I have a pretty large sheet to look into ("CellData"). I am looking in column B which has the following value pattern:
129(8769)
I would like a vba code to search based upon numbers in brackets i.e 8769 only and once it is found that row should be put in a new sheet.
I have some cells with text entered in column A.
These cells contain a time reference either in '09:30 - 16:30' format or just an 'AM/PM' format.
What I need to do is to populate column B with the part of the string that comes AFTER the times in the text (either in hh:mm format or AM/PM format)
Example
336 Data 2012 Classroom Induction 2012/08/28 09:30 - 16:30 data about this ------> data about this
336 Information about this 2013/04/04 09:00 - 13:00 Information 2 ------> Information 2
336 info CHS Suffolk 2013/05/07 PM DRC, BSE ------> DRC, BSE
364 information 2013/02/12 AM DRC, BSE ------> DRC, BSE
I cannot get this to work and cannot use Text To column as there is no character I can use to split it.
I am trying to get the following equation to search for cells that contains the term 3R. The issue is I have several different 3R formations as follows and want it to count all of them.
3R
3R FIB
3R S Nasty
3R S Nasty FIB
This is what I am currently using but I want it to be more detailed. Where my search is for everything on 1st down with 10 yards to go in a 3R formation.
=SUMPRODUCT(--(C2:C350=1),--ISNUMBER(MATCH(Criteria,{10},0)),--(H2:H350="3R"))
23
20
1
10
-19
R
Run
PISTOL HVY
3R
[Code] .......
I have 400 workbooks to examine if cell P54 is 88% or lower. Is there an easy way, or is VBA with a loop the way.
View 5 Replies View RelatedI need a formula (but most likely a VBA macro) that will search through a folder for a file than get data from that file. The files are named in systematic way, but I need the entire formula to work from inputting a mold number in one cell. E.g. I input 6291 in cell A2 the vba macro searches for file “6291 mold.xlsx” and returns a range of numbers as well as pictures in specified cells. Is this possible? If so how?
The closest thing I have found is VBA macro that retrieves a list of media files in a folder, I listed the code below.
[Code] ....
[URL] ....
Have numerous values in Col A. Col E extracts a list of unique values from that column.
In Col C, the Col A value has had characters added to it.
Need a formula to count the number of unique values from Col C which contain the same prefix from Col A, and place the result in Col F.
A sample workdook is attached with the desired result shown and highlighted in yellow.
I have a list of records that for which I cannot find values for. Essentially I have a dataset that I need to match to other information but for some records this 'other information' is missing.
1. I have a list of records with missing information
2. I have a folder with a large amount of sub-directories
3. I have many DBF files inside of these sub-directories with X columns and x rows
4. Somewhere within some row of some column is a value that links to my list of records
5. I need to search for my value in, say, A2 and return the file name and directory in which it lies
6. It can be text or number
is this clear?
I have a value X in cell B5 and a Value Y in cell B6, in multiple worksheets
In my userform, i have 2 comboboxes
one holding value ranges for the x coordinaate (eg 0-10, 11-20,21-30)
the other holding values for the y coordinate (eg 0-10, 11-20,21-30)
i want the user to be able to select a range from the x coordinate and the y coordinate...then i want to search thru all the B5 n B6 cels across the worksheets and return those worksheets that match the users input...
is it possible for this to be done?
I have the following data
A | B
_______________________
WD |100 From Bangalore
CR |Hyderabad 50
CR |Mysore 70
WD |900 From Kolkata
_________________________
and so on in A and B columns. In the C Column depending on the cell value I want just the places like Bangalore, Hyderabad, Mysore, Kolkata etc only to be displayed like shown below.
A | B | C
___________________________________
WD | 100 From Bangalore | Bangalore
CR | Hyderabad 50 | Hyderabad
CR | Mysore 70 | Mysore
WD | 900 From Kolkata | Kolkata
______________________________________
The Places in column B are not at finite position and that is the big problem i am facing when using Left or Right function. Could anyone help me with a proper Excel function to get this done. The thing is the whole cells should be searched and accordingly the output should be obtained.
I have a list of values in column A of sheet 2. What I would like Excel to do is search for each of these values on the whole of Sheet 1. Sheet 1 has around 20 columns of information and a dynamic number of rows.
In column B of Sheet 2, Id like TRUE or FALSE displayed depending if the value is found on Sheet 1. For example
AB
1 DOGTRUE
2 CAT TRUE
3 MOUSE FALSE
4 HORSE TRUE
If this can only be achieved via macro, please post the code rather than a file as I cant download the file here.
I am trying to create a sheet for invoicing. I have a sheet I want to use as a database. I want to search the database from the "invoice" sheet and fill the fields once i have found what I am looking for.
attached is a sample database I will use. I dont want to use the whole row, only selected colums. for example short_item description, item_number, Brand, SRP, ect. I want to search on the "invoice" sheet, for example, item description,and fill out the rest of the necessary fields in that row with data from my "database".
I have created a worksheet with 7 Tabs. 6 of the tabs are tables of existing parts and their catalog information. The Front Sheet I want to be a place where people can select data via a drop down or typed in, and in turn have that headsheet display the results of the search.
I have the 6 tabs broken down by part type, and figured those can easily enough be the first choice on my worksheet. So by picking that I can direct excel to which tab we want to run the search on, but ater that I'm drawing a blank.
For an example, say I'm looking for a Elbow that has a 6 size on one end. I would like to use the drop down to choose "Elbows" and then like to select/type 6 in the End 1 size box and have Excel show me all the reslts from the Elbow Tab that match that criteria.
I have a problem with excel that I have been trying to solve for the past 5 days! I have 2 tables (one with 500 rows, the other with 15000) that contain information about pipes.
The smaller table, Drift List, is to be used as a reference to fill up the bigger table.
Here is how Drift List looks like:
Size NominalWeight WallThickness APIDriftDiameter AlternateDriftDiam.
5.5 14.00 0.244 4.877 7.625
5.8 14.88 0.253 4.915 ----
...
The other table, Pipe Database, Looks like:
Size NominalWeight WallThickness DriftSize DriftType
5.5 14.00 0.244
...
I have to fill up Drift Size using APIDriftDiameter from the first table, BUT if AlternateDriftDiameter is available, I have to use that instead.
DRIFT TYPE column has to indicate either API or Alternate (Depending on which one I have used).
Here are the two files:
[url]
[url]
I have a sheet named "original" with columns a, b, c. My code checks each cell in column C for a value and then copys columns A,B,C to a sheet named "Order". It works fine except I need it to start pasting the results in row 16 instead of row
Sub PLACEORDER()
Dim lastrow_first As Long
Dim lastrow_second As Long
Dim x As Long
lastrow_first = Sheets("ORIGINAL").Cells(Rows.Count, "C").End(xlUp).Row
For x = 10 To lastrow_first
If Sheets("ORIGINAL").Cells(x, 3) <> "" Or Not IsEmpty(Sheets("ORIGINAL").Cells(x, 3)) Then................
I have been trying to find a formula for this but I have yet to find one that works for me.
Data;
English - United Kingdom, Czech, Spanish
UK - United Kingdom
Swedish
English - US
French
US
France
German
Portuguese
+8000 more various values
I am looking for a formula that can search for multiple values e.g. english, us, uk and united and then return the value "Yes".
I was looking for something that includes wildcard searches or contains so that it is not affected by upper or lower case but combining this with multiple searches was proving difficult.
Below is what I currently have on my excel spreadsheet:
1.
2. Input Column 3
3. 0 No
4. 2 Yes_2
5. 0 NO
6. 0 NO
7. 0 NO
8. 2 YES_6
9. 0 NO
10. 1 YES_8
11. 0 NO
The spreadsheet starts by the user inputting numbers ONLY in column 1 (under input). The rest is done automatically by implementing equations. Column 2's equation is easy, if the value of column 1 is greater than 0, return YES_(row number). In addition, the maximum number of Yes's in column 2 is three (constraint).
My problem is that I need a 3rd column, consisting of only 3 rows that search for YES_1, YES_2, and YES_3. The 3rd column's equation is easy, I will simply use the Vlookup function for YES_1, Yes_2, and Yes_3. Therefore the PROBLEM IS: I need column 2 to output YES_1 (in row 4, from the example above), YES_2 (in row 8) ...etc. This would mean chaning the basic IF equation that I have which simply sees if the value in column 1 is greater than 0 then outputting "YES_the row number".
I'm trying to code a macro to search through all the files in certain folders to find a value defined by the user. The rows containing that value will then be copied and pasted into a separate workbook. My boss currently planning on storing about 550 different files (90 days worth of data) between these folders, but there is the possibility of years worth of data collection, should he change his mind about the 90 days, so I'd like the code to be efficient if possible. What I've tried to do is search each file for the value, then set a range equal the first row containing that value. If the value is found in that workbook, the code loops through the worksheet, adding all the other rows with that value to the range. Then the file looping exits (the values I'm looking for are only contained in one of the workbooks) and the range is copied and pasted into the master workbook. Each workbook has only one sheet.
I'm currently getting a run-time error "13" Type Mismatch error when it gets to the line where the code is supposed to find the value and initialize the range.
Code:
Private Sub SubmitButton_Click()
Dim mybook As Workbook
Dim masterbook As Workbook
Dim rownunm As Long
Dim pathparts(1 To 5) As String
[Code] ......
I don't know if this is even possible via VBA, but thought I'd throw it out there and see what you guys think.
In the attached workbook column D contains fields for the UsagePN. If a part is "rolled-up" in our order system to a new part number, then the OLD part number, (in colmn B), is associated with a UsagePN. What I need to do is, for every part that has a UsagePN in Column D, I need to find that part number in column B and add the inventory values from the old part number to the new one.
For Example:
Row 74 in the attachment has a UsagePN of AC1230105V. I need to take the values from cells G74 thru K74 andd ADD them to the existing values in G77 thru K77, which are the inventory values for AC1230105V.
In other words, since part number AC1230105 has rolled-up to the new part number AC1230105V, I need to add all of the inventory to the new part number, AC1230105V.
After this is done for ALL parts with a usage part number, I will delete all the rows containing UsagePN's.
Here's the catch, as you can see in the example, there is no consistency, so a simple formula like adding the values to the same part number with a "V" at the end won't work. I guess you would have to do something like for each row with a value in column D, dim that row so you can refer back to it, then search for a match in column B, insert a "helper" row below where the part number is found to add the quantities, then replace the original with the helper row, and then delete the helper. One of you guys probably knows a better way.
Keep in mind that you won't always find a match, so the macro needs to continue to the next part if no match is found.
I hope I was clear. This one looks like it will be a nightmare, but I hope somebody on here has some ideas.
ColA
there was a dog that jumped over
there was a dog that jumped over the fence
Everything is in ColA. We are on excel 2007. We need to highlight these two are duplicates based on matching the first 40 characters.
Basically, each date, in the format mmm yy, has a cost, two cells right of the date. I want to create year sub totals at the bottom of the cost column by looking up the year element of the date....so in my own wierd logic, I want to ask, if in the range of cells C5 to C22, contains the year 10, add the cost in column E to the total cell (E27).....this is probably laughably simple to you guys, but when you dont know the correct term for the action, it is a swine to find.
View 5 Replies View RelatedI tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
I'm wondering what function I can use to search a specific word in row with many text?...
i attached for the example and details.
I am trying to create a search facility to search for accreditations.
currently my search only picks up on the first word in the cell.
ie Prince will be found in Prince 2 Foundation, but a search on foundation comes up with nothing.
How do i get the search to search all the text in the cell and not just the first word.
I am searching on a number of worksheets but in the same range on each worksheet.
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I want to test a cell for the type of value as 678/256 or 345/872/098/987 etc. The common character in each would be the "/". First, I need to check the cell for this, then take the first number and compare it to an integer(if it is <> , or = to). I hope I am clear with my situation.
View 14 Replies View RelatedI'd like to search a cell A1 containing for example 'hello_L765'. If the 7th character is L and the 8th character is text(ie not a number) than display yes, otherwise display the 7th character.
View 3 Replies View RelatedI have cells that look like the following
PNHWAPN
HWAPN
PN
HCC
PNHWA
HCCHWA
PNHWA
PN
Not the most exciting data, but I need to identify which cells contain the sub string "HWA". Ideally the next column would have that string extracted into it or some kind of indentifier
Using MS Query in Excel, I've created a simple query that pulls its records from an SQL dbase. Here's the statement:
SELECT uvVisit.FacilityListName, uvVisit.DoctorListName, uvVisit.Date, uvVisit.PatientVisitId, uvVisit.PatientLast, uvVisit.PatientFirst
FROM CPS.dbo.uvVisit uvVisit
WHERE (uvVisit.Date Between ? And ?)
ORDER BY uvVisit.FacilityListName
The query runs fine and prompts the user to enter beginning & ending date ranges for the visit date when executed. So far...so good...but, this requires me to manually insert a line in Excel above the 1st record and type in something like: "For Date Range: MM/DD/YYY - MM/DD/YY" to denote the date range that the qualified records fall into (something the user wants to see).
However, I'd like to find a way automatically preface and display in the report's output (perhaps as the 1st line of the report in Excel??) something similar to what I'm already typing, and have it pull the beginning and ending MM/DD/YY values from those supplied by the user in the parameter.
I'm trying to search a column that has cells with various length strings. Included in the strange (at random locations) could be possibly be a 7 digit number starting with 4. I want a formula that counts the number of cells with contain that 7 digit number. Is this possible?
View 11 Replies View RelatedI have a cell that is populated by clicking a button which pulls info from an external source over which I have no control. I need to confirm the selection made by the user contains one of four quarterly values: Mar, Jun, Sep or Dec. I have this but wanted to know if there is a better alternative or a way to shorten the code.
Code:
If InStr(1, UCase(celltxt), "MAR") Or InStr(1, UCase(celltxt), "JUN") _
Or InStr(1, UCase(celltxt), "SEP") Or InStr(1, UCase(celltxt), "DEC") Then