I joined a file so that you guys can understand what my problem is! In test4.xls there is 4 sheets. The one named "End" should appear in a new workbook. So i'm trying to make a macro that will transform sheet A,B and C into the sheet "End" in a new workbook! i know i have to transpose the data, but i didnt find how! The problem is that the macro have to work for each month of any years(2006,2007,etc)! Anyone know how to do it?
writing a macro that could save me loads of time. In the attached file there are 2 separate sheets of data ( named "Elements Innovation" and "Dinttap") that I need copied, pasted, transposed and consolidated into one master sheet (named "Desired result"). Note that the fields that relevant cells are highlighted in yellow. In reality I'll have many (~100) of these sheets that I need the data extracted from, and the work looks like it can be automated using VBA to speed things up.
View 2 Replies View Relatedthis may or may not be easy for some of you but its driving me nuts. Here's what I need to do.
1.Create a new workbook
2.Cycle through multiple workbooks and all worksheets within each workbook (all in the same folder). All workbooks will have the same structure.
3.Take the worksheet names and put them in rows
4.Take the data from the first column (column A) from the first worksheet of the first workbook and put them across the top (i.e. transpose the data). The first column will be the same in all workbooks so it doesn't matter where I get it from.
5.Copy the data from column E from each worksheet and paste them in rows in the new workbook (again transpose) corresponding to each worksheet.
6. Perform simple mathematical calculations at the end of each row.
I expect to have approximately 26 workbooks with a total of 7000 worksheets. In the target workbook (i.e. the new one), I expect there to be 7000 rows (corresponding to the 7000 worksheets) and about 260 columns.
The only reason I need to transpose stuff is because Excel 2007 doesn't have 7000 columns.
Here's an example of what it would look like.
Example worksheet (Input)-
Worksheet ABC
Col A Col E
1/1/2004 $25
1/8/2004 $30
1/15/2004 $15
Imagine another worksheet called LMN with the same ColA but different values in Col E.
Output workbook
ColA Columns B Column C Column D
Sheet 1/1/2004 1/8/ 2004 1/15/2004
ABC $25 $30 $15
LMN $xxx $yyy $zzz
Basically, what I am trying to do is my workbook has 12 sheets, 1 for each month. In cell A7 on the first sheet (Jan) I would like to enter 01-01-2009 and then it add a month on each of the sheets. e.g. 01-02-2009 01-03-2009 and so forth. I know I can manually put in the first of the month on each of the sheets, just wondering if it can be automated.
View 3 Replies View RelatedI need work book which has multiple sheets like the one attached. i need to change my start date from June to september quarter.
However, I cant just delete a column and change the dates as there are differences that occur throughout the cash flow... (see row 147)
Is there an easy way to bump everything over and yet still take into account the changes that occur?
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
Sub Macro5()
'' Macro5 Macro
Range("D2:D25").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
[code].....
I have multiple sheets on which users enter data in Cells B3 to B21 on each sheet.
I have a master sheet where the information entered on individual sheets is copied by links. On the master sheet the information is displayed in Rows. Thus data on Sheet1 B5:B25 is displayed in Row 6 cells H6:Z6 of Master Sheet, data on Sheet2 is displayed in Row 7 cells H7:Z7 etc. The formula in H6 of the Master Sheet is =Sheet1!B5, in H7 it is =Sheet2!B5 etc. It is of course not possible to use Autofill to copy formulas across on the Master sheet. It can be done manually but there are hundreds of cells to fill.
Is there an elegant way to copy the formulae on individual sheets onto the Master Sheet.
I want to be able to repeat the procedure later if additional sheets need to be added.
i want a macro to search all of column A in multiple sheets for a date that has been put into an input box.
the matching dates have data corresponding to them in that row. i want the date and data from the row to then be copied into a new sheet.
I was planning to transpose this sample data into the output designated below.
Original sample: (There is an empty row after every 4 entries)
Name: xxx
Email: xxx
Phone Number: xxx
Address: xxx
[Code].....
Twelve months of Data.
Each month in Columns
like so:
The labels are on the left.
The data is in each column to the right.
From column 2 to the end of the sheet at far right.
Family Size
One: 1 3
Two: 2 1
Three: 1 2
Four: 1 1.....................
What i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies View RelatedI need to create a list that has one row per paid date per customer on a new worksheet. My source data has one row per customer with the paid dates across 12 month columns. I have many rows in the source data with zero paid on all 12 months and I'd like to filter those out in the process.
This is not a simple Transpose because I want the customer number, and customer name to repeat for every instance of a paid amount.
I have attached a sample file with the current and desired layouts of the data.
I have attached a spreadsheet of the data i need altered.
Column 1 - Time
Column 2 - Date
Column 4 - Data for Site
I need these to be easily formatable, Is there any way of producing a macro which will format these as follows?
Row 1 - TIME
Column 1 - Date
Data filled in correct place,
I have placed a sample of the output format in the work book.
This is a snippit of my table1000 employees)
Benefit Emp1#Emp2#Emp3# ... ...
Earnings Pay34885.3541553.5825012.36
Health Insurance4317.0304317.03
[Code].....
This is a snippit of my table1000 employees) ...
View 4 Replies View RelatedI have following information. I need to transpose the columns into rows
C
10001
V
1000
V
1001
V
1002
C
10002
V
1001
V
1003
C
10003
V
1001
V
1003
V
1004
The expected result should be like
10001 1000 1001 1002
10002 1001 1003
10003 1001 1003 1004
I have an problem transposing multiple columns into a table. Source data is organized in 3 columns - ID, Visit#, Date. What I need is a seet in which I'd have in Column A - and ID, in Row 1 a Visit type and Visit date would be populated in the table. See attached file. Since I'm handling about 50k datapoints a simple "paste special--->transpose" is a nightmare.
View 5 Replies View RelatedBefore
XYZ1
XYZ2
XYZ3
XYZ4
XYZ5
XYZ6
XYZ7
After
XXXXXXXYYYYYYYZZZZZZZ1234567
[Code] .....
I would like to ask how can I transpose this:
COMPANY1WEBSITE1FullnameAddressCity, State zip codetel numberdescriptionCOMPANY2WEBSITE2FullnameAddressCity, State zip codetel numberdescriptionCOMPANY3WEBSITE3FullnameAddressCity, State zip codetel numberdescriptionCOMPANY4WEBSITE4FullnameAddressCity, State zip codetel numberdescriptionCOMPANY5WEBSITE5FullnameAddressCity, State zip codetel numberdescription
to this:
COMPANY1WEBSITE1First NameLast NameAddressCityState zip codetel numberdescriptionCOMPANY2WEBSITE2First NameLast NameAddressCityState zip codetel numberdescriptionCOMPANY3WEBSITE3First NameLast NameAddressCityState zip codetel numberdescriptionCOMPANY4WEBSITE4First NameLast NameAddressCityState zip codetel numberdescriptionCOMPANY5WEBSITE5First NameLast NameAddressCityState zip codetel numberdescription
This is a sample of the attached workbook.
Project
Task
Current Phase
Start Date
Planned Finish
Status
[Code]...
What I am trying to do is break up the "Phase" column into several columns, where each phase would have its own column. Something like this:
Phases
->
->
->
->
->
Project
Task
01.
02.
[Code]...
It is very important that the output of the data goes on a new sheet, and that the records maintain integrity.
I have a set of data that I need to change the "layout" of. I've had similar situations before, but this one is just killing me. Basically, my data is for item pricing. It is represented as
Item, QTY, Price
A,1,1.25
A,10,1.1
A,25,1
A,100,0.9
B,1,1.25
B,10,1.1
B,25,1
B,100,0.9
C,1,1.25
C,10,1.1
C,25,1
C,100,0.9
Item D,Qty1,P1
Item D,Q2,P2
Item D,Q3,P3
Item D,Q4,P4
However, I need it in the following format:
A,1,10,25,100,1.25,1.1,1,0.9
B,1,10,25,100,1.25,1.1,1,0.9
C,1,10,25,100,1.25,1.1,1,0.9
Item DQ1Q2Q3Q4P1P2P3P4
As a note: there is a maximum of 4 Price/QTY breaks, so the script can be hard coded for that. When I tried this, I had it looking at the Item column, finding out how many breaks there are for a specific item and then doing a loop to extract the qty and price to a single row in the format shown above. It worked for the first 2 items, but then the loop got throw off. I will see if I can reproduce the code for that.
I have a list of comma separated values. I would like to change these to tab separated values, and then transpose them so that they are all displayed in one column. Does anyone know if it's possible to do this in Excel 2007?
Example:
Date | Keywords
1/01/01 | shoe, shoes, clothes, clothing
1/02/01 | shirt, shirts, jacket, jackets
I need the Keywords column to display each value separately, and in one column. I also need each row to have the original date information. So I need it to look like this:
Date | Keywords
1/01/01 | shoe
1/01/01 | shoes
1/01/01 | clothes
1/01/01 | clothing
1/02/01 | shirt
1/02/01 | shirts
1/02/01 | jacket
1/02/01 | jackets
I want to write macro for below requirement.
I have 10 file in a folder and in that there is address, pone and other detail of employees in these sheets it will be static from D3 - D13 rows. Which is of below format:
Original format
Name
Address1
Address2
Phone
Sex etc..
I want to the above data to populate from these 10 sheets to one sheet (new workbook) as columns as below format :
Sl.#, Name, Address1, Address2, Phone, Sex etc...
I want to write an macro to achieve this. Please let me know your views to achieve this functionality.
How to selectively transpose a row of dates to columns. I'm not sure exactly how to explain this, so below is an example of what the data look like entered into the spreadsheet:
study ID
provider
visit 1
visit 2
visit 3
visit 4
visit 5
[Code]....
I'd like to extract the data into a new table on another worksheet that looks like this:
Date
provider
study id
visit #
7/21/13
Test Name
10001
[Code]...
This is just a quick example, but basically it would continue through all possible visit dates for the first study ID, then move to the next row of data (i.e. the next study ID) and extract the data from the row and transpose it in the appropriate columns moving down...
I need to create a macro in excel that will take data for a particular year in vertical rows and transpose it to horizontal rows.
What the data originally looks like:
380204198401014.72
380204198402016.34
380204198403015.66
380204198404013.71
380204198405013.86
380204198406013.51
[Code] ........
What I want the transposed data to look like:
StationYearJanFebMarAprMayJunJulAugSepOctNovDec
38020419844.726.345.663.713.863.5113.69 3.611.362.812.522.25
38020419853.194.211.021.292.372.416.082.500.143.196.122.04
I have never written a macro before and have tons of records (over 40,000) so using this will save me a lot of time.
I transposed them into a separate sheet and used that for my lists. I have to share the file with macs.
My pc is on Vista running Excel 2003. The macs are OSX Panther (not Leopard) and running Excel 2003.
Solution (?): if I make the combobox lists programmatically, it will work on the macs?
The UserForm1 with 3 comboboxes:
The comboboxes are not dependent on each other.
For each combobox, I need to have 2 columns.
For each column, I need to transpose 2 x ranges (they are NOT contiguous)
My attempts have been embarassing and futile.
What it should be: ....
I am stumped on how to transpose multiple columns to rows based on specific criteria. Here is an example of the data I am working with:
Acct #Rev CodeUnitsCharges10094537034503$0.0010094537034501$605.0010094537037101$0.0010096359034503$0.0010096359034501$355.0010096359037101$0.00
I want it to look like the following:
Acct #Rev CodeUnitsChargesRev CodeUnitsChargesRev CodeUnitsCharges10094537034503$0.004501$605.007101$0.0010096359034503$0.004501$355.007101$0.00
I should note that there is oftentimes more than three rows for the same account number, sometimes it could be as many as 20 rows for the same account.
How to convert multiple Rows recors to a single row record in a Notes(csv) format? Have update my xls file. My source is in the below format(Source.xls):
GroupName_A,Name_A
GroupName_A,Name_B
GroupName_A,Name_C
GroupName_B,Name_D
GroupName_B,Name_E
GroupName_B,Name_F
GroupName_B,Name_G
GroupName_B,Name_H
GroupName_B,Name_I
I want to convert it to a CSV file where by it can be import to Lotus Notes (output.xls):
1,1,Group,GroupName_A,"Name_A,Name_B,Name_C","CN=John Sam/OU=FIN/OU=staff/O=IBM,CN=Mary Flow/OU=FIN/OU=staff/O=IBM",CN=John Sam/OU=FIN/OU=staff/O=IBM
1,1,Group,GroupName_B,"Name_D,Name_E,Name_F,Name_G,Name_H,Name_I","CN=John Sam/OU=FIN/OU=staff/O=IBM,CN=Mary Flow/OU=FIN/OU=staff/O=IBM",CN=John Sam/OU=FIN/OU=staff/O=IBM
As you can see only GroupNameN, and Name_N are varibles, the rest of the fields are static. note that there is opening and closing quota for column "E" and "F" in output.xls
I need to transpose a three column worksheet with thousands of rows containing repeats based on the value in Column A (between 2 and 11 consecutive repeats), into rows with no repeats, and the values from the repeated rows into new columns. Column A has a unique numeric value corresponding to the repeated rows. Column B has 1 of 11 values and Column C has 1 of 4 values.
The worksheet looks like this:
1 abc x
1 def y
2 ghi x
2 abc n
2 lmn x
2 def z
2 jkl y
I need to make it look like this:
1 abc x def y
2 ghi x abc n lmn x def z jkl y
I tried using the following code, but it dropped all the values from column C:
Sub kTest()
Dim a, i As Long, w(), k(), n As Long
Dim dic As Object, ws As Worksheet, s As String
Set dic = CreateObject("scripting.dictionary")
dic.comparemode = vbTextCompare
With Sheets("sheet1")
a = . Range("a2:b" & .Range("a" & Rows.Count).End(xlUp).Row)
End With
I am attaching a workbook " Book 1" that has the results from the above macro in the first worksheet "Final Report", the origninal data "orig data", and the format I need to get the data into "needed data".
I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
