Multi-summing For A Check Register
Sep 23, 2002
I have a column of blank cells m11 throught m22. Each cell possibly holds a value of a check that has been written but has not cleared.
One cell on my sheet contains a difference of my previous bank balance and my new bank balance after an unknown number of checks have cleared.
My bank balance was $500.00 dollars on 9/22/2002
Checks that have not cleared =
m11 = $5.00
m15 = $15.00
m16 = $35.00
m20 = $6.00
-----
My account balance is now $489 dollars on 9/28/2002
$11.00 dollars is the difference.
It's obvious that checks $6.00 and 5.00 are the checks that have cleared!
What I am trying to do is find out a simple way to sum every number that is listed in m11:m22 in every sum combination possible.
Then display the combonation of numbers that = the difference when summed together
I know the long way to do this.........................
View 9 Replies
ADVERTISEMENT
Nov 27, 2006
I have a spreadsheet that I have setup as a "Check Register". (I actually downloaded it from the Microsoft website.) I have modified it a little to have a small budget for the account at the top of the page, and I want to automate this a bit.
So, here is the question.
As I make the entries on the rows, how can I automatically update a cell with the result (the account balance) as I go?
Here is the formula I am using:
=IF(AND(ISBLANK(F20),ISBLANK(G20)),"",H19-F20+G20)
On my sheet I want G4 to display the result, as I go.
View 9 Replies
View Related
Jul 14, 2008
i have created a workbook that looks for files and creates hyperlink within a worksheet to these files, to help the user I have included the title from the document properties.
To get the document properties i used the DSOFile DLL from Microsoft and added it in to my project and it works fine.
My problem is that i wish to distribute this to a large group of users within the workplace and I need a method of checking if the DLL is added in and registered, if not can it be added in and registered on the fly.
I have tried placing the DLL on a common network drive, but this could be further complicated b some users taking laptops out of office but hopefully the microsoft synch of files might take care of this.
View 9 Replies
View Related
Apr 6, 2014
I need to add over 100 rows on the top of my check register worksheet, is there any way to do automatically?
View 4 Replies
View Related
May 15, 2007
I've created an array that is 60 pairs of cells wide. Each row in the array represents a different account. The 60 pairs of cells contain up to 60 payments in a payment stream. The first cell of each pair may contain an amount of interest to be paid, or zero if the time band in which it was/will be paid is not within the time range that I'm evaluating. The second cell of each pair may contain a number between 1 and 10 representing the time band in which the interest will be paid, or zero if the payment date falls outside of the time bands.
I need to be able to sum the interest to be paid in each time band for all of the accounts in my database.
Is there an Excel function that I could use or will I need to write some VBA code to loop through each row?
View 9 Replies
View Related
Jul 8, 2009
I want to create a column where the user can input ANY data (number, symbol, letter, etc.) and create a sum. Basically, I want to be able to add "checkmarks" where the checks have a predetermined value based on the column the check is placed.
View 5 Replies
View Related
Jun 30, 2014
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
View 5 Replies
View Related
Jul 22, 2009
I'm sure this has an easy solution, but I'm having a problem putting it into a working formula. Column I lists checks numbers. Column J contains the amount of the check. Column K contains a "Y" when the check clears the account, otherwise it's left blank until the item clears. Cell O2 is where I want the balance formula.
I want O2 to look at Column K & then sum the amounts from Column J where the corresponding Column K is blank. If it were just one cell, it's a pretty easy if(k4="Y","", j4), right? But since it's a range of cells, not sure how to tell it to look down the range for all uncleared checks and put the sum in one cell.
View 2 Replies
View Related
Mar 6, 2007
I want to build a cash register from excel.
I want to put many buttons, but lets say one on A1 that says $2 dollar item and name and lets say this $2 doillar item button is pushed(clicked on), it will add $2 to lets say the total say A15.
Now I can't even get a Macro to add $2 dollars to A15(or any macros to run at all, anybody have code I can copy, what I understand is you create macro name(give it letter, so yo can press letter and Ctrl to start) then start recording, then you do key strokes or mouse? Then press stop recording and you have macro?).
To get buttons to be viewed I have to go to Tools - Macros - script editor, and drag and drop(button on coding) or double click on button tool bar then File - View in Browser - . I get button but can't get it to do anything.
How do you put say A1 in code to A1=A1+5 or make a memory location out of A1. Now you can go to(while A1 is selected cell) "Insert" then "Name" then "Define" and give A1 a "Name". I can't get this name to work in coding(but I can get the name to work in cells like "Name" +5, will add cell 1 and 5, if you do it in different cell than A1).
View 5 Replies
View Related
Aug 15, 2014
Working on a Checkbook Register/Monthly Budget.In column A I have the Check # or Type of Transaction, in column D is Debit, in column F is Credit, and in column G is Balance. I am writing the Check #, Debit, Elect., or Bill in column A.What I want to do is write a formula in column H to find all the Bills in column A and add all there Debit in column D together. I don't know if I change the word Bill to a code # if that would work or not. If it does, could I use a range of number of different bills like 200-299.
Example: If (A2-A50) = "Bill" or (200-299) add the same row # in column D for a total sum.Would like to use the code # if possible so I can budget the Bills individually if possible.
Using the Formula: =IF(ISBLANK(C3),"",G2-D3+F3) in column G for Balance, don't want to mess with this formula.
View 6 Replies
View Related
Jun 7, 2009
I'm working on a sheet where I can specify sales by selection of month (Sheetname= ZoekenMaand).
Everything works fine for the months "januari" and "februari" (yes, it's in dutch ) but from "maart" it doesn't seem to work any more.
View 3 Replies
View Related
Jul 16, 2013
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
View 7 Replies
View Related
Aug 21, 2013
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
View 2 Replies
View Related
Sep 25, 2013
how to search a defined range (using namned range and offset to last non empty row) and register row number for the first occurance of each ID using VBA. I made an example file where I need to search column A (search range using namned range "ID" and offset to last non empty row) and register rownumber for the first occurance of each ID in Column C.
example.xlsm
View 1 Replies
View Related
Nov 11, 2011
I have a register of items that sometimes get updated, the register is stored as
From row 9:how ever many hundreds of items we have
Columns A:E
Data about the item that does not change with new revisions
Column F
Current Revision
Columns G:Z
Revisions in order (ie if there had been 8 revisions
'-, A, B, C, D, E, F, G) (with higher revisions left blank)
each of which is hyperlinked to the relevant file for that revision.
What I would like is a formula in Column F that will print
1) the letter of the highest revision (Revisions are always sequential)
2) Will hyperlink the column F to the correct revision...
I used to know how to do the first half of this formula but the spreadsheet got tinkered with and now I can't remember how to do it.
View 3 Replies
View Related
Aug 22, 2007
With reference to Cash Register example that I downloaded from Roy Cox; is it possible to link the numerical keypad that is created in the file to the PC Keypad.
I realise I would need to use keypress functions but am unaware of the ascii for these keys. Also; how do I limit that the keypad writes it to the label? Otherwise, would I need to create a new userform instead of what was created by Roy.
View 3 Replies
View Related
Apr 3, 2013
I've been looking for a free checkbook register template that will automatically calculate the balance as you add or subtract various amounts.
I found one which seemed to be just what I wanted but once I had reached the end of the rows for the worksheet and tried to add more rows the automatic feature quit working.
I found another Checkbook Register which seemed even better than the first one as it had a notation at the end of the rows.
It said to " Insert new rows above this point" and it had the last row greyed out.
I tried adding a new row and tested it out by adding some amount but it did not continue with the automatic calculation either.
I'm using MS Excel for Mac 2011
View 4 Replies
View Related
Jan 28, 2014
I'm wanting to make a checkbook register. That part I can do (I am totally an Excel idiot, but I'm fairly decent with Google and I couldn't seem to find anything about this), but I'm wondering if auto-drafts are possible. What I'd like to do is have a table of regular auto-withdrawals (or deposits, for that matter) and then on the appropriate day have them auto enter into the register. Ideally, I'd like them to enter 2-3 days in advance, or even at the beginning of the month.
For example: Netflix on the 1st, Life Insurance on the 12th, Auto Insurance on the 15th, etc.
View 2 Replies
View Related
Jul 2, 2014
So i've been trying to do this invoice/inventory/client , I couldn't find a way to somehow register the whole invoice as it is, so i can later print/visualize it if i lost the copy or something.
It would be best if it just stayed stored in a variable and not always visible, and only appeared if i wanted to check/print it.
The whole invoice would be from A1 to F30
Excel 2010 btw
View 5 Replies
View Related
Nov 27, 2009
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
View 9 Replies
View Related
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Nov 3, 2008
I am using this code
View 5 Replies
View Related
Jul 4, 2014
I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
View 1 Replies
View Related
Sep 9, 2007
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
View 9 Replies
View Related
Aug 20, 2009
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
View 3 Replies
View Related
Jan 8, 2010
I want to sum data in COLUMN C that is related to COLUMN B if the COLUMN F is blank.
View 10 Replies
View Related
Dec 7, 2008
I have to have to have 2 criterias for it to pass before the items are counted
I have 2 columns of data.
1 being a list of clients names, and 1 being if the Connection/Abandoned
Client Column is colum "F"
Connection/Abandoned is colum "J"
I need to count how many Connected and how many abandoned for each client
So if "F" equals "BPS" and "J" equals "Connected", then count.
View 13 Replies
View Related
Feb 4, 2009
I have a spreadsheet which have data auto inported. (thanks to previous help on here). I have now come up against the next problem.
I wish to make the mark up variable depending on 5 options (workings I13;I17)
the choice is selected in column b after the data has been inported
then down on Rows 75 - 79 i have the totals of my choices.
Unfortunatly i do not know how to do a variable sum
I have attached a copy of the workbook.
View 6 Replies
View Related
Jul 24, 2008
What is the best method for searching and replacing within a string when the string to be replaced could be say 1 of 10 options and could appear in any position within the string ? To make it easier let's say wherever those sub strings appear they are to be replaced (ie none to be left behind), and lets say they are all to be replaced by another character -- specific to each string being replaced.
Example:
Say I want to replace any digits in a string, to be replaced like for like as follows:
0 -> a
1 -> b
2 -> c
3 -> d
4 -> e
5 -> f
6 -> g
7 -> h
8 -> i
9 -> j
Sample strings:
Luke is 0 Donkey
Luke is 0 Mul4
0nd Luk4 is not very cl4v4r
Luke can not h40r very w4ll.
etc...
View 9 Replies
View Related
Jan 22, 2007
I am trying to sum the error points of staff in their work done based on a specific time frame. For example,from 4.00pm to 4.30 pm as per the attached. I tried sum product but did not work. Is there an addition formula that I need to use when incorporating time ?
View 6 Replies
View Related
