Pulling And Matching Data From Multiple Sheets?
Aug 7, 2013
I have a workbook with 4 sheets one is called final and the other 3 are data1, data2, and data3. The data sheets have the actual data I am needing to pull from. Each has two rows of data: data1 has employee number in column A and employee code in column B. Data2 has employee code in column A and employee name in column B. Data3 has employee name in column A and employee email in column B. Now I need to pull the info form all three sheets into the sheet names final. So the final sheet needs to contain 4 columns for employee number, employee code, employee name, and employee email. The kicker is the data sheets don't line up with each other within each sheet it does but the first one in data1 is not the first in data3 and so on.
View 2 Replies
ADVERTISEMENT
Feb 13, 2009
I am creating a spreadsheet for mutiple clients, which has around 5 columns. This spreadsheet will have 7 sheets on it. 1 sheet for each client, and the 7th will be to display all of the information together.
Basically I am looking to find out if this is possible?
I will try and explain a bit more, as above is just beifly what I am loking for.
I Have Client.xls
On my Tabs I have
Client1, Client2, Client3, Client4, Client5, Client6, All Clients
In Each individual spreadsheet, I have the following Columns
Incident Reference; Description; PMDB number
Each Day data will be entered into each client sheet, and I would like this information to be populated into the All Clients Tab. I am not sure if this is possible, and if it is, would I then be able to put it into the All Clients tab, and have it auto sort by the incdient reference column? As this is an autogenerated reference for all of our clients.
View 9 Replies
View Related
Jun 16, 2014
I've already entered a variation of the formula below into 180 different columns. The only variation is where worksheet 322 is referenced. Each column references a different worksheet.
Formula:
I have at least four other tables to build of the same size, and they're each going to use this same formula with an additional IF formula housed around it. Ideally I would be able to copy the table, then run find/replace, where I could substitute = with =IF(new formula, and then run find/replace a second time and sub ))) with ))),more new formula). The problem of course is in between those steps lies a formula error preventing me from running the second step. The only alternative I can think of is to build the new formula, copy it into a word document, and run find/replace 180 times to tailor the formula for each column. That's what I did to build the first table.
View 8 Replies
View Related
Apr 25, 2007
I am trying to write a macro that will select all cells on a sheet from a2 until the last cell with data. (The last column will be column k but not all columns are completly filled. And I need all the data from the page copied.) Then paste that info onto the first sheet. Then go to another sheet do the same thing except paste it in the first open cell on the first sheet.
Then take all the data from the first sheet of different files into one seperate file.
View 9 Replies
View Related
May 17, 2013
I have a file which has a number of sheets each relating to a different project. Each project has a line for each milestone starting at the same row but each project has a different number of milestones.
I would like to create a summary sheet that either pulls through each row relating to a milestone from each project sheet or ideally each milestone that relates to a certain month from each project sheet (each milestone includes a completion date).
View 3 Replies
View Related
Mar 29, 2014
I am creating an excel workbook for my consignment store to keep track of sales for the store as well as the consignors. I have a sheet for each day of the month, and in the sheets I have it to where I can select the consignor from a drop down box. I am trying to create a sheet at the end of the workbook that would allow me to use the drop-down list to select a consignor and have it pull the sales for the month onto that sheet, an end of the month summary of sales. I don't mind creating a formula for each day. IM taking my time on this to make it work the way I want it to. But I cannot figure out how to make it reference that through the drop down box. Consignors name may not be in the same spot each day and might not have sales for that day.
At first I was thinking an IF formula, but how to do an IF for a range of cells from one sheet and have it pull the sales from that same sheet.
View 6 Replies
View Related
Oct 4, 2013
How to pull data based on column B to individual tabs.
I have the following data:
A B C D
Jane Doe | L1 | 20% | High
John Doe | L2 | 15% | Medium
Mike Smith | L1 | 60% | Low
Marie Smith | L4 | 10% | Low
I want to have the first tab/spreadsheet only pull records that have L1 values for column B
In the next tab/spreadsheet I want to pull records that have L2 values in column B etc.
What formula can I write that will pull all L1 records (A.B.C.D) in to Tab 1, then all L2 records (A,B,C,D) into the next tab?
View 10 Replies
View Related
Jul 25, 2014
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
View 2 Replies
View Related
Nov 16, 2011
I have one workbook in that 6 sheets have.
Here I want match the total one sheet to another but each sheet there is no fixed ranges so that I have confused.
How to find out Each sheet total and match each other.
View 3 Replies
View Related
Jun 14, 2008
I'm working with 2 sheets. Both have the same headings, A1 is CustomerCode, C1 is JAN, D1 is FEB and so on. The CustomerCode column doesn't match exactly between the 2 sheets, because some of the customers from Sheet1 aren't listed on Sheet2. I need a formula to put on Sheet 3 that will Sum the values in JAN, FEB, etc from the first 2 sheets for matching customers, and also bring over the totals from the customers on Sheet 1 that don't have a match on Sheet 2.
I have attached an example of how the finished product would look in my case. But also, here's this:
Sheet1 Charges
CustomerCode JAN FEB
ABC 30 25
AEF 20 15
BBB 50 30
CED 15 20
Sheet2 Misc Charges
CustomerCode JANFEB
ABC 510
BBB 3 8
CED 2 4
Need Sheet3 To look Like this:
Sheet3 Total Charges
CustomerCode JANFEB
ABC 3535
AEF 2015
BBB 5338
CED 1724
New customers are added often, so I have a SQL Query that I can put in column A of sheet3 that will pull the same CustomerCode list as sheet1, so getting the names to sheet3 shouldn't be an issue.
View 3 Replies
View Related
Dec 11, 2013
Following Excel task I am trying to complete:
I have an Excel file with multiple sheets and I want to find and replace matching cell data on the same row across all of the sheets. For example, I have two columns, Column A and Column C and 10 sheets. I want to only replace the content in Column A if text matches both Column A and Column C on the same row. So, I want to be able to search for the following data across all sheets:
Column A = "car"
Column C = "yellow"
If both "car" and "yellow" are found in Column A and Column C on the same row, then replace "car" in Column A with "truck".
Is there a way to do this automatically as I have few hundred to find and replace?
View 5 Replies
View Related
Dec 8, 2009
I have a folder which contains a number of Workbooks which were all built using the same template, therefore the layout and formatting is identical in each one. Cells A1:B15 of these workbooks contain information which I am attempting to extract.
I have been asked to build a worksheet with two cells for user's input. The first cell is the 'Directory location cell' and the second cell is the 'Policy Number Cell.' The policy number is found in Cell A2 of every workbook.
The idea in mind is that the user inputs the directory location in the first cell, the policy number they are searching for in the second cell and then excecutes the macro. The Sheet would then return all of the valuable information from whichever workbook contained it.
I think I need to compose a macro which trawls through the folder specified in the 'Directory Cell,' opened every xls until it found the policy number which matched the value in the 'Policy Number Cell' and then returned the cells A1:B15 into the new Sheet.
View 14 Replies
View Related
Jun 3, 2013
I am trying to use the following formula to pull out data from multiple excel files in a folder called "Certificate".
='D:SSR Sec and Techcertificate[STUDENT 2.xlsx]Student Record'!$B$10
='D:SSR Sec and TechcertificatePath
[STUDENT 2.xlsx] File Name
Student Record'!$B$10 Sheet name and Cell reference
The formula works without any problem. I want to replicate the formula to extract the same data in multiple excel files. In this case only the second part of the formula needs to change to "STUDENT 3", "STUDENT 4", "STUDENT 5" and so on. I have created a column in excel with those values. I am trying to use the cell contents in the above "formula", but I cannot seem to replace this value in the formula. Needless to mention that I tried to drag the formula, but it does not work. I am attaching the two excel files.
View 3 Replies
View Related
May 22, 2014
Basically, I run a DJ Management company, arranging bookings for 6 artists. What I'm trying to do, is have data be auto populated from the Master sheet, into separate sheets. The aim, is to create 1 master with ALL the dates for the month in, and the each of the separate sheets to only populate data relating to that artist.
For example!
Artist
Event
Location
Fee
Date
Tony
Tomorrowland
Boom, Belgium
5,000
01/05
[code]....
Now, I need to send the artists their individual schedules for the month, but I do not want to copy and paste individual rows to their new sheets as this is a pain. I know i can sort by artist and copy it easier, but really i just want to put in the info once and not multiple times.
So the master is sheet 1, on sheets 2,3,4,5,6,7 (each one assigned to a particular artist) i need the artists gigs for that month.
View 1 Replies
View Related
Sep 19, 2012
I am trying to combine the data in two sheets.
In Row A sheet one, I have "name" In Row A sheet two, I also have "name"
If row A sheet two matches the data in row A sheet one, I want the corresponding data in row D sheet two to move to row E sheet one.
View 1 Replies
View Related
Aug 13, 2012
Have a worksheet Pricelist, require to pull data from the columns to a new worksheet only if qty is more than 0, and delete empty rows afterwards. Required result is in worksheet order. Original file is about 10K rows.
Attached sample file : example.xls
View 3 Replies
View Related
Feb 26, 2013
I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments
My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?
View 2 Replies
View Related
May 15, 2006
I have an identical worksheet for all the days of the month - i.e. the May workbook has 30 identical worksheets. I am wanting to pull only certain rows from each worksheet onto a master. Something like - copy row from all worksheets where that rows cell "D" has any value other than " ".
I have used the following macro to pull all the data from every sheet onto a master - but i don't want all the data - just the qualifying data.
Sub Combine()
Dim J As Integer
On Error Resume Next
Sheets(1).Select
Worksheets.Add ' add a sheet in first place
Sheets(1).Name = "ALL"
I am not sure what the range "A1" is - i am thinking i can modify it to only grab certain rows.
View 9 Replies
View Related
Jul 10, 2014
is it possible to provide a formula to match as per the uploaded file. Data in Sheet one columns A and B, compared to what is in Sheet two column A I have a lot of data, and only need a Y for yes, and N for No as a result.
View 3 Replies
View Related
Apr 18, 2008
I am trying to find a way of comparing entries in one spreadsheet to another spreadsheet and generating a third sheet of those that do not match.
As an example, I have a spreadsheet of approved supplyers, with name, reference and date in each column, and a speadsheet of used supplyers, some with references and some without. I want to compare the supplyers used to the approved supplyers list by reference number (which are in the same format), and produce a third sheet listing all those that do NOT match e.g. unapproved supplyers.
I need to make sure that the third spreadsheet only lists each seperate supplyer once, even though they may have been used several times, AND it must also include supplyers without a reference number.
I will use this to compare many spreadsheets with the same data, but of varying length and would like to use a macro to perform this function.
View 6 Replies
View Related
Aug 30, 2012
I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
View 2 Replies
View Related
Jan 17, 2014
I'm not sure if this is best handled in the Formulas & Functions section or elsewhere, but this is my best guess. I have a spreadsheet used for tracking hardware issues with data in two worksheets:
1. PageCount
Column 1: Date
Column 2: Serial#
Column 3: PageCount
2. Tickets
Column 1: Date
Column 2: Serial#
Column 3: TicketNumber
What I'm trying to do is find a way to extract from those two sheets the date, serial number, page count, and ticket number where the date / serial # are the same and dump this to a new sheet. I've thought that I may need to concatenate the date / serial number together into a single cell or something, but I'm really at a loss as to how to pull this data. Part of me thinks this should be done in SQL, not a spreadsheet, but that's how our reports are produced.
View 1 Replies
View Related
Jul 16, 2009
If the name in Column F of "Sheet1" is found in "DataPEs" in Column B, then copy the block of 6 cells of data below it in column Q to column D of "Sheet1" in their relative rows. Additionally, if column Q has data then copy it, if not then copy the data only in column M. Finally, the number of matching names will vary in Sheet1 but will stay mostly the same in the DataPEs sheet. I've highlighted one block of data in green as an example.
View 13 Replies
View Related
Jan 8, 2008
Does anybody have a code snippet to search and compare 2 sheets.
I want to read the value in a cell on the first sheet, then search the entire second sheet for a match, if it does match then copy the value from certain cells on the second sheet to the row on the first.
View 8 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
Mar 14, 2012
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1
Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2
View 3 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Apr 1, 2014
I am trying to tie two worksheets together. If text found in one cell in sheet1, make the same cell on sheet2 different color.*
There is a catch... no formula can occupy the cell in sheet2.*
My question is, is there a way of have a formula in completely different cell that will eventually fill the cell on sheet2 with proper information?
To explain a little better, I am trying to tie the sheets together, same cells and everything so when information gets put inside the cell on sheet1 the same cell on sheet2 will change color or display different information, and vice versa. That is the reason no formulas can occupy those cells.
View 5 Replies
View Related
Jun 20, 2012
I have code that runs through multiple arrays trying to match data to items in the arrays and it takes a long time to run.
Code:
dim a as long
dim b as long
dim c as long
dim d as long
dim e as long
dim MyAarray as variant
[Code] ..........
That's basically what the code does. however, it takes an extremely long time to get through with everything as each array increases in size.
View 7 Replies
View Related
May 18, 2006
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies
View Related
