Pull Data By Using New Webbased Query

Mar 4, 2007

I am trying to pull data using New Webbased query. But when I try pasting the link it is promping me that the string is very large.

View 3 Replies


ADVERTISEMENT

Pull Query Results From Access

May 29, 2007

I'm at a stand-still again, as my current task calls for a way to communicate between Access and Excel. I know where the data I want in my Excel workbook is, and there's a query in place to pull it into a table. What I'm trying to do is write a macro that will open that particular table in Access, run the query, select the table, open a particular worksheet in my workbook, and then paste the data in.

This isn't hard to do by hand, besides finding the right database among a mess of others. But I want someone who isn't me to be able to get ahold of the same data by running the macro. It'll make less work for me in the long run.

View 14 Replies View Related

Create An Conection With MS QUERY To A Csv And Query Data

Sep 6, 2008

I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!

View 9 Replies View Related

Pull Until . Found: Pull The Number From The Right Until It Hits The Decimal Sign

Jan 7, 2010

I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698

View 2 Replies View Related

Pull Data From Sheet Based On Criteria - Populate UserForm And Ask For Missing Data

Feb 8, 2014

I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...

First I was using a msgbox function to get the info:

HTML Code: 

For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b

But it can be up to 30 different new employees... and that is time consuming.

I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....

HTML Code: 

Private Sub CloseButton_Click()
Unload UserForm1
End Sub

Private Sub ComboBox1_Change()

[Code] ......

View 2 Replies View Related

Using If Function To Pull Data From One Cell Based On Data From Merged Cells

Jul 24, 2014

Looking for a formula to accomplish the following:

I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".

View 6 Replies View Related

Find Closest Match Data On Worksheet1 And Pull Data From It To Worksheet2

Jan 8, 2013

I have an excel workbook with 2 worksheets. One worksheet shows the MASTER LIST of COMPLETE Customer Names (e.g. ABB Supplies Incorporated). The other worksheet has information on customers but the customer names typed in are incomplete (e.g. ABC Supplies). I need a macro that would look do a comparison of the customer names in the 2nd worksheet to the Master List worksheet and pull the data (complete name, address, etc.) for those that would match (partial match since company name is 2nd worksheet is usually incomplete).

View 2 Replies View Related

Excel 2010 :: Compare Data In Five Sheets And Pull Out Missing Data

Oct 2, 2013

I have one excel 2010 workbook with 5 work sheets, each work sheet contains a list with first/last name(one column) and the company name, some have a 3rd column with their email address in each sheet represents each year starting at 2008 thru to 2013 i have to find out if the people that attended an event in 2008 also attended it in 2009/10/11/12/13 and if they didnt, put their name and company name onto a blank worksheet within the same workbook without using a macro, how can i do this?

View 2 Replies View Related

Excel 2010 :: Access Data Connection Query - Missing Data All Of Sudden

Oct 19, 2012

I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.

btw...I am running Office 2010

View 2 Replies View Related

Data Connection From Web / Web Query Returns Code Instead Of Selected Data Table

May 31, 2014

A web query I am trying to use to bring an online data table into my worksheet is broken. Now, instead of returning the data table nicely into my worksheet, it imports the code of the webpage, instead, and turns my worksheet into a mess.

The query used to work but there was recently an "upgrade" to the program that populates the web table and the query no longer works and just returns the code for the page, instead. I can see the html code for the table in all of the code it returns but I really need the table to import cleanly into excel.

I can't talk to the people who changed the web program.

View 3 Replies View Related

External Web Data Query Fails To Insert Table Data?

Jul 9, 2014

An external data web query points to a web site that offers a foreign exchange rate calculator. In my browser, I selected the specific currency pair I need and used the resulting url in the web query. The "New Web Query" pane resolves the url correctly and allows me to select the table data I want (the little yellow arrow turns to a green check mark). However, when I hit "Import" and select the target cell, the only data returned is the parameters from the url and an error msg (This web query returned no data...). How do I get the query to pass the parameters to the website correctly?

View 3 Replies View Related

Pass Parameter From Excel Through MS Query To MS Access Query

Nov 26, 2012

I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.

I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.

Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.

If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?

Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.

View 3 Replies View Related

Query Parameters Which Takes The Date From The Cell Into The Query

Mar 29, 2007

Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.

My query is this
WEB
1
http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12

Selection=15
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False

View 2 Replies View Related

Data Extraction (pull The Data To Another Sheet For Each Line)

Feb 23, 2010

I want to pull data from another sheet, however there are multiple listings of each and I want to pull the data to another sheet for each line. I maybe easier if I try and show below:

Col. ACol. BCol. C
Smith101
Jones512
Green65
Black1214
Smith 3612
Jones1512
Dual25
Green1225

I want to pull this data for each name in Col. A in to another sheet. I've tried "IF", "Vlookup" and a couple of others, it just seems to be hitting the first option and pulling the data but not the ones below.

So if I selected Green on the second tab it brings through the "6" and "5", but not informtion from the listing from Green below. So I wiould like to list all the Green's, and the applicable data.

View 4 Replies View Related

Use Data Validation That Will Pull Data From A Source List

Jan 12, 2010

Is there a way to use Data Validation that will pull data from a source list and also be able to type in additional data or just new data in same cell?

View 3 Replies View Related

Get Pivot Data: Pull Out The Data From The First Column(A), And Then Average

May 31, 2006

I have a Pivot Table, with lots of data in, what I want to be able to do is on a separate sheet pull out the data from the first column(A), and then average out the figures from Columns(B-E).

When this has been done on the sheet (with the average data) in the next column, I then want to use Column(F) (from Pivot Table), and do a simple sum to work out 5% of the difference if it is greater than ZERO between Average Column and Column(F) (from pivot Table) Column(F) must be higher than the average in order to work out the 5%.

View 3 Replies View Related

Match Numeric Data With Query Text Data

Oct 2, 2007

I have some code that goes through some data that is imported from a database via a query.
This has been working for a few years without a problem.

I lookup and employee number on my sheet to the employee number in the database table.

this is my code that checks the employee number.

Set rs = Worksheets("Employee")
If rs. Cells(r, 2) = cells(1,1) Then 'if employee number matches
......

The problem is that now the database application has adapted an alpha option (it used to be numeric only). In order for my code to work I have to change the employee number on my sheet by putting a ' in front of it.

Example if the number was 127 I need to enter '127 in the cells.

I have a few thousand in my data.

Can I add some code to my macro so I can still enter just the number in the cells?

View 4 Replies View Related

How To Pull Out All Data From A Row

Feb 10, 2009

Is there a way to pull out all of the data from a row and place it into a cell out to the right of the range?

Some of the data is text and some of it is dates.

My problem is that it is a big spread sheet and the data is scattered in the sheet. Not uniform at all.

View 9 Replies View Related

Pull Out The Data In The DATA TABLE Sheet

Mar 11, 2009

I've been playing around with VLOOPUP, MATCH, SUMPRODUCT... But I can't seem to get this one right..

See the attached Excel file..

I think it should be fairly explanatory.. I want to use the dates in SUMMARY sheet, to pull out the data in the DATA TABLE sheet. The numbers in Column A on the DATA TABLE sheet, is first date in each month, and the numbers represent the day of the month.. .

Example:
01.01.2009
1
2
3
4
5
..
30

01.02.2009

View 5 Replies View Related

Pull Out Data From A Listing

Apr 15, 2014

I don't know if this will require a macro or maybe a function of excel, but I have a large listing about 1000 row in spreadsheet. Each row correspond to a unique customer. But I will have to extract only the customer that I am looking for, which is about 30 of the 1000. The cell A1 is the customer # which will be use as reference, so I have about 30 customer # to pull out from that listing. Which will be the greatest method to do so?

Example:
A1 44334 ERIK JOHNSON 60$
A2 34555 KARIM EDWARD 50$
A3 32555 EDWARD CHRIS 65$
A4 55666 STEPH LAWRAW 45$
...
I want to pull 44334 and 55666 the whole row.

View 8 Replies View Related

Pull Data From One Sheet To Another

Mar 11, 2014

I am trying to get the starting point for this new sheet going but I am not able to formulate the required code. I will explain what I want to do

In the attached sheet, I have three tabs

Over 20K
Under 20K
PartNumList

This is what I want to do...In PartNumList tab if Annual Rev (Col O) is less than 20K then value in Col (A) i.e Part Number should be copied and pasted in Under20K tab... it has to pasted in either B18, B24,B30,B36, if B18 is populated then B24 if that too is populated then B36 and so on..

I want to do that same for Over 20K but if I have a starting point for Under 20K I can work on it offline too..

View 5 Replies View Related

To Pull Some Data From One Sheet Into Another

May 1, 2007

I need to pull some data from one sheet into another. Here is an example of what I am trying to do if anybody know hows to do this? I need a formula that will look in sheet 1 look at the idnumber, match it with the idnumber in sheet 2 ande fill in the serial.

sheet1
idnumber serial number
12345 66181
12346 66182
12347 66183

sheet2
idnumber serial number
12345 insert serial number here
12346
12347

View 9 Replies View Related

Macro To Pull Data From Web?

Oct 18, 2004

I want to create a macro that will automatically pull data from the web by simply pressing a macro button. I assume that this would be an easy task if the data is from a website with a specific URL such as [URL]

However, there are times when someone must enter data into the web to pull a specific report that does not have a unique URL. Is there anyway to create data fields in excel that would allow an individual to type in specific information (name, report period, etc.), and then press a macro button that would go out to the web, enter the information automatically, and export it as an excel file. I realize that this is probably substatially more difficult than my first question.

View 9 Replies View Related

Pull Data From One Sheet To Another

Dec 16, 2011

How to pull data from one sheet to another. I have 2 sheets Sheet 1 and Sheet 2. I have data in cell A1 in sheet 1 and i need that same information onto sheet 2 in cell C10. I know on sheet 2 cell C10 i can type in this formula ='Sheet1 '!A1 and it works great.

The problem i'm having is if i clear sheet 1 data it is also clearing out the data in sheet 2, the formula remains but the data is gone. I need that data to remain on sheet 2. Is their a way to do this?

View 2 Replies View Related

Pull Data From Another File

Dec 8, 2008

Basically what I want to do is pull data from another file and have it copy it down about 10 lines onto another file. With a seperate sheet for each vehicle. For example:

File 1: Has 2 columns with data

Vehicle Number 1000 Vehicle Type Ford
1001 Chevy
1002 Dodge

File 2: Has a vehicle log sheet, in which i want it to take the data above and copy it down x amount of lines.

Vehicle sheet | Date issued | Hours used

Vehicle Number| (data from file one here) | Vehicle Type (data from other column in file one here)

And have it copy itself down from like A1 to whatever.

These also have to be on seperate sheets within the workspace, and each "tab" be named after the vehicle number,

View 9 Replies View Related

How Do I Pull Drive Data

Apr 9, 2009

I am trying to get a excel to list all the file names in a drive along with date last modified, author and file size. I have got the following bit of code to pull back the file names, but i am struggling to find anything that will pull back the other data, I think its something to do with the DIR function, but im not sure........

Range("B1").Select
D = ActiveCell
Cells(2, 1) = "Filenames"
r = 3
f = Dir(D, 7)
Do While f ""
Cells(r, 1) = f
r = r + 1
f = Dir
Loop
End Sub

where "B1" is the file path of the drive

View 9 Replies View Related

Pull Data Into Workbook

Sep 27, 2007

I have a workbook I created that is full of macros, graphs, and formulas. Five of the tabs in the workbook are where I will be putting my data. This workbook will also be used by others that don't even know what a macro is or does so I need to make this as simple as possible. How I get my data:

I have a website on my intranet where I have to login and then I have five templates that I run. I can have the results given to me either in HTML or in an excel spreadsheet. The excel results are very basic. Heading for each column and the data below. I have the report generated with blank columns since my page the data will go on has formulas. Thus far I have been copying all rows starting with row2 and doing a paste special (values, skip blanks). I had a macro in my personal.xls file to do this for me but most users will not know how to import it so I need a resolution that will be saved in the WB I send out.

View 5 Replies View Related

Edit Web Query - Get Data From Web

May 10, 2014

i have a worksheet that gets data from web - its automated, but the website goes through a tunnel - with security - requires username and password

the Query Runs ok and smooth but i have to login manually by right clicking on a table where the query is and selecting "Edit Query" so i can login, excel vba doesnt save passwords for that part...

one way i find it possible to automate that part too would be to use maybe like the sendkeys statement to pop up the context menu from right clicking the mouse button, or like the options button on the keyboard.

I found this one:

[Code] .....

It works but the context menu comes exactly from where the current mouse position is..

I needed it to do the right click on a specific range in the worksheet (where the web query is)..

View 8 Replies View Related

Pulling Data From Web Without Web Query

Mar 5, 2010

information from a website that does not allow web queries (or at least from Excel 2003).

I have to pull the latest data every Wednesday from this webpage: [url]

To make things even more complicated the name of the page changes every week as well (corresponding to the date).

View 9 Replies View Related

Vba To Pull Column Data Into Userform?

Apr 3, 2014

I got it when I click on the cell it loads the userform but it is populating with row data instead of column data.

I would like when I click on for example cell T4 and the userform pops up to see the textbox data going down the rows instead of across which is is currently doing.

so clicking on T4 brings my userform up filled in with information from

T5 and U5
T6 U6
T7 U7
T8 U8
T9 U9

I have when I click on the cell T4 column

label amount receipt

electricity 384.00 ZgHl2V

This way I can change amount or receipt and update my worksheet.

VB:
Private Sub UserForm_Activate()
Dim r As Long
r = ActiveCell.Row

[Code].....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved