Columns With Empty Cell Need To Be Populated With Value Directly Above?

Oct 12, 2011

I've populated a temporary worksheet with several columns of data. In this example my Amount Column has several null cells. What I need to do is write a macro to find any nulls and populate the nulls with the data in the last populated cell above it.

Example: the four empty cells below Account (524150) also need to be populated with 524150. The cell immediately below 524200 also needs to be populated with 524200 and the 3 empty cells below 512800 also need to be populated with 512800. Week to week the number of rows will change and the nulls will also change.

View 8 Replies

Remove Empty Rows Based On Range Of Columns If Columns Are All Empty (no Data) Delete

Oct 24, 2012

Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.

VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range

[Code].....

View 1 Replies View Related

How To Sort Columns By Directly Matching Fields

Aug 6, 2014

I have a large list like this:

A 1
B 2
C 3
D 4
E 5

I need only values pertaining to C and D. How do I sort the columns so it becomes like:

C 3
D 4

The rest I don't need.

View 1 Replies View Related

Calculate % Change Across 4 Columns When Only Some Columns Are Populated

Mar 24, 2014

This is a piece of a spreadsheet meant to track patient Range of Motion performance over a max of 4 weeks. How do I calculate % Improvement [write the formula for column J] to account for the fact that sometimes a patient is discharged after being seen 2 weeks OR 3 weeks or 4 weeks. I don't want to change the formula every time.

The SUMMARY % Improvement in J7 - will be changed to the average of each individual patient % Improvement from column J.

Looks like I need a dynamic range from what I can see from Googling. Do I need to use Offset ?

View 6 Replies View Related

Totalling Columns When Both Are Populated

Dec 4, 2006

I want to total column A & total column C but only if there is an amount in both cells on the same row

Can I do this with an array?

Do the columns have to be adjacent? I could make them if necessary.

Data
A C
11 12
21 0
0 17
15 15
11 9

in this example we exclude rows 2 & 3 from the total because one cell contains zero or is blank.

Total Column A = 37 (11+15+11)
Total Column C = 36 (12+15+9)

View 11 Replies View Related

Find The Next Columns Empty Cell

Mar 23, 2014

I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.

Code:

Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean
vFind1 = Me.CBSupplier.Value
vFind2 = Me.CBProducts1.Value
Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)

[Code]...

View 2 Replies View Related

Find Empty Cell Across Columns

Jul 11, 2006

I am trying to find the last cell across the columns in a specific row. i can do it going down using

Range("N6").Select
Selection.End(xlDown).Select

but can not get it to work going across.

View 2 Replies View Related

Delete Columns Where Any Cell In Row X Is Empty

Sep 2, 2007

If a cell in a range is empty, the column should be deleted. However this doesn't work, as the first column is deleted, but the next cell/column to the right isn't detected/deleted. There can be up to 9 empty rows next to each other.

Here's an example of the code...

Sub x()
For Each OutputSheet In Worksheets
If OutputSheet.Visible = True Then
OutputSheet.Select
Range("IV16").Select
Selection.End(xlToLeft).Select

View 9 Replies View Related

Delete Empty Rows And Empty Columns From Word Table

Mar 25, 2014

I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.

Find the attached sample excel sheet and the word documents.

DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎

View 2 Replies View Related

Remove Blanks Across Columns A Through E / Move All Populated Cells In Each Column To The Top

May 29, 2013

Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?

View 9 Replies View Related

Detect Cell Address Of Cell Directly Under Mouse Pointer

Oct 25, 2009

I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.

The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.

My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.

View 6 Replies View Related

Reference To Cell Directly To The Left

Aug 10, 2009

Is there any way to refer to a cell that is directly to the left of the current cell?

I need to create a Comma-Separated Value file with the Excel formula in the CSV file. Because of this, I do not know the current cell location, but want to do something like =(Cell directly to the left of me) + (Cell two cells to the left of me)

View 2 Replies View Related

Get Data From Cell Directly Across Formula?

Nov 7, 2013

Lets say we have prices in column (B) and in column (F) I want to insert a formula that says:

In the same row, look at cell in column (B). If price is between 1000 and 8000 then put 2.00 if price is between 500-999 then put 0.50 if price is between 1-499 then put 0.00

I need to achieve this using something like =OFFSET(INDIRECT(ADDRESS(ROW(), COLUMN())),0,-1) but I am not sure how its done.

I will be using this formula in a find and replace macro. So I can NOT make the typical drag and fill formula.

View 10 Replies View Related

Macro To Edit Directly In Cell

Jun 18, 2009

I have disabled edit directly in cell in the option menu so that when i double click it goes to source file.

View 3 Replies View Related

Move 2 Cells Directly Below The Cell?

Jan 1, 2012

I have the following code that will go down through column "L", look for the value "ATS", and if found will move it to the right 1 cell. this works find,

My need is to also move the 2 cells directly below the cell containing "ATS", then clear the contents of the "Original" 3 cells before going to find the next instance of "ATS".

Sub Move_Values()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("L4", Range("L5000").End(xlUp))
For Each cell In myrange
If InStr(cell.Value, "ATS") > 0 Then
cell.Offset(0, 1).Value = cell.Value
cell.ClearContents
End If
Next cell
End Sub

View 5 Replies View Related

Enter Autosum Data Directly Below The Last Row Of Data In Columns

Feb 25, 2009

I have a spreadsheet that runs a macro resulting in a different number of rows everytime the macro is run. Columns H, I & J are the only columns with currency in them. I would like a macro to find the bottom-most row of currency data in these columns and insert the Auto-sum formula in the row directly below each of these 3 columns. Then bold this row and increase the font by 2 points (or 12).

View 13 Replies View Related

Running Clock In Excel Cell Directly

Jul 17, 2014

How we can put a running clock in Excel Cell directly .

View 2 Replies View Related

Run-time Error 1004 (founds An Empty Cell The Value For One Cell Is Copied To The Empty Cell)

Feb 26, 2009

I have a workbook with over 900 worksheets.

The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.

But in one worksheet it stops with the error:

Run-time error '1004'
Application-defined or object-defined error

View 2 Replies View Related

Create A Long Series Of Checkboxes In Which Each Box Is Linked To The Cell Directly To The Right Of It

Nov 10, 2008

I need to create a long series of checkboxes in which each box is linked to the cell directly to the right of it. When I try to copy and past the checkbox, the link doesn't update. Which means I have to go in manually and change every checkbox link.

View 3 Replies View Related

Filling Empty Cell Value Based On If Else Condition And Delete Row More Than 2 Cells Empty

May 23, 2014

Here find the excel file

My requirement

1) 4 values contains in each row based on the values from those cells the max value will display.

2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.

3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.

View 1 Replies View Related

Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?

May 8, 2014

I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.

I am using code similar to the below:

[Code] .....

View 5 Replies View Related

Auto Populate Cell With Static Date As Another Cell Is Populated

Jan 25, 2008

I have used the following =IF(ISBLANK(Q6),"",(NOW())) & =IF(ISBLANK(Q6),"",(Today())),
but when the excel file is closed and opened the date changes to now or today. How can I make the date stay and not change?

View 4 Replies View Related

Returning The Contents Of A Non-empty Cell In A Range Of Empty Cells

Jan 8, 2008

I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?

I would do this with a series of nested IF statements if there weren't more than 30 of them!

View 9 Replies View Related

Is A Cell With A Formula Considered True Or Is It Empty If The Criteria Is Empty

May 30, 2009

Is a Cell with a formula (like shown below) considered true, or is it empty?

=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?

If Scorecard!$B$13 was True...
A cell with the above formula would be True.

View 9 Replies View Related

Hide Value When Cell Is Not Yet Populated?

Feb 19, 2013

how to hide a value on a cell when another cell is not yet populated?

like for example:

A1 is Blank A2 has a formula of workday(A1,2) a date will appear on the A2 cell and I want not to show or be hidden the date in A2 until A1 is populated

View 3 Replies View Related

Finding Out If A Cell Is Populated

Jun 4, 2009

I am now looking for a command that will return if a cell is populated. I.e. I need something that will find out which cell is the last one populated in a column (populated = contains data) and then will move 2 cells down, and then will enter some data into the following cells.

View 4 Replies View Related

Get Cell To Become Hyperlink After It Has Been Populated?

Jul 12, 2012

I am trying to get a cell to become a hyperlink after it has been populated.

For Example:

If cell H42 of Sheet 1 = [ X ] Then create a hyperlink to cell B2 of sheet 2.

I have been trying quite a few different things the latest I have written is the following:

Sub Macro1()
Dim cell As Object
Set cell = [ X ]
If H42 = cell Then
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="", SubAddress:= _
"Sheet2!B2", TextToDisplay:="[ X ]"
End If
End Sub

View 2 Replies View Related

Copy Last Populated Cell

Jan 23, 2013

I am trying to write some code to choose the last "comments" entered in column 13 and then copy the data to B17 on the specified sheet below.

I get an Excel Error Excel cannot complete this task with available resources. Choose less data or close other application THEN a VB error Method'open' of object 'Workbooks' failed

Code:
Dim MyMgr As String
Dim whichsheet as string

MyMgr = Range("D10")
whichsheet = Range("D11").Value

If MyMgr = "Manager1" Then
Set myBook = Workbooks.Open("destination", Password:="manager1") 'Home

[Code] ........

View 3 Replies View Related

How To Catch Last Populated Cell In A Row

Feb 12, 2013

I have to create a formula to fine difference between 2 numbers.

There are columns A to Z.

Values will be populated in A1 to Z1. Sometimes the value will stop in between itself. For example H1.

So, I need a formula to catch the last populated cell (H1 in our case) and then find the difference between the value in its previous column.

H1-G1 should be the result I should get.