i have created a workbook that looks for files and creates hyperlink within a worksheet to these files, to help the user I have included the title from the document properties.
To get the document properties i used the DSOFile DLL from Microsoft and added it in to my project and it works fine.
My problem is that i wish to distribute this to a large group of users within the workplace and I need a method of checking if the DLL is added in and registered, if not can it be added in and registered on the fly.
I have tried placing the DLL on a common network drive, but this could be further complicated b some users taking laptops out of office but hopefully the microsoft synch of files might take care of this.
I have a spreadsheet that I have setup as a "Check Register". (I actually downloaded it from the Microsoft website.) I have modified it a little to have a small budget for the account at the top of the page, and I want to automate this a bit.
So, here is the question.
As I make the entries on the rows, how can I automatically update a cell with the result (the account balance) as I go?
I have a column of blank cells m11 throught m22. Each cell possibly holds a value of a check that has been written but has not cleared.
One cell on my sheet contains a difference of my previous bank balance and my new bank balance after an unknown number of checks have cleared.
My bank balance was $500.00 dollars on 9/22/2002
Checks that have not cleared =
m11 = $5.00 m15 = $15.00 m16 = $35.00 m20 = $6.00
-----
My account balance is now $489 dollars on 9/28/2002
$11.00 dollars is the difference.
It's obvious that checks $6.00 and 5.00 are the checks that have cleared!
What I am trying to do is find out a simple way to sum every number that is listed in m11:m22 in every sum combination possible. Then display the combonation of numbers that = the difference when summed together
I know the long way to do this.........................
What I'm basically trying to do is make a code that looks at where the "x" values are in my range and if the month matches the current month, open a pop up that says "Service Required: Equipment Name" when the file is opened.
If it's any easier, an actual date could be written instead of an x.
An alert system for service required if you will. I have attached a file.
I'm sure this has an easy solution, but I'm having a problem putting it into a working formula. Column I lists checks numbers. Column J contains the amount of the check. Column K contains a "Y" when the check clears the account, otherwise it's left blank until the item clears. Cell O2 is where I want the balance formula.
I want O2 to look at Column K & then sum the amounts from Column J where the corresponding Column K is blank. If it were just one cell, it's a pretty easy if(k4="Y","", j4), right? But since it's a range of cells, not sure how to tell it to look down the range for all uncleared checks and put the sum in one cell.
I want to put many buttons, but lets say one on A1 that says $2 dollar item and name and lets say this $2 doillar item button is pushed(clicked on), it will add $2 to lets say the total say A15.
Now I can't even get a Macro to add $2 dollars to A15(or any macros to run at all, anybody have code I can copy, what I understand is you create macro name(give it letter, so yo can press letter and Ctrl to start) then start recording, then you do key strokes or mouse? Then press stop recording and you have macro?).
To get buttons to be viewed I have to go to Tools - Macros - script editor, and drag and drop(button on coding) or double click on button tool bar then File - View in Browser - . I get button but can't get it to do anything.
How do you put say A1 in code to A1=A1+5 or make a memory location out of A1. Now you can go to(while A1 is selected cell) "Insert" then "Name" then "Define" and give A1 a "Name". I can't get this name to work in coding(but I can get the name to work in cells like "Name" +5, will add cell 1 and 5, if you do it in different cell than A1).
Working on a Checkbook Register/Monthly Budget.In column A I have the Check # or Type of Transaction, in column D is Debit, in column F is Credit, and in column G is Balance. I am writing the Check #, Debit, Elect., or Bill in column A.What I want to do is write a formula in column H to find all the Bills in column A and add all there Debit in column D together. I don't know if I change the word Bill to a code # if that would work or not. If it does, could I use a range of number of different bills like 200-299.
Example: If (A2-A50) = "Bill" or (200-299) add the same row # in column D for a total sum.Would like to use the code # if possible so I can budget the Bills individually if possible.
Using the Formula: =IF(ISBLANK(C3),"",G2-D3+F3) in column G for Balance, don't want to mess with this formula.
how to search a defined range (using namned range and offset to last non empty row) and register row number for the first occurance of each ID using VBA. I made an example file where I need to search column A (search range using namned range "ID" and offset to last non empty row) and register rownumber for the first occurance of each ID in Column C.
I have a register of items that sometimes get updated, the register is stored as
From row 9:how ever many hundreds of items we have
Columns A:E Data about the item that does not change with new revisions
Column F Current Revision
Columns G:Z Revisions in order (ie if there had been 8 revisions '-, A, B, C, D, E, F, G) (with higher revisions left blank) each of which is hyperlinked to the relevant file for that revision.
What I would like is a formula in Column F that will print
1) the letter of the highest revision (Revisions are always sequential) 2) Will hyperlink the column F to the correct revision...
I used to know how to do the first half of this formula but the spreadsheet got tinkered with and now I can't remember how to do it.
With reference to Cash Register example that I downloaded from Roy Cox; is it possible to link the numerical keypad that is created in the file to the PC Keypad. I realise I would need to use keypress functions but am unaware of the ascii for these keys. Also; how do I limit that the keypad writes it to the label? Otherwise, would I need to create a new userform instead of what was created by Roy.
I've been looking for a free checkbook register template that will automatically calculate the balance as you add or subtract various amounts.
I found one which seemed to be just what I wanted but once I had reached the end of the rows for the worksheet and tried to add more rows the automatic feature quit working.
I found another Checkbook Register which seemed even better than the first one as it had a notation at the end of the rows.
It said to " Insert new rows above this point" and it had the last row greyed out.
I tried adding a new row and tested it out by adding some amount but it did not continue with the automatic calculation either.
I'm wanting to make a checkbook register. That part I can do (I am totally an Excel idiot, but I'm fairly decent with Google and I couldn't seem to find anything about this), but I'm wondering if auto-drafts are possible. What I'd like to do is have a table of regular auto-withdrawals (or deposits, for that matter) and then on the appropriate day have them auto enter into the register. Ideally, I'd like them to enter 2-3 days in advance, or even at the beginning of the month.
For example: Netflix on the 1st, Life Insurance on the 12th, Auto Insurance on the 15th, etc.
So i've been trying to do this invoice/inventory/client , I couldn't find a way to somehow register the whole invoice as it is, so i can later print/visualize it if i lost the copy or something.
It would be best if it just stayed stored in a variable and not always visible, and only appeared if i wanted to check/print it.
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####" 12 digit should be "###### ######" 13 digit should be "# ###### ######" 14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code: Sub Tester()
Dim WB As Workbook Dim WS As Worksheets Dim modCounter As Long Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm") Set WS = WB.Sheets(BM18)
I have been given a worksheet which has 5000 rows spread along 13 columns. There are about 200 cells that I am interested in from this sheet, these cells being the subtotals of the cells above them.
I have extracted the individual cells containing the subtotal values to a new, empty column but they are spread down this column with blank cells in between.
Is there a function / formula to get rid of the 4800 blank cells so that the data I need is compressed into a stack of 200 cells all filled with data?
with the line "Sheets("Hidden Data").cells(rngfound.row, 9) = sheets("data").range("l18")" the error messages states Object Required, but i am not sure what this is trying to say.
any idea's or thoughts would be greatly appreciated.
at the top of the coding i have listed "Public rngFound"
I am creating a training matrix that will be used in a number of locations. Some only have a few staff members whilst others have lots. I want each location to print a list on a formatted sheet but I want to set it up so that the locations with fewer people don't end up with lots of blank lines.
Why should I set objects to nothing (ie clear them) just before ending a sub routine? Doesn't excel dump the variables after the sub is finished running?
I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
I have two columns E, F in excel. Rows are dynamic. In the sense that sometimes only 2 rows appear or sometimes newer rows appear......
Now I want to lookup the last row and get the required numeric value. I have written the following formula to get the result. =VLOOKUP(CONCATENATE("E",SUM(COUNTA(E2:E16),1)),E2:F16,2). It returns value 60. But when I add 2 new rows.
7 F 70 8 J 90
It should return 90. But it is still showing up 60. when i checked CONCATENATE("E",SUM(COUNTA(E2:E16),1)). it is returning 'E8' correctly. But VLOOKUP unable to return correct value.
I have a worksheet with a header row.the data is from B2:B25.I have to accomplish two things.
i)I want to get only 8 records (viz record nos-5,6,11,12,17,18,23,24)from the entire worksheet.serial numbers are shown only for illustration purpose.i want to eliminate all other records from the worksheet.then i will get the records from seriel numbers 1-8 as shown in E2:E9.
(2)I want the content of row3 to come up in C2 and then row3 should be deleted. now the content of row4 should come up to C3 and then row4 should be deleted.it should continue.the result will be 4 records as shown in G2:H5
I recorded a print macro which prints to my default printer, others will be using this spreadsheet so I really need it to print to the same network printer. The printer address and name is: ironyan-fileBI44
I need a loop function (i guess a do while or do until code) so whenever the word 'Non-Current' appears in colum A enter a 1 in colum E until the word 'Total Non-C' is reached at which point the loop must end. Such as: A B C D E NON-CURRENT 6 4 5 1* ABSA 4 5 2 1* BARCLAYS 3 2 8 1* NED 0 8 6 1* TOTAL NON-C 4 6 7 0
The buttons are located on the PFM Tracker sheet with what I need them to do. In addition I'll give you a breakdown of what is required.
Currently when the workbook is opened the user is forced to activate the macros. One of these macros disables the Cut, Copy Paste features within Excel. I need the first button 'Enable Copy' to request a password for activation and once entered the Cut, Copy, Paste feature to be enabled. Then when finished the 2nd button 'Disable Copy' when clicked to re-activate the Cut, Copy, Paste Disabled macro.
Hope that explains it. I have left the PFM Tracker sheet unprotected for who ever wants to play with it. (Not that protection would stop some)
