the list
PHP Code:
Sub Delete_Rows()Dim rng As Range, cell As Range, del As RangeSet rng = Intersect(Range("A1:C20"),
ActiveSheet.UsedRange)For Each cell In rngIf (cell.Value) = "Apple" _ThenIf del Is Nothing ThenSet del = cell
Else: Set del = Union(del, cell)End IfEnd IfNext cellOn Error Resume Nextdel.EntireRow.DeleteEnd Sub
How to create a macro to search a value and delete the row but I'm having trouble trying to get this to search multiple values. Keep in mind I'm really new at attempting to create a macro so this may look terrible ;-)
I have a list of 20 numbers (changes from time to time) and I need to filter any row containing any one of these numbers out of my results each day. I am currently able to filter a single group of numbers but get an end error every time I attempt to string a group of numbers.
This is what I have so far and is an example. We'll use three numbers as an example.
"12345","12346","12347" are the numbers that we'll use for the example that I need to filter. The code that I have is:
Looking for a macro to find and delete all duplicates and keep only unique values from a column. For example column AS has
ACLU0403598
ACLU0403598
ACLU0403598
ACLU0406600
ACLU5165518
ACLU0406581
ACLU0406581
All red items need to be removed and keep only green items. Would also like the entire row the duplicates are in to be deleted.
Situation: I would like to compare the information between two worksheets and delete the rows that contain the same data in multiple columns, on a row by row comparison.
IE: I have two worksheets, each have identical row headers, with 5 columns each.
Company Load Date Load Time Load Description Amount ?Report?
Store#44 5/14/2009 11:55:41 AM MMBAYO $40.00 WS1
Store#44 5/14/2009 02:34:21 AM SLATOUR $20.00 WS1
Store#45 5/14/2009 01:55:41 AM GCHANDLER $100.00 WS1
Store#46 5/14/2009 11:55:41 AM MMBAYO $40.00 WS1
If column A(Company), B(Load Date), and E(Amount) for record 35 in worksheet one, match the same columns for a record in worksheet two, both records are deleted/highlighted/marked with an x in an additional column/anything.
Alternately, I can combine the data in both worksheets into one large worksheet, if that would make the solution easier. And or adding a column that idenifies which record came from which report.
Basically I have two similar reports; each contain a few rows of transactions that the other does not, I need to separate the matching transactions from the unique transactions, in order to balance the two.
I have tried using the Remove Duplicates function but it saves one of the matching records (they should add an opiton to delete matching records aswell keeping only truly unique records), I dont understand how to work Conditional Formatting to get it to do what I want, I dont know macros, or vlookups.
I have four columns of info. Two are check #s and amounts from the bank and two are check #s and amounts from a database. How can I delete check #s(along with their amounts) that match? Is there any way to detect check numbers that match but amounts that don't?
View 5 Replies View RelatedI have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
I have been using the code found here
Sub DeleteRowsFastest()
Dim rTable As Range
Dim lCol As Long
Dim vCriteria
On Error Resume Next
'Determine the table range
With Selection
If .Cells.Count > 1 Then
Set rTable = Selection
Else.............................
to delete rows that match the given criteria. I am now wanting to do the opposite, keep the rows matching my given criteria and delete all others.
I am an inventory specialist for a dish network company and as such I track inventory in and out of technicians vans, both serialized and not. I've done a great deal of work updating a broken excel sheet they use so that it functions again but I didn't build it. I've learned a lot but I'm only self taught with Excel and had never even heard of VBA code until I dived into this project. It's a huge puzzle and is now my "baby".
Anyway, basically I have one sheet that has a list of all the items I need to keep track of. One section of this Sheet1 I've designed to have cells with dependent drop down lists that are Named Ranges on Sheet2. The tech can choose item A B or C in the first dropdown box and then the next cell shows only the serial numbers from the named range on Sheet2 of A B or C. (Was that english?)
Since the receiver comes out of the techs van once its used I want to figure out a way to delete the serial number that the tech has chosen without deleting the row or cell, just the value in it so that it can then have another serial number typed in. How can I do that?
Also, since I'm here, my 2nd drop down list seems to always start scrolled down and I have to scroll up to see my serial numbers. Why is that? The receiver list starts at the top but the dependent one doesn't...
Here is what Im trying to do: I have a VERY large excel file that has groups of 4 cells, a blank, then another 4, repeating. Kinda like the following:
ExampleCell1
ExampleCell2
ExampleCell3
UID = example
ExampleCell1
ExampleCell2
ExampleCell3
ExampleCell1
ExampleCell2
ExampleCell3
UID = example
That pattern continues for about 3000 lines. However, if you noticed, some of the "groups" dont have the 4th line "UID = example".
Here is what Im trying to do. I want excel to search for the cells with "UID" and DELETE it plus the 3 rows above. So that only the "groups" without the UID remain.
Now Im thinking this may be impossible, but I've seen some crazy things done with excel macros and was really hoping someone can help me out. Otherwise Im doing this manually for 3000+ lines of text.
I'm looking for code to find a copy of the text in cell AH3 in a range AH7:AH100 then delete all copies of the text in that range AH7:AH100 leaving other cells in that range which contain different text intact.
View 3 Replies View RelatedI am an inventory specialist for a dish network company and as such I track inventory in and out of technicians vans, both serialized and not. I've done a great deal of work updating a broken excel sheet they use so that it functions again but I didn't build it. I've learned a lot but I'm only self taught with Excel and had never even heard of VBA code until I dived into this project.
Anyway, basically I have one sheet that has a list of all the items I need to keep track of. One section of this Sheet1 I've designed to have cells with dependent drop down lists that are Named Ranges on Sheet2. The tech can choose item A B or C in the first dropdown box and then the next cell shows only the serial numbers from the named range on Sheet2 of A B or C. (Was that english?)
Since the receiver comes out of the techs van once its used I want to figure out a way to delete the serial number that the tech has chosen without deleting the row or cell, just the value in it so that it can then have another serial number typed in. How can I do that?
Also, since I'm here, my 2nd drop down list seems to always start scrolled down and I have to scroll up to see my serial numbers. Why is that? The receiver list starts at the top but the dependent one doesn't...
I have a worksheet with 20,000 plus rows, header=yes, and I need to delete all rows NOT containing the numbers 6600, 6700 or 6800 in column C. I'm currently using the below code which works, but is DOG slow.
Sub TestDeleteRows()
Dim Firstrow As Long
Dim LastRow As Long
Dim Lrow As Long
Dim CalcMode As Long
Dim ViewMode As Long
With Application
CalcMode = .Calculation
.Calculation = xlCalculationManual
. ScreenUpdating = False
End With
in VBA, I would like to do the following:
Delete the entire row where any cell in that row is equal to cell "b15" in worksheet "Metal Type".
I would like it to run across all the worksheets hidden or unhidden, in the workbook, (except for worksheet "Metal Type").
If possible I would also like it to prompt the user to accept the contents of cell "b15" in worksheet "Metal Type" or enter a new string.
Also can it alert the user when "no matches were found"
I have a need to call a sheet from another sheet, copy two pages from the newly opened, existing sheet to a new workbook, search one sheet of the new workbook for any entries that don't contain a variable I specify, which is the first four digits of the field, and delete them. The sheets represent a daily view of jobs (identified by the "RptDate" variable) and an entire monthly list of jobs, which I want to delete all of them not from the date specified in the variable "RptDate". The fields in column A contain the date in "mmdd" format as the first four digits, and I have that specified in the "B1" celll of the originating workbook.
I found some code in this link Search Column Delete Row If Value Found that looked good. I had to modify it since I needed to search for a variable (RptDate) and needed to search column A and start on row 8 of that column. My current code looks like this:
Sub Macro1()
Dim RptDate As String
Dim RptMonth As String
Dim iLastRow As Long
Dim i As Long
RptDate = Range("B1").Text
RptMonth = Range("B2").Text
Workbooks.Open Filename:=(RptMonth)
Sheets( Array(RptDate, "Total Database")).Copy
iLastRow = Cells(Rows.Count, "A").End(xlUp).Row
For i = iLastRow To 8 Step -1
If Left(Cells(i, "A").Value, 4) <> RptDate Then
Rows(i).Delete
End If
Next i
End Sub
It works fine right up to the "Rows(i).Delete" line. It errors out with a "run-time error 1004, delete method of range class failed" and highlights the above line. I know the fields I'm pulling the variables from are working right since it opens the correct workbook off of one of them.
I'd like to do is click the delete button and when clicked, it will search for matching records in column A & B and if they match... I'm thinking the code for that is <> but I'm not sure, then delete that record, and shift the cells up. Do this until the search results are empty below the delete button. Like I said, it's probably more understandable to look at the workbook.
View 5 Replies View RelatedQ:How to delete reversal entries?
I have debits & credits in the same excel column and i want to delete the matching amounts but with opposite signs.
Example:
A B
Name Amount
1)Mr. A 2000
2)Mr. B 6000
3)Mr. A -2000
4)Mr. D 4000
5)Mr. A 2000
Now i want to matching amount of Mr. A of row 1 & 3 as these two entries are reversing each other. I am poor in english but hope that i have clarified the problem
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................