Repeat Column Of Data Down A Row Using A Formula?
Jun 9, 2014
I'm trying to create a formula (if possible) that will repeat column headers down a row and repeat every nth time. I have text values in cells E6:AL6 and would like to use a formula that will make it so that E6 will show up B2, F6 will show up in B3, G6 will show up in B4, etc. And then when it gets to B35 (AL6), B36 will then revert back to E6, and the loop will continue - B37 will be F6, B38 will be G6, etc.
My thought is to create an offset/address of some sort that will read as OFFSET(E6,0,x+1) and if x>35, start back at 0. However, I don't think you can create such a formula using an offset?
View 5 Replies
ADVERTISEMENT
Oct 28, 2008
I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 Replies
View Related
Aug 10, 2013
I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
View 6 Replies
View Related
Apr 9, 2014
how to make conditional formatting for border line (top & bottom) after repeat 5 data/text ....
it's possible with CF formula and do not vba?
see my excel file attached..
View 4 Replies
View Related
Mar 25, 2014
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
View 4 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Apr 24, 2014
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
View 6 Replies
View Related
Dec 15, 2008
How do I keep repeating
If Range("E22").Value Range("G3").Value Then
Rows("22:22").Select
Selection.Delete Shift:=xlUp
Until E22 does = G3
Then I need it to go to Row 23 and do the same.
My goal is to leave only rows (between rows 22 and 50) that have the same value in its column E that match cell G3.
View 9 Replies
View Related
Feb 3, 2007
I am looking for a formula to repeat a given set of values, a certain number of times ...
See attached for visual explanation ...
View 7 Replies
View Related
Feb 27, 2009
I have a 34-page workbook. On Every Row (starting on line 4), and on Every Page (except the first "Summary" page) is repeated, this same formula....over and over again in column "N":
=IF(A4<>"A",(IF(AND(A4<>"A",OR(J4="",J4="NT")),"OK","WARNING: EXECUTION NOT EXPECTED OF LOW PRIORITY TEST CASE!")),IF((LEN(J4)=B4),"OK","WARNING: STATUS DOES NOT EQUAL TC COUNT!"))
So, since this keeps repeating over and over again, is there some way (either by formula, macro, or whatever), that I can prevent the constant repeating on every line, to bring the file size back down? [Note: This formula alone actually added almost 5MB to the file size!]
Two things to know:
- The formula above is seen on row 4 (that's why you see "4" all over the place). On Row 5, it would be "5" instead, and so on...
- The formula above always starts on row 4, and goes down to the "last used" row, in column "N" (so there's other information in that last used row as well).
....hopefully this is a very easy thing to do?
(PS: Thanks PeterSS for the help creating the above formula in the past...hopefully it can now be made less repetitive to conserve ~5MB of file space!)
View 10 Replies
View Related
Jan 30, 2014
I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
View 1 Replies
View Related
Mar 23, 2014
I have values
2
8
9
As so on in my cells a1,a2,a3 as so on
And I want value of column a repeating five times of each cell value in column b
like result
2
2
2
2
2
8
8
8
8
8
9
9
9
9
9
and so on
View 3 Replies
View Related
Jan 15, 2010
Sub For_Adam()
For x = 1 To Range("G7")
Calculate
Range("G11").Select
Selection.Copy
Range("B15").Select
ActiveCell.Offset(x, 0).Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Next x
Application.CutCopyMode = False
End Sub
Now all I want is for this to be repeated in the next column, so everything is exactly the same but it doesn't start in B15, but starts in C15, then D15 etc.
View 9 Replies
View Related
Aug 23, 2007
I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.
It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.
I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.
View 9 Replies
View Related
Feb 19, 2010
I have a formula that is working, but I want to repeat it every seven columns. I know I can drag it and release it (or drag a few and release them in the appropriate column), but at this point I have so many columns that it's quite cumbersome to do that. Is it possible to create a macro that will automatically repeat the formula in every cell seven columns to the right (the same row for all)?
My formula is in cell K7 is:
=IF(AND(K24<=0%,K24>=-2%,OR(J32="T",J32="F")),1,"FALSE")
Now I want that formula to repeat (with the proper adjustments) for cell R7, i.e.:
=IF(AND(R24<=0%,R24>=-2%,OR(Q32="T",Q32="F")),1,"FALSE")
and then to automatically continue like that for cells Y7, AF7, AM7, and so on.
View 6 Replies
View Related
Aug 27, 2013
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code:
Sub Copy()
With Sheets("sheet1")
typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code:
=IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
View 2 Replies
View Related
Jan 5, 2014
I have 2 column in Excel sheet A and B .
What i need that when i enter values in the first column A the column B copy this values , but when i repeat value in first column A .
The column B would not copy it that all I need .
View 2 Replies
View Related
Nov 23, 2013
I know how to use data validation to prevent repeat values entered into a column on one worksheet using data validation. I don't understand how to do this across 12 worksheets (months of the year) in a file.
To be more clear: When I enter an ID in a column cell, I want that to be compared to all the other ID's in all the past worksheets and rejected if it has already been entered
All are column D The values entered are identification numbers and have both letters and numbers.
View 5 Replies
View Related
Aug 21, 2009
I'm looking for is to repeat this formula within the cell, so that it can pull the information of not only the first match, but all matches proceeding it. Right now it only pulls the first match it finds, but I would like it to add every time a row matches the criteria of the formula.
=(LOOKUP(2,1/(('Paste SFHS'!$A$2:$A$9=A2)*('Paste SFHS'!$B$2:$B$9="08-Wave/Stu. Goals")),'Paste SFHS'!$C$2:$C$9))
View 5 Replies
View Related
Feb 4, 2009
I have a column of text strings in a2.a??? this is my data. Each text string has a persons name somewhere in it with other text around it.
In column c2.c??? i have text names of people names im searching for. eg. bob,jane,harry
what would be a pratical use of the vlookup function to return the name in column b2.b??? if the name from C was located in the string in A this is a non case sensertive requirement.
View 9 Replies
View Related
Jul 8, 2009
I am in the process of developing a budget template for next year and here is what I want to accomplish through Macro to avoid the tedious mannual manipulation process (hope that's achievable). BTW, I am only an entry-level Macro user who has no background in coding.
I have attached an Excel sample but let me explain:
In each of the expenses tabs (1, 2, and so on (only 1, 2 given in the sample)), I want to be able to select a range of the data cells (A19:Q34 in "Expense 1" and A10:Q28 in "Expense 2") and run this Macro so that:
1. 10 blank rows be inserted between selected data rows
2. A sum created for each month from the four rows below) with different color
3. A Year to Date Actual and To Year End Forecast created based on the VLOOKUP of the "P&L" matching the account code by month
4. Finally grouping of the first 9 rows.
the above is what I have manually created for the first account code in the "expense 1" tab. I have 7-8 expenses groups and about 200 account codes. So mannually creating the above for each expense groups is not that terrible if this will make life easier for Macro.
I would think this is a very typical Macro issue but can't really come up with anything.
The other issue I ran into the VLOOKUP for the YTD Actual and TYE Forecast. It is to look up accont code in the "P&L" tab and match the #s. But the column numbers in the VLOOKUP do not change automatically when I copy across. Thus I have to change mannually, which is really a pain in the butt. I also know I can't copy down because that will change the account code that I want it to match. Because to be able to copy the VLOOKUP formula across the same account code, I need to use the $ to fix the account code. But to copy down I think I need that to be without the $ sign. Any solution on that?
View 9 Replies
View Related
Jan 23, 2013
Here is an example list:
Networks
Hardware
Networks
Software
Networks
Resources
Apps
Hardware
Apps
Software
Apps
Resources
Domain
Hardware
Domain
Software
Domain
Resources
Print
Hardware
Print
Print
All I'm trying to do in the second column is something that can say if there is a change in column A, then restart the order, or not..
View 9 Replies
View Related
Aug 27, 2010
I was wondering if there was an array formula or some VBA code which can transpose/repeat values based on a count. Below is an example of what I mean:
Name Count Output Tod 4 Tod Bill 3 Tod Sue 5 Tod
Tod
Bill
Bill
Bill
Sue
Sue
Sue
Sue
Sue
View 6 Replies
View Related
Apr 14, 2014
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies
View Related
Mar 31, 2014
I wish to create a spreadsheet which has formulas which would enable me to see if a patient has had more than one referral created within the next 30-90 days [the actual number of days not important - the ability to modify the formula to reflect which time period required would be cool] and also to see if a patient has been referred for the same medical condition again. Thus in my mind at least two different formulas - has the patient been referred again within a time period of days and has the patient been referred again for the same medical condition.
Attached is an example referral spreadsheet I have created
View 4 Replies
View Related
Feb 27, 2014
how I can have a formula repeat down a column five times before it changes to another formula? For example. Say on tab 1 I have a list of products. On tab two I have five codes that repeat down the page over and over again. On tab two next to the repeating codes I need to repeat product one 5 times and then skip to product 2 on the 6th row and repeat five times and then skip to product 3 on the 11th row and repeat 5 times and so on?
View 10 Replies
View Related
Dec 29, 2008
I can get only so far, then stumped:3 columns (Hours, Rate, Amount). "Hours" is a 'List' with data from from another sheet. Data is named 'Worked'. 'Worked' is all 2 decimal numeric (represents total time worked), except first item called "Live In"
IF 'Hours' is "Live In", I can use: =IF(A1="Live In", SUM(B1*1))
How can I make it conditional so that if it's not "Live In", then it will SUM(A1*B1)?. SideNote: 'Worked' LIST has total time with minutes expressed as 1/4 of hour (i.e., 1.25 = 1 hour, 15 minutes).
View 5 Replies
View Related
May 20, 2013
Keep getting compile error.
Sub CreatingCT()
'
' CreatingCT Macro
Dim ConsolidatedTrend As String
'Path to File
ConsolidatedTrend = "(d:2013"&(IIF((MONTH(NOW())+1>9),"(1","(0")&(MONTH(NOW())+1)&") "&TEXT(DATESerial(YEAR(NOW()),(MONTH(NOW())+1),1),"MMM")&"Consolidated Trend - "&YEAR(NOW())&" "&MONTH(NOW())+1&" + "&(12-(MONTH(NOW())+1))).xlsb)"
ActiveWorkbook.SaveAs Filename:=ConsolidatedTrend, FileFormat:=xlExcel12, CreateBackup:=True
End Sub
View 5 Replies
View Related
Feb 8, 2014
I would like to repeat a formula and make its dynamic depending on the request.
The formular that I would like to repeat is:
=IF(ISERROR(INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3)),"",INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3))
View 2 Replies
View Related
Jul 13, 2012
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
View 3 Replies
View Related
