So I have a workbook (Workbook1) that opens a userform on launch. I have another workbook (Workbook2) that has a button to open Workbook1. Upon opening Workbook1 (and as a result the userform) I'd like to input data from Workbook2 into the fields of the userform. I'm not exactly sure how to reference the userform fields to input data from Workbook2.
I'm trying the following code:
Workbooks.Open (Workbook1)
With Workbooks(Workbook1).Userform1
UserformField1 = "Billy"
UserformField2 = "John"
End With
The macro is opening Workbook1 and the userform but the fields return blank.
I have a form which creates a budget based on user input. I want to save that user input in a separate workbook. My goal is to reduce the file size. I have several modules which perform evaluations/ calculations, and then format the output in a worksheet, but the size is pretty large 450KB.
I was thinking that I could set the control source, to different cells on the worksheet, and then just copy the worksheet to a new workbook, and save the data by itself. Then if I wanted to change the data for a given budget, I would copy the sheet back into the workbook that contains the modules, and load the form again. Is this a good solution? Is there a better way? Please let me know if I can provide more information.
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
Is it possible to have a single userform put data into two separate sheets within the same workbook.
I have a userform set up for entering client data into a quote register,with no problems ( sheet 1)
A1, A2, A3, A4, A5, A6, A7, A8, A9
What I would like is for the data to also go to sheet 2, where I have a form set up to print off for our technicians to take on site.
The problem will be that I would like the data A1, A2, A3, A4, A5, A6, A7, A8, A9 not to store on this sheet after it is printed, so the next set on entries , can be printed etc.etc
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
I have a spreadsheet that has a couple of columns that ask for "Move In Date" and the other "Move Out Date". These dates are used in other calculations so there can be only one or the other in each row. I have users that mistakenly either leave both blank or both popluated. Is there a way to stop them with a message telling them that a date needs to be entered or deleted, maybe with data validation?
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL ATL ATL ATL CEN CEN JCK JCK etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
Creating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
I Want To Use User Form to add data with multiple condition........
1st condition : select name, AHSAAN G, ALI G, SHAHID G....... 2nd condition : select , ONFLOOR BC, ON FLOOR VC, ON LINE VC 3rd condiotn : select, PT P2 P3 PB HR LK
In this use form the i used define name "name_1"
1 = I Added this to combobox 1. if if a aded a new name who is not in the list "name_1" then he asked for added this name or name. if i click yes then added the name in "name_1" list.
2 = When i added the data to my sheet by default all field of UserForm don't blank....
is it possible to place sheet names beside the data? What I mean is that, I'm currently working on a report which extracts data from the current workbook (many sheets) and paste it into a new workbook. As there would be duplicates due to many different sheets. I would like to have the duplicates removed but have the sheets name which they are found in the columns beside.
Im working with a huge amount of data in BOOK1.xls and once or twice a week I received an update of the list.
1. I need to compare and find out from the new updated worksheet if there is a new revision, and if there are new documents added to the list. I have tried Vlookup..but it didnt work for me. Ex. Doc1 has revision 1, 2 in my BOOK1 that I am working on. Note that there is a repetition of the DocName, Doc Number except for the revision.
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
what VBA is required to have a combo box in a userform look up data in a different workbook, then populate that data into the drop down list of that combo box for a user to select.
I have managed to successfully create a vlookup for a combo box in a userform that looks up data in a named range in another worksheet within the same workbook and then populate that data into a field in a worksheet within the same workbook. However, I want to change this so the combo box on a userform (in one workbook) will look up data from a named range in a second workbook without opening the second workbook. At the moment, the code I have that will 'submit' the user selected data from the combo box drop down list works.
The code that has worked so far to vlookup data for the combo box from a worksheet within the same workbook is:
Code: Private Sub UserForm_Initialize() Dim pName As Range Dim ws As WorksheetSet ws = Worksheets("vlookupsheet") For Each pName In ws.Range("ProjectName") With Me.cboProjectName .AddItem pName.Value End WithNext pName Me.cboProjectName.SetFocus End Sub
Do I need specify the file path of the second workbook that will contain the data for the combo box as well as the name of the worksheet and named range in that second workbook?
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData() For Each cell In Range("A1:A1") ' Where to look for the date If cell.Value = "AIM Land Services Ltd." Then ' The date Range("A5:O350").Select ' What is the range to copy Selection.Copy ' Copy it Sheets("Invoice_Log").Select ' Select the Sheet it applies to Range("A5").Select ' Where to paste the data
I currently have a macro to import user selected .Dat files into a new workbook, each on its own worksheet. My problem comes in trying to save this new workbook in the same folder as the imported .Dat files. I was thinking there should be a way to gather the file path from the imported files and use that in the Save As command.
I am trying to set up a new workbook for my home accounting, this will consist of a seperate sheet for each item which will store the monthly payment data and a master data input sheet, where i intend to select the month and year from a drop down list, then input the amount in each entry for that month. hopefully i will then be able to hit enter and all data will be sent to its corresponding position in its relevent sheet.
I want to enter a number in cell, select a value from a drop-down list, and have another sheet updated with that info. For example, on sheet1 cell A1 = $900, A2 = Western Region (drop-down list). Sheet2 would have a list of values that would update based on values entered in sheet1:A1 and sheet1:A2. Is this possible using formulas or do I need to use VBA?
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
Is it possible to have a userform open in a workbook and when the data from the form is saved, save it to a completely different workbook. If so, will that other workbook need to be open for the userform data to be saved?
Is it possible to have a userform open in a workbook and when the data from the form is saved, save it to a completely different workbook. If so, will that other workbook need to be open for the userform data to be saved?
i have a workbook blank template for my colleagues to fill in, they fill in this blank template and save it under the serial number of the item they are creating. However a lot of errors exist when they input the serial number inside the workbook where the serial number is a duplicate of a former serial number.
Anyhow i was wondering is there any way when they input the serial number into the worksheet that i could get it to save in a separate workbook and then have conditional formatting to check those serial numbers in the workbook to see if they match?
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type [30] in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
I have a requirements to do a simple monitoring data entry. Composed of 1 admin and 10 users. These 10 users are assign to a different lines basically every lines have assigned user.
These 10 user will do a data entry. once they are done on the data entry the Admin will update those entered by the users based on ticket number and the users can browse those updated records.
Every users per line have assign ticketnumber that start in "L1"&YY&MM "-"001" this compsed of lines + year+month and numbers.
For the users side. Right now i have already created a workbook with userform to perform data entry by user (samplefor line1 and line2 user).
It has also a viewing form to view by the users if its already updated by the admin. i put also an events if the admin work book is open by other user they cannot access the workbook.
For admin side. I created also a userform for updating the records entered by the users to update records admin will enter ticket number to textbox.
This is the reference to find and search those records that belong to a particular ticket number and lines which will be updated by the admin.
Right now, I am doing records consolidation for both user and admin records. I have a button for both admin and userlines to perform consolidation. Once the user entered the records admin will capture those records and copy to the workbook used by admin to perform update. Then once the admin perform update the user will capture those updated by admin and copy to the workbook under the user.
Basically they have separate workbook for their entry and database.
Right now I encounter some issues which I think this will affect the integrity if records. Sample like once i perform consolidation it create duplicates records.
I've been investigating how to use a UserForm in Excel. While I've learned some, I can't quite figure out how to export the data from the UserForm. I want the form in one workbook and have it record a new row in a different, but constant workbook each time the action button is clicked. I have been able to create the form and included the action button, but I don't know what code to assign to the button.
I think I know the important pieces to the puzzle, but I don't know the syntax or how to put them together.
Form Details: 2 Text Boxes (TextBox1 & TextBox2) - TextBox1 is the Employee Name. TextBox2 is the Employee Number 10 List Boxes (ListBox1:ListBox10) - All ListBoxes will return a value of either "Yes" or "No". 1 Action Button (RecordCommand)
Export Details: File Path Where the new workbook will be stored: E:HR Team Audit File Name of Workbook where form data will be stored: "HR Audit Record Workbook.xlsx" Column Headers will be in Cells A1:L1 of that workbook
Below is the code for the Text and List Boxes:
Code:
Private Sub UserForm_Initialize() With TextBox1 End With
With TextBox2 End With
With ListBox1 .AddItem "Yes" .AddItem "No" End With
I have a userform which loads the data into a worksheet named "Data" which is being used as a database for an event scheduler. I also load a calendar from a worksheet named "Month" so I need the information from the userform "UForm01" added to 2 worksheets.
The userform adds a series of textboxes to worksheet "Data" in the first open row. I also need certain textboxes from the Userform to be added to another worksheet to populate the calendar.
