On another sheet (I left the sheet names out of the formula to make it easier to read) with C2 as the matching Col F value and it will return the most recent date, May 19th, not the most recent date with a value in Col K, May 18th. The report itself is thousand of lines long and has a couple hundred unique values for Col F.
I have the following worksheet (see attached). What I would like to do with it to create a report is as follows:
1. Create separate reports for each estimator (KM, JW, WH) 2. Carry over the information in Columns I, A, B & H 3. Each report will filter column I to leave out COMPLETED and just report the number of days remaining is ascending order. 4. Flag data if the days remaining is <=5 5. Generate an email to send out notification of 5 days remaining 6. New report can be generated on any given day
i have a sheet that i have been creating to pull information based on two things. The criteria is an emplyee # and the second is a date.
The data needs to be organized onto Sheet4. The Employee # will already be on Sheet4, so i have been trying to use that with Vlookup / hlookup with no success as i can't seem to get it to find the correct Date and place the data correctly.
Sheet4 layout: Completed (with respective data from Sheet2)
A B C D E
1
[code]....
the data is located in Sheet2 (Emplyoee # is always in Column A, and the Date is always in Column B).
the data needs to be pulled into Sheet4. Essentially making the horizontal data of Sheet2, Vertical on Sheet4 under the respective date column.
So I am trying to rearrange some cells on a report based of some criteria using an IF formula and getting Blank cells. Here's what I have:
LastRow = Range("A" & Rows.Count).End(xlUp) With Range("P2:P" & LastRow) Formula = "=IF($F2=""/FEDERAL EXCISE TAX"",$I2,"""")" .Value = .Value
[Code].....
So I just want it to identify whats in a cell and populate a related value if the text is present. Do I need to change formatting to find Tex or something along those lines?
I'm trying to use DGET to pull coordinate pairs from a list and match them up to a label based on certain criteria. I can't seem to get it to work. I'm also thinking that the way I have it set up, the coordinate pairs might not stay together and that has to be the case. My criteria is multiple cell based too and I don't think DGET can handle that.
For example, In order for a coordinate pair to be labeled "B" the x coordinate must satisfy a condition and the y coordinate must satisfy a different condition. Can I use DGET with the AND function?
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student Math Reading Science
Jimmy 75 84 100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name =Data!$A2
Math =Data!$B2
Reading =Data!$C2
Science =Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.
I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):
This would be the data on sheet 1:
Name Bonus Commision
Tom $45 $50 Mary $25 $75 Mary $30 $80 Tom $60 $50 Tom $90 $25
What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:
Tom's Sheet:
Tom $45 $50 Tom $60 $50 Tom $90 $25
Mary's Sheet:
Mary $25 $75 Mary $30 $80
I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.
Is this possible to do in Excel without using a macro?
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:Â
For Each b In myrange If Application.IsNA(b.Value) Then Employee = b.Offset(0, -2).Value SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found") b.Value = SSID End If Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:Â
Private Sub CloseButton_Click() Unload UserForm1 End Sub
Right to the point. I got two sheets in my file, one named "Order" and one named "Input". In the input sheet there is costs & revenues divided into several different divisions/activities. In column A I got the name of the cost/revenue and then the value for every period Jan-Dec in columns B-K. And the name of the activity is in column A under the cost/revenus for that activity, like a " SUM" row. Now, in the the "order" sheet, you can select a specific activity from a rolllist and then I want that activity's revenues & cost to be shown. I've attached the file to make it easier for you guys to understand my needs. I think I need some sort of 2 criteria VLOOKUP, that is first search för the correct division, once this is found search for the different costs & revenues and the return a value. But I'm not so good at this so I can't get it to work. Maybe the INDEX function is good here but I don't get that at all. I tried Daves "2 criteria Vlookup" but all I get is #ERROR.
I have a large list of items (up to 3000) that are listed by category, description, part number and weight in columns C-F. Column A is where a user will enter a quantity in the rows of the items that they want. Once the user is done picking their items they hit a button that I have written a macro in, to copy and paste only the rows that contain a quantity in, on to another sheet. My problem is that for these items (that contain a quantity) I need to have a line number (in column B) that starts at 1 and counts up for each line item. Issues to consider:
-Line item 1 may not always be the top item. (because the user may not choose the top item) -There will be spaces inbetween the line items since the user may not pick all of their chosen items in order. -Users can pick an item at the bottom then pick one above it. (The Line item numbers will need to readjust to include the new number in the middle)
This has been bugging for a few days now cause whenever I think I finally get it I keep creating circular references
I have a 7-column 'Task' list that I need to query, and extract (preferably to a separate sheet) only those tasks that start 'ON' or 'BEFORE' the queried Date (or date range), AND/OR end 'ON' or 'AFTER' that date.
Column 1 = Dates Columns 2-4 = Task IDs (ID1, ID2, ID3 - must match as a group) Column 5 = indicates either Start or End of Task ('S' or 'E') (each Task has 2 such listings - a Start [s] and an End [E]) columns 6 & 7 = Misc. & Notes (unimportant as identifiers)
So, if a Task (identified collectively by col. 2-4) starts On or Before and ends On or After (col 5) the date (col 1) queried, then that Task should be included in the results list. The tricky thing is that a task that starts long before the queried date and/or ends long after the queried date needs to be included in the results list - therefore 'S' and 'E' (Start/End, col 5) and the 3 Task ID (col. 2-4) must be used along with the date for the query. And, if a task starts (or ends) on the queried date, then its counterpart (S/E) should also be included in the results list (if available).
I am trying out a new spreadsheet to log my cycling. I have attached the example so far. I am going to have a form appear and fill it out. Upon clicking 'Add' button I want a macro that will search column B (a list of dates) and match the date the users filled out on the form with the spreadsheet and then paste the corresponding form data in that row.
How would I accomplish this? Does the formatting of the date field complicate this since on the spreadsheet I display "Saturday 1/08" and on the form the user enters in "01/08/2008"
I have a 5 column LIST that will have new rows added daily. Column A= Date (mm/dd/yy), B=id (s or u), C= ArriveTime (hh:mm), D=DepartTime (hh:mm). E is Delay time (D-C). Arrival and Departure times will vary from 5 AM - 9 PM but will always be on the same day. I would like a count of all s with delay of 0-6 min, 7-12 min, 13-18 min, 19-24 min and 25+ minutes. Also count all u with same delays. I should get 10 results (1 of each) using the following data. Would also like the mean, median, mode, min & max for all C (Arrival), D (Depart) and E (Delay) times.
1/1/08 s 08:00 08:01 1 1/1/08 s 08:00 08:07 7 1/1/08 s 08:00 08:13 13 1/1/08 s 08:00 08:19 19 1/1/08 s 08:00 08:25 25 1/1/08 u 08:30 08:31 1 1/1/08 u 08:30 08:37 7 1/1/08 u 08:30 08:43 13 1/1/08 u 08:30 08:49 19 1/1/08 u 08:30 08:55 25
I currently have a report with so many large array formulas that it is virtually unusable. I want to use the DSUM formula in place of my array formulas but I am vexed in regards to creating a DSUM formula that I can put in the top-left cell of my report and then copy down to the bottom right side of my report. Currently, the array-formulas sum data from a large list when it meets two criteria -- one part of the data-record in the list must match the row label of the current row in the report and another part of the data-record in the list must match the column label in the current column of the report. I have found with the DSUM formula that you can use a "formula" criteria in place of a static criteria...the problem I am having is that the part of the formula that points to the data-set must be relative while the part that points to the formulas criteria needs to be static -- in order to be able to make one DSUM formula and copy it down and over I would need my formula criteria to have the opposite setup (with the data-set part static and the formula criteria as relative).
I would like to pull all rows and columns from a table and copy them to a separate sheet. I would like to pull the data if a certain value is present in a particular column. Essentially, it is the same effect of filtering the data but I don't want to have to keep filtering and copying specific cells and pasting them into a different sheet if I need to change the raw data.
Example: I would like to copy all ids, store, and partner information IF the partner is "X". I would like to put this information in Sheet A.
I've got a forecast from a customer and need to summarize it with part number, quantity and date.
The spreadsheet is part no in column a due dates in row 1 values at the intersection of part no and due date and i don't want 0 quantity to report back.
I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.
So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).
The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14
I have two tables (Table 1 and Table 2). Table 1 has names of all employees in my organization ('Name' column) and corresponding information in the second column ('Textinfo'). I need to create Table 3 from table 1, but only select those employees who are in my team, ie matching names in the Table 2. I also need to extract corresponding 'Textingo' column information. I tried vlookup but it did not work because if there more that one name in the table 1, vlookup confuses it (i think). Would you know what function or code to use?
I'm trying to fix a report that I created but can't seem to figure out a way to display the information for a single student.
I've attached a mock report up so that maybe it would make more sense.
So the first tab, 'DIR', I managed to find a way to pull up only the information for a single student that was selected in the drop-down D1 cell. For that I used a simple INDEX/MATCH combo. The student's name would only appear once in the 'Paste DIR' tab, so it was fairly simple to create these formulas.
Now for the 'Paste Outreach' tab, a student appears multiple times in the chunk of information. Right now, the way that I have the report is so that it would just pull the information from each row, regardless of the student. What I would like to do is find a formula similar to INDEX/MATCH, but find every instance when the criteria is met for the INDEX/MATCH. I would like to be able to log each instance a student has an Outreach log entered. Then if I switch the student selected in D1 of the DIR tab, then it would only populate their Outreach Logs.
So if Student Name & Outreach # matches D1 ('DIR' tab) & "90" in "Paste Outreach, then pull row info into rows 7-11 in Outreach. Find the next instance Name & # matches, and pull that into rows 12-16, etc.
So I've got a vertical list of dates in M/D/YYYY format, and I'm trying to come up with a method to pull certain dates that are greater than a given benchmark and paste those values in another column. For instance, if I've got a list with 3/3/2008, 5/5/2010, 6/6/2011, and 7/7/2012 I want to pull only the dates beyond 12/31/2010 (so would be the 6/6 and 7/7 ones).
I'm assuming this isn't doable with one formula, so I would need a macro. But I'm having trouble just even coming up with the logical operator for just one date. I must be doing something wrong here. If my date in B2 is 1/1/2009 and I have a formula as IF(B2>12/31/2009,"True","False"), I just get TRUE, which shouldn't be the case.
I have two worksheets. Worksheet1 has material number and plant number. Worksheet2 only has material number (along with other columns of info). What I am looking to do is look at worksheet2, find the corresponding material number on worksheet 1 and populate worksheet3 with all the info from worksheet1 and worksheet2.
Now this gets tricky for me because worksheet1 has duplicate material numbers, because there are duplicate plant numbers. I need worksheet3 to produce a row that contains all plant numbers, the corresponding material numbers and the rest of the columns from worksheet2.
I'm looking for the same thing, this great macro by Leith Ross looks for the word "buy" in kolom A starting at A2. Now this all works fine until i change the value of the colum into a if statement : =IF(C2>0;"buy";"NR"). See the attachment on what i mean. If i run the macro now i get error 91 : objectvariable or blockvariable With is not set.
I can work around it, if i hardcode the A2 with "buy" and then A3 etc with the if statement i works for some strange reason. But there must be a smarter way of doing it, that's why i came here .
I am trying to COUNTIF some data from a spreadsheet I have, where they have been entered after a certain date (which is part of the information). The problem I am having is that I am trying to enter the date I want as a variable in another field so that it can update the rest of the table.
Basically I have a field where it says "Calculate new business since" and then a date should be entered - in turn the formulas should make the calculations based on that date. Is this not possible?
I would like to calculate the sum of investments based on their expiry date and have the totals per month (and year). I have a table that looks like:
TermInterest rateMaturityBalance 24 Months7.12%11 November 200740,000.00 12 Months7.74%13 November 200750,000.00 24 Months7.05%10 January 200853,889.12 12 Months7.85%11 January 2008120,000.00 12 Months8.02%22 March 200817,000.00 36 Months6.68%30 June 200832,000.00
I'd like to have something like:
Nov 07 90,000.00 Dec 07 0.00 Jan 08 173889.12 and so on...
Admittedly I am an Excel novice, so excuse me if my question is dumb and has a simple answer (actually I hope it has :-) but I have tried to find a solution by searching forums, my books, online help, I tried my luck with sumif and SUMPRODUCT functions, even used the conditional sum wizard, but I can't get it right
I have 2 sheet in MS Excel (MATTER & REPORT) . Database included at sheet MATTER. Report will be seen on sheet REPORT based on entry date. What formula used to produce report automatically.
I am looking for code that can generate the report that a user selects.
For example the user clicks reports on the userform. The report userform opens up. The user checks the monthly report button and enters the last day of the month he wishes the report to be for. i.e 7/31/2010 and then clicks generate report. when executed excel creates a new workbook and creates two sheets. the first looks exactly like the master data sheet from the original worksheet but of course with the specified data. the second sheet will populate a summary of the data. I will address that after i figure out how to get the first sheet compiled.
I need to create a report based on three columns. I have explained in detail about my requirement in the attached sample workbook.
I hope someone will help me to solve the problem through VBA because the items & expenses may vary at times. Hence, I feel a Macro will be the best solution.
I can generate from my hotel software a list that includes the check in and checkout date for a room- and the number of nights for the stay, and the total dollar amount of that stay. if anyone is willing to look what I have so far, I am attaching the smallest sample set of data I can generate and have it useful and I have succeded in using vlookup succesfully to transfer the net room amount onto the first night of each stay on the grid.
worksheet "export tape chart" is the data generated by my hotel software- (except for Col a-- I use this for my two way vlookup match) I can reorder the output as needed for vlookups & offsets
worksheet "first night rate total NA" is where I have pulled the total room rate into the first night of the stay in a grid
worksheet "first night rate total clean" is just a simple cleanup of the first pulling for iserror.........
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
