I currently have a macro to import user selected .Dat files into a new workbook, each on its own worksheet. My problem comes in trying to save this new workbook in the same folder as the imported .Dat files. I was thinking there should be a way to gather the file path from the imported files and use that in the Save As command.
[Code]......
I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
View 2 Replies View RelatedI have figured out how to save the workbook using a variable to saveas but I would like to create a new folder to place the new workbook into. I have tried a few things a am not having any luck. I recorded a macro and the code it produced is as follows.
View 6 Replies View RelatedI have been trying to edit a code which previously saved a copy in a new workbook to a specific folder/path. (Additionally it copies and clears some figures, but this is working as it should.)
However I would like the copy to be saved at the same location as the original workbook, regardless of the path the original workbook is saved.
I.e if I need to move the workbook containing the code to a new folder/location, when using the macro, the new copy should be stored in the same folder/location as the original one.
For now it is only saving the copy into "My Documents"
Code:
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 16-02-2009 by ceng
'
Sheets("Bunker ROB").Select
Sheets("Bunker ROB").Copy
ActiveWorkbook.SaveAs Filename:= _
ActiveWorkbook.Path & Range("D3"), _
FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
[Code] ........
I've go a shared Workbook, which will be distributed among several users and stored in different places. The workbook uses the following
Sub savemeas()
Worksheets("data").Visible = True
Sheets("data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="d:" & Range("a1").Value, _
FileFormat:=xlText, CreateBackup:=False
Application.DisplayAlerts = True
ActiveWorkbook.Close SaveChanges:=True
End Sub
to save the sheet "data" as a text file with a name based on the value of cell a1. All I need is to modify the code so that the target path would not be
ActiveWorkbook.SaveAs Filename:="d:" & Range("a1").Value
but be the same as the source Workbook's - so that I wouldn't have to modify the code for each user separatly, because the sheet would alwayas be saved in the same folder as the current path of the source workbook.
I have a workbook that is located in a folder and i need to copy this folder into multi locations, i need a save as macro that will save the workbook back to the same folder location it was opened from, i have got the workbook file name that i wish to use in N6 of the workshee
View 3 Replies View RelatedI want to write a piece of code where each day i run this code
I want add a workbook
Copy range ("A1:C5") to this new workbook
Save new workbook in a particular folder with the name customer data and todays date and save as CSV file
I run this this code every day so it should only add todays date at the end for filename
If for some reason I run this code again in the same day..
I want to have a msgbox stTing you have already ran this code today and exit sub
I have a summary workbook that I want to save into different folders designated by the input from my userform. My directory has folders named: "A051 - Watson", "A052 - Gila Bend", "A065 - Tompkins"... etc; but I want to designate which folder to put the summary workbook in by the first 4 characters in the folder names(A051,A056,A055...etc) Let me know if I made it clear enough.
View 4 Replies View RelatedI need to save an excel workbook when a "backup" button is pressed to a folder named "Backups". I want the name to be the "date" (09/07/2013) only and I want it to automatically overwrite anything previously saved for that day.
Book1.xlsm
What is the code to automatically save the new template worksheet in a folder and name defined in a couple of cells.
The folder name will be always be: "Q:AssetsCustomersfolder name"
I need the folder name to come from cell C3 on the spreadsheet and the filename to come from cell R3.
I recorded a macro to save a workbook to a specific folder using the current file name. However, I've tried to remove the absolute reference to a specific filename but it is not working for me. Am I close?
ActiveWorkbook.SaveAs Filename:= _
"H:Files and DocumentsPROJECTSSR 2 SS Phase Two Component ReliabilityWinTrac Files xt_conversionsexcel_version" & SheetName _
, FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False
I have a spreadsheet that requires an entry into an Input Box before the rest of the workbook is created. Users click on the button, an Input Box appears and they must enter data. Once the data is entered and they click OK the file is created and saved to their local drive with the name ".xls" and then the sheet closes.
What I want is to have the file that is created be named as whatever the user enters into the Input Box field.
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
I am an excel user and know only some basic functions of excel. My query is how do i save data inputted in an excel sheet to another sheet in database form (tabulated). I will try to explain what my present input and outputs are and what I would like to achieve. I think this would make my requirement more understandable.
Present Input:
My Excel Sheet (has only one record per sheet). This after being filled up, is printed. This sheet gets overwritten when a new record is filled in as it replaces the previous data.
Present Output:
Hard Copy of the form, which is printed.
Required Input:
Excel Sheet (has only one record per sheet). This after being filled up, is printed. This sheet gets overwritten when a new record is filled in as it replaces the previous data.
Required Processing:
As the sheet is printed, it should save the data in tabulated form in the same file on a different sheet.
Required Output:
1. Hard copy of the form, which is printed.
2. Saving the data to another sheet in database format i.e. in tabulated form so that analysis or comparisons may be done.
i want to create folder depending on cell value a1 select data from a1 to h20 save this as "b1 value.xls" my saving directory is c:
eports"a1value" ....
I have a list of items in an excel sheet... 500 of them... and there are images for them in an other folder... The problem is those images are in 1000's and I only need those 500 images.. Images are saved as "SKU.jpg eg NS2354.jpg and we have an SKU column in excel as well .. SKU and their images have same name...
Is there any solution to pick up only those 500 images from those thousands of images?
Is it possible to save those 500 images in an other folder?
looking for some code to save to a destination
destination address is
C:Documents and SettingsstDesktopOJF
now the problem is OJF has folders named 1 to 500
so if cell d5 = 487 it will need to look in the above desination and then open the folder and save it there.
I have a excel sheet in it. Is it possible? That when in any cell I input data in a cell and press "enter" then it save automatically.
View 8 Replies View RelatedI have a spreadsheet called contacts which is as it says, I have another sheet called project management, I want to have a drop down list which refers back to the contacts spreadsheet, it this possible as they are two different files?
View 4 Replies View RelatedI am importing external data to "Workbook A" from the source workbook, "Workbook B." Workbook A is set up to refresh every 15 minutes. Workbook B is shared. I am recieving an error saying either, the 'file is in use', or 'the file is locked,' depending on the senario.
Scenario 1:
1. I open A and enable data connections.
2. I try to open B, but receive the message: '(File location...) is in use. Try again later.
Scenario 2:
1. I open B.
2. I open A.
3. I go back to B to edit information.
4. When I try saving the information I get the following message: 'File is locked. Try the command again later.'
I need to be able to have A open and periodically refreshing. I also need to allow users unhindered access to B at the same time.
I have a macro that copy one sheet of the Active workbook and sends it via email.
I need to add a code in this sheet so when one opens it from the email, with a command button to be able to save the file to specific, fixed folder on the local network with it’s original file name.
I would like to create a code that will open all workbooks in folder "A" one at a time and then close the work book after another code is executed. So one workbook will open and while the workbook is open, I will call another code to format the active workbook and then the active workbook will be saved in folder "B" and closed and go to the next workbook in folder "A" to start all over. The folders are saved on the desktop.
View 5 Replies View RelatedI want to get source code of htm file. The files are on my folder (E:SepehrData).
The files names are like A2 [F1].htm, E2 [F4 conv].htm, E2 (DC L180G).htm and etc.
I want to bring all source code (with the tags, ) on a worksheet at column A in cell A1.
Example below.
HTML Code:
--------------------------------
<!DOCTYPE "-//DTD HTML //EN " html public>
<HTML>
<HEAD>
****** content="Vanemeze">
****** charset="ISO">
</HEAD>
<BODY>******** type="text/javascript" src="..showHide.js">
[Code] ..........
I have two workbooks open. I need to "Save As" and close workbook 2 with a file name from a cell in Workbook 1. The macro is running from workbook 1.
I'm guessing a change in the last line. I don't know what Dim means either.
Dim FName As String
Dim FPath As String
FPath = "G:"
FName = Sheets("sheet 1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName
[URL]....
I have 4 workbooks, all of them contain data that is managed by other teams at my company. I need to take all of this data, organize, and concatenate it into one sheet for myself, that I will then reference in other workbooks to various OTHER departments in our company that need the data for certain projects. I have the organization laid out in a lot of very complex formulas so that most of this is automated, and not manual.
I need a solution that can pull data from the 4 workbooks without locking them for use, to allow me to keep my document open all the time, and they can update theirs at their leisure. Everything works fine, until I hit the refresh button. Once this is hit, all of the linked documents are locked and cannot be opened, even in "Read Only" mode. Once I close the master document, the files are free to be opened. I know a workaround for now is that i can not "refresh" the document, but rather close and re open it for changes.
Some steps I have already tried :
1. Create an intermediary file that no one uses, and can be locked all day without a problem. This doesn't work for me since the intermediary file needs to be open to refresh, which locks the original source doc, leaving me in the same place as before.
2.Modify the connection string to display "Mode=Read;" instead of "Mode=Share Deny Read"
3.Create a new connection with "Read" only selected in the Advanced Tab
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
View 1 Replies View RelatedI have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
Say I have Source Workbook X 1, and Destination Workbooks X 4. The Source workbook contains a number of lookup values. I want the lookup values to be maintained in the single Source workbook, and I want this workbook to remain closed when the end users are using their Destination workbooks. It is critical that certain cells in the Destination workbooks have validated data in order for formulas and summarizations to be correct.
I'm happy if the Destination workbooks contain a lookup worksheet (perhaps hidden). In short, I'd like the contents from the Source workbook, Lookups worksheet, to just be replicated "as is" into the Destination workbooks, Lookups worksheet. I then want to do my data validation from that worksheet, which of course is open (data validation appears to only work with open workbooks).
I've investigated the techniques in this link: [URL]
Questions:
1) Are the techniques in that link about the best approach? i.e. an external link plus array formulas?
2) A blank cell in the source workbook (text column but formatted as General) is resulting in a zero in the external link. How can I make the external link exactly match the text as entered in the source workbook?
So I have a workbook (Workbook1) that opens a userform on launch. I have another workbook (Workbook2) that has a button to open Workbook1. Upon opening Workbook1 (and as a result the userform) I'd like to input data from Workbook2 into the fields of the userform. I'm not exactly sure how to reference the userform fields to input data from Workbook2.
I'm trying the following code:
Workbooks.Open (Workbook1)
With Workbooks(Workbook1).Userform1
UserformField1 = "Billy"
UserformField2 = "John"
End With
The macro is opening Workbook1 and the userform but the fields return blank.
I am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.