Combining Data To Sheet3
Jan 19, 2010
I have been trying to work between Access and Excel and my forehead is getting bruised from the brick wall in front of my desk. I am finding Excel much more useful, but request some help with the final tasks.
Column1 of Sheet1 is an identifer. This number, in some cases is repeated which is necessary for when I include this data back into the master sheet. I make note of identifing this as 'text' as to not lose any zeros or go 'scientific'.
Column1 of Sheet2 is the same identifer but does not repeat (hence fewer rows). Column2 of Sheet2 is the city name which the identifer in Column1 is located.
I need Column1 Sheet1 repeated on Column1 Sheet3 and I need the respective city name from Column2 Sheet2 in Column2 Sheet3. Once I have this I can re-insert it into the master sheet.
The two areas I am trying to learn is if I am to use an If or a Findit, and secondly incorporating the multiple sheets.
I have attached a sample file.
Excel 2007
View 14 Replies
ADVERTISEMENT
Aug 26, 2009
while running the macro, how do you populated cell A1 of a different sheet without first seleting sheet the desired sheet. Example im on sheet 1 and iwant to move a value "TEST" to cell A1 of sheet3?
View 2 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
Mar 19, 2013
Find herewith attached file of xls... for my query..
Test.xlsx
View 14 Replies
View Related
Jan 11, 2010
I am moving data from Sheet2 to Sheet3.
View 5 Replies
View Related
Feb 16, 2008
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
View 9 Replies
View Related
Jul 2, 2014
How can i set the range for the Sheet3 i have taken IngDataColumn. It select only particular column of fixed that is 4
[Code] ....
View 14 Replies
View Related
Jul 2, 2013
I try
With Sheet3
'Sub TF()
Dim i As Long
For i = 1 To Range("A" & Rows.Count).End(xlUp).Row
If Cells(i, 1).Value = 1 And UCase(Cells(i, 2)) = "Y" Then
Range("F1").Value = "GREEN"
End If: Next: End Sub
End With
To allow me to push my macro hotkey while im on sheet1 and have it run the macro thats on sheet3 but it does not work
View 3 Replies
View Related
Jun 6, 2006
I have a workbook that opens to sheet3 and in a cell on that sheet I would like to automatically show the last date entered from column A on sheet1 .
I have some code that shows the address in a message box but I'm so green when it comes to VBA that I don't know (yet) how to redirect the data in that address to a cell on sheet3
Dim LastDate As Range
Set LastDate = Range("A1").End(xlDown).Offset(0, 0)
MsgBox LastDate.Address
View 3 Replies
View Related
Oct 25, 2012
I am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.
following is the VBA code i am using
Sub CopySample()
Dim shSrc As Worksheet
Dim shDst As Worksheet
[Code]....
View 1 Replies
View Related
Jan 28, 2013
I have this macro code in Sheet1 assigned to a button named Combination. I copied the whole sheet twice and moved to end. So they have the same data content and hopefully the macro in sheet1 will work as well in sheets2 and 3. But it's not. I just copied the code from VB codes Excel objects Sheet1 to Sheet2 and Sheet3. The cursor changed to a reading glass but it doesn't display any result. I am sure it's the worksheets(1).range part that needs to be edited but i am not sure if that is simply changing it to worksheets(2) or worksheets(3). I tried that also but no effect also.
Option Explicit
Public Sub ModelPricing_Template()
Dim a As Integer, b As Integer, c As Integer, d As Integer
Dim e As Integer, f As Integer, g As Integer
Worksheets(1).Range("a15:IV65536").ClearContents
[Code] ........
View 5 Replies
View Related
Jun 30, 2009
I have the following formula which returns the number of asset breaks for each head of dept in sheet3 based on their teams in Sheet1 and then does a countif in >30_DAYS_ASSET in sheet2. In sheet 1 is a mapping table with range names "Teams2", "Teams" & "Managers". I now need the formula to also do a count on the unique numbers in sheet2 Column B, if there are duplicate numbers then that will be 1 asset break, so for example for for Joe plummer we can see there are duplicate case numbers so the formula in total should return 2.
=SUMPRODUCT(--ISNUMBER(MATCH(Teams2,INDEX(Teams,MATCH(C11,Managers,0),0),0)),
COUNTIF('>30_DAYS_ASSET'!$B:$B,Teams2))
Sheet1
AB2ManagersTeams3JOE BLOGGSAMP14JOE PLUMMEREQADMIN567Teams28SECADMIN9AMP1
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
Sheet3
AB4Head of DeptASSETS5JOE BLOGGS286JOE PLUMMER3
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
Sheet2
AB6SourceCase No.7SECADMIN4498618SECADMIN4498619SECADMIN44991310AMP144986211AMP144918012AMP1550935
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
View 9 Replies
View Related
Aug 2, 2006
If I have two columns which are lists of names, how do I make a new column which merges the names from each column into one list, and will refresh when new data is added to the two originals.
View 14 Replies
View Related
Dec 13, 2013
I recieve a data file on a monthly basis. Is there a way to take all of the monthly worksheets and combine into one workbook without doing a copy paste every month?
View 1 Replies
View Related
Dec 21, 2007
Hi i need to combine and merge difefrent data into groupings. EXAMPLE
1ax
1bx
1cx
2ax
2bx
2cx
It needs to end up as
1ax
2b
c
With a 2 or 3 empty lines until the next set of data
But if for example i have this:
1ax
1bx
1cx
2ax
2bx
2cz
3 c z......................
View 9 Replies
View Related
Apr 17, 2006
I have a spreadsheet with a name spread over 3 cells
A1 = MR
B1 = JOHN
C1 = SMITH
i want to create a macro or a formula that combines all of the data in these cells into the first column so that in column A1 it would read MR JOHN SMITH.
View 5 Replies
View Related
May 17, 2006
I have set up a control sheet that gathers information over the current week, eg: amount of deliveries and total cost. On the control sheet it gives the amount of deliveries and total like at say A10 and B10, on this same page I have a 52 week colomn that needs to gather this information. Now the problem is a new delivery plan is used each week but the control sheet stays the same, how can I get the data from A10 and B10 to copy to the different lines in the 52 week sheet. Have attached the workbook for reference.
View 2 Replies
View Related
Jan 27, 2010
I need to combine rows with that have the same column A value into one row. The duplication will be no more than 3 (ie 3 As, 2 Bs, 3 Cs, 1 D etc). I am looking for one of two options. 1) Ideally I'd like to be able to take 2 columns and turn them into up to 4 columns total. 2)Alternately, I can format the data to be in the correct columns to start, but will still need to merge the duplicate rows. The data can have any number of rows to start.
I've found something close, but it puts the new column data into ascending number order, which won't work for me because I need it to be in the specific order I input.(It also put all the data into one column, which I don't mind because I can do text to columns, but the order was the bugger.)
View 5 Replies
View Related
Feb 13, 2009
I'm not sure if what I am trying to accomplish is best done using the LOOKUP function. It occurred to me that a table might be the best way to go but I'm not sure exactly how to go about it. The LOOKUP function I am using contains way too many variables and thus has not yet been correct in displaying the proper info.
What I would like to do is create a workbook with a table, say column "A" is the Style/Model product, column "B" would be the pricing information, and column "C" would be the Product Identifier......
View 2 Replies
View Related
Feb 17, 2010
I have about 600 patients' charts, which I audit every 3-6 months. I have created a macro which imports each patient's workbook into a single workbook (one worksheet per patient). Now I'm trying to create a macro which will import each patient's most recent audit results onto one worksheet. Here's how the results are organized:
2/1/2010 Audit 3/1/2010 Audit 4/1/2010 Audit
Y N N/A Y N N/A Y N N/A
x x x
x x x
...etc., with each audit taking up 3 columns and 32 rows. My code, however, is not working,
View 9 Replies
View Related
Jun 29, 2014
I need to combine data from multiple tabs into one tab. I can have up to 5 tabs with data that starts in column B. The number of rows will be different each time.
View 1 Replies
View Related
Jul 26, 2007
would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
View 9 Replies
View Related
Mar 11, 2008
I have multiple sheets within a workbook, where the sheetnames will always be changing.
Inside of these worksheets there is data that will be different, the starting cell of the range is allways the same and the number of columns is constant. The number of rows changes. I need a code that will go to each worksheet, define and copy the range on that sheet and paste it onto a summary sheet, in order.
I would like to collect all the data and put it onto one sheet.
View 9 Replies
View Related
Jan 15, 2009
i just want a macro to run over 4 sheets and combine onto one. I found this code -
Sub masterer()
if sheets(1).name "Master" Then
Sheets.Add before:=Sheets(1)
ActiveSheet.Name = "Master"
end if
For i = 2 To Worksheets.Count
Sheets(i).Columns("A:G").Copy
Cells(1, (i - 2) * 7 + 1).Select
ActiveSheet.Paste
Next
End Sub
This places all data in a line in row 1. Can the code be easily changed so
it puts each line from each worksheet onto a new row. So i have one big list of data ranging from columns A:G
View 9 Replies
View Related
Jan 19, 2010
At the end of every month I receive a sales report from our ERP system setting out sales quantities by Customer ID e.g. ABC001 and Product ID e.g. FB3000. I need to collect the data for each month and gradually build a report for a 12 month period.
My problem is that each monthly report does not include every Customer ID and every Product ID, it only includes cases where sales quantity was > 0. So as each month's data arrives I need to make sure that my report has all necessary Customer ID and Product ID pairs so I am not missing any sales.
View 8 Replies
View Related
Sep 21, 2006
In my sheet I have it search for duplicate records and give those records the same id. Is there anyway to combine data into one record. For example, I have a person with a value in column Points1, on another row a value in column Points2, and another row a value in column Points3. I want take those values from the duplicate records and put them all in one record. I've attached a sample.
View 2 Replies
View Related
Feb 15, 2007
mapping data. Attached is a sample of what I need help with.
I have a Two Worksheets with Data and a third containing the template with which I want the first to to combine into.
The first sheet looks like this:
WWID | YEAR | LITER | MAKE | MODEL | SUBMODEL
The 2nd sheet:
HOUSE_ID | YEAR | LITER | MAKE | MODEL | SUBMODEL | Part_No
I want to map these two sheets together into the 3rd that looks like this
WWID | HOUSE_ID | Part_No
by using the similar data found in the first two sheets (year, liter, make, model, submodel)
I've attached a sample of what I need..
View 4 Replies
View Related
Jul 13, 2012
I have to compare and combine data from multiple files and combine it into 1 master spreadsheet. I have attached a sample file. It is in bulgarian, but the language is of no importance. An example of the file: it contains data about repair maid on a truck. First column is just the number of the repair type and shall be filled upon completion of the table. the second column is the name of the repair itself. the 3rd column is the date the repair was made. the 4th column - the total work hours the repair was made. Some repairs were made more than once and thus the merged cells 3 to 9 in column B. I have 30 trucks which have more or less the same repairs, just a different number of each repair. A sample file of 1 truck is attached, called 1truck.
The master spreadsheet should be of the same type as the example, however showing data for all trucks (from different files) next to each other. (the attached "alltrucks") As you can see there are repairs done only on some trucks, and others are done multiple times. The master sheet should have all possible repairs from all trucks. So far I've been doing it manually, but takes way too much time...
View 1 Replies
View Related
May 16, 2014
I have a series of X-Y Data (0-10 in both axis) that I want to overlay on an area chart to show outliers outside of an accepted condition. I have been able to create the area chart and the scatter chart separately but when I try to combine them the axis gets messed up. I tried using a secondary axis but I am not that skilled
I have attached the data and my feeble attempts at creating this chart.
View 2 Replies
View Related
Sep 28, 2013
I have a time tracker that provides hours that employees clock in and out. It provides me with an excel document with all the employees time every two weeks as needed, however it does not total the hours from all previous spread sheets so that I can have a YTD (year to date) total of the employees hours worked and I need to be able to have this. Currently I am going through each and every spreadsheet and totalling them up. I have over 40 employees and this has become very time consuming to say the least.
View 1 Replies
View Related
