I can't figure out the specific way to write a Do Until where it exits once there is no more text in any further rows.
Basically scan the rows and find the last remaining row. If there is no data after 20 rows then exit the loop.
This is a sample.
A
B
C
D
F
G
H
I
J
I would want it to understand that there is no information after "J" and to exit the loop.
In the code below I find rows containing "$$ #" at the far left and process it.
For all the remaining rows I want to delete the entire row, my macro only deletes some rows. Obviously I am not grasping something about looping throught the rows to delete unwanted data.
The issue is to find the address (like A1) to the cell that contain specific text string?
I import text from a web page and I want to calculate some numbers from this information. All the information is spread out in 10-15 columns and 20-25 rows, and the specific value I'm looking for is imported into different rows as the dynamic web page changes, but the column is always the same.
The cell next to the left side of my wanted cell always contain the same text, so I thought I could search or scan the area A1 to P25 for this text and then extract the value of the cell on its right hand.
I'm looking for a code that will scan the rows (x) (of which there are 10), and print the data for the corresponding columns (y) (of which there are 42).
View 9 Replies View RelatedI am paste valuing from one sheet to another. The size of the data changes each time so to manually delete all Null cells is a pain.
If I do not delete them it sucks up 3 megs of space. I have searched the board several times looking for a solution, lots of discussions but no solutions.
It would be great if I could find that first cell that contains the Null string and then delete the cells remaining in the column. Any suggestions would be greatly appreciated.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
View 1 Replies View RelatedI am trying to scan through all files within a directory and all subdirectories to find files where the name begins with certain characters. Below is code that will accomplish this for a certain directory, but I do not know how to look through the subdirectories within the specified directory. So, the issues are:
1. How do I loop through each subdirectory within a specified directory?
2. I am trying to return the file name, path name (separate from the file name), and modified date. I can return the name. I can return the path, but it includes the name. Is there a way to return just the path?
3. What is the code to return the modified date of the file?
I send out 300 or so spreadsheets. The spreadsheet contains lines of products that recipients have on hire. Column L allows to the user to put YES or NO on each line, to state whether it is correct or not. The user then sends this sheet back.
The difficult part for me is I have to open each spreadsheet, and deal with all the instances of NO in column L. It takes almost a day to go through every spreadsheet.
Is it at all possible to have some sort of macro, VBA sript or access front page, that allows me to search all instances of 'NO' in all the spreadsheets which are in 1 designated folder?
Hopefully I am making sense in what Im after.. ideally I'd need a button on a spreadsheet that I click to give me all rows that contain NO in column L.
All the file names will be constant each week. (so each file name will be 01 - Hire List.xls, 02-Hire List.xls, 03-Hire List.xls etc etc).
Would like to know is that possible to scan some information, e.g table or figures, into the excel spreadsheet.
View 5 Replies View RelatedI want to scan the envelopes coming into our postroom and look up the results within excel. I would then if I match the name be able to print out the details e.g. name floor they are located on etc..
View 3 Replies View Relatedi've created a spreadsheet that will take in scanned files (from a barcode), log into our system, update the files based on certain criteria, then take information from the file and place it in another worksheet for inventory purposes.
what i'm asking is... is there a way i can have excel drop to the next row each time i scan in each file?
i've noticed the output of the scanner is formatted like this: +000000
i've tried using the sendkeys method with the plus sign, but it always moves down THEN enters in the numbers. i'm not sure if there is a way with the Len function... or some variation of that.
i'm also thinking if i could maybe find the .dll for the scanner, maybe i could set up a reference to it, and have it do something like "afterbarcodescan.activecell.offset(1,0).activate".
I have some code that scans each worksheet in a workbook for sheetnames beginning with 'Model'... if the worksheet name matches, it prints only the used pages on that sheet (see code below).
Dim Ws As Worksheet
For Each Ws In Worksheets
If Left(Ws.Name, 5) = "Model" Then
If Ws.Range("A46").Value = "Page 1-1" Then
Ws.PrintOut From:=1, To:=1
ElseIf Ws.Range("A46").Value = "Page 1-2" Then
Ws.PrintOut From:=1, To:=2
End If
End If
Next Ws
This code works... but I would like it to scan the workbook in reverse order...
ie. print from the last matching worksheet first.
I want a formula to scan column B for a given word. One version of the formula will look for the word "ACAD", the other "GOV". If it shows ACAD anywhere in column B, I want to put ACAD in column D.
View 10 Replies View RelatedBar codes would contain a part number and a quantity.
822808 / 1604 pcs
1st question: I have scanned them into excel, but how does the next scan get into the next cell? It is currently putting multiple scans into the same cell.
2nd question: Can the data be broken up into separate columns? (e.g. Column A = "Part Number", column B = "QTY") I know about text to columns, but I think I have to get the format right?)
I've been using a nice colorful spreadsheet to use to schedule rooms for an organization. Visually it has worked out well but now I need to automatically generate a 'report' using that data. So...
I want to scan each row of a table and create another table with that data transformed.
That is, scan each row and whenever I find any text in a cell I want to return that text (the room being used) as well as the row and column header information (who is starting to use that room and on what date). I've attached a jpeg to show the example.
Ideally, when I scan the row and find text to return the headers I'd like the row scan to also find when the fill color changes and return that column header, too as that that would be the date that the room stops being used.
Is there a way to scan a document into excel 2003 and be able to keep the current format ? or some way to be able to get it into excel and the easliy put it back to the format I need?
View 2 Replies View RelatedCan I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View RelatedI use a scanner that initiates a f2 command and trips my macro. I would like to use multiple scanners using a 8 port hub but I am having trouble with a scanner starting my macro and another scanner dumping data into my macro before the first one is finished. This is dropping scanned data into my macros. Is there a way to prevent the scan from accepting data until the macro has completed its cycle.
View 2 Replies View RelatedAttempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
The error happens at this point: ...
how to build a formula that would allow my remaining UOM and it's associated cells to move up to the days remaining UOM once my time goes below, say 31 days.
View 3 Replies View RelatedI have a table which contains Day, Projects, Proj Completed and % completed. I would need to get the target % starting thu so that I can end the week completing 90% of all my projects. Fri - Sun would show the same targets as Thu. Once Fri comes, i just need to update Thu with the actual projects I completed and Fri - Sun will show me my new target % to achieve 90%. Just in case hitting 100% will not achieve the 90%, it will just show 100% for the remaining days.
DayProjectsCompleted%
Mon4375%
Tue55100%
Wed8450%
Thu9?? If today is Thu, whats my target % to close the week at 90% ?
Fri8??Fri, Sat and Sun would show equal targets as Thu.
Sat6??
Sun7??
Total 47?90%target % at end of week ( formula for % is total completed / total projects)
I am trying to create a "daily donut" to track how long it has been since I left for my current deployment, and how much time I have left until I return home. I would like to show exactly how many year(s), month(s), day(s), hour(s), minute(s), and second(s) (like 1 year, 4 months, 4 hours, 5 minutes, & 34 seconds not 1.0 year, 0.33 months, etc.) it has been (again, not 3600 seconds, 60 minutes, 1 hour, etc.), and how many I have left. I have spent many hours trying to figure this out, and I have even tried looking through this forum, but I still can't completely figure this out. I was close in figuring out the date differences in the x amount of years, months, and days format, but it wouldn't account for the time. I.E., 06/03/09 05:00:00 AM - 06/01/08 06:00:00 AM, would show 2 days, instead of 1 day (I'm not sure how to incorporate the time yet).
The variables are:
A1 Date I Left For My Deployment in M/DD/YY HH:MM:SS AM/PM
A2 =Now() Function in Same Date & Time Format as A1
A3 = Date I Get Home from My Deployment in Same Date & Time Format as A1
Any ideas or help? And if possible, I would like to be able to do this using excel's built in functions (not excel add-ons, vb, etc.), so that it would work on government computers.
I'm trying to create a spreadsheet that will subtract time remaining for a client.
IE: A client has 3 hours of time. I work for 17 minutes, leaving the client 2 hours and 43 minutes:
A= 3
B= .17
C= 2.43
I am making a break timesheet. My UserForm contains Start and End Time button. User clicks start button, a message prompt will appear containing the time he needs to be back in taking his break. The start time of his break will be pasted on the worksheet.
After that, user needs to click the End button to paste the end time he returned. A message prompt will appear stating the remaining time of his break if he comes before the allotted break time say " You still have 00:15:00 left" click "Yes" to end break click "No" to continue your break." If the user click Yes, the time he click the button will be pasted on the worksheet.
Here is the code I have but I am receiving error message "Method 'Range of object_Global failed":
I am trying to get a formula that will give me the number of days remaining in the week. I have a formaula for number of days until the end of the month and number of days until the end of the quarter, but just need the week.
So if the formula was run today it would show 4 as the result.
In Column A, I have the dates listed as such. Common point is that, they are all 1st day of the month.
In Column B, I have Quarters as such.... (Please see below)
Can I put a formula together, to round up how many months left in that particular quarter ? example
Date Q3 2014 Q3 2014 Q1 2015
9/1/2014 1 3 3
Column A
9/1/2014
12/1/2014
6/1/2015
9/1/2014
9/1/2014
6/1/2015
9/1/2014
9/1/2014
...
..
Column
Q2 2014
Q3 2014
Q4 2014
Q1 2015
Q2 2015
...
...
I have a list of numbers . Several numbers are pulled, based on criteria, and then I need to create a list with just the remaining numbers.
EXAMPLE:
A) Numbers 1 - 500, defined by name (So I can INDEX them later)
B) Pull out numbers 47, 3, 143, 224 (based on certain criteria)
C) By INDEXING the field, create a list of numbers 1 - 500, omitting the above numbers.
I have no problems with steps A & B. I can't do step C.
I've got a very simple formula in Column P:-
=IF(O1="No","N/A",IF(O1="","","Needed"))
If I click on the cell to review this, it vanishes once I click out and still works. If, however, I click in the cell to edit it and then hit "Enter" the formula stays visible and refuses to work!
I've then tried it on other places where I have a formula on the same worksheet and the same thing happens.... And yet on other columns, it doesn't.
The below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....