Selecting To Copy First Row Of Data Only From One Worksheet To Another Using VBA

Mar 8, 2013

I suspect this is extremely basic however how do I do the following in VBA? I have dataset with a column having a row of numbers as: 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, etc. What I want to do is copy some information designated by the first 1 then the first 2 then the first 3 to another worksheet leaving the other data. How do I selectively choose the first of the 1, 2 and 3 etc.

View 1 Replies


ADVERTISEMENT

Selecting Multiple Data To Copy Throughout Worksheet

Sep 4, 2009

I would like to create a spreadsheet where I enter a list of 30 – 40 names and associated data over 4 separate columns. I would like the option of having a check box next to each name so when checked, it copies that name and associated data in to a section below. This will give me a reduced list of names (lets say 20). From this section I would like the same again to reduce further and once more after that.

View 9 Replies View Related

Copy One Cell To Another Of Different Worksheet And Retrieve Again When Selecting Round X

May 12, 2014

I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"

View 1 Replies View Related

Selecting The Rest Of The Current Column Then Copy To Another Worksheet

Jul 11, 2006

I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?

Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................

View 8 Replies View Related

Error Code Selecting Block Of Data From Worksheet?

May 3, 2014

I am trying to select a block of data from a remote worksheet but I keep on getting the following error

Run time error '1004':

Application-defined or object-defined error.

I have attached the file and I am working on worksheet 21 "PT Monthly Report 1"

View 7 Replies View Related

Copy Between Worksheets Doesn't Work (look For A Certain Value In Worksheet A And Copy That Row Of Data To Worksheet B)

Apr 13, 2009

look for a certain value in worksheet A and copy that row of data to Worksheet B.

However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?

PHP Private Sub GetInfo_Click()
    Dim r As Long, LastRow As Long, Status As Integer
    Dim Message As String, Title As String, Default As String, MyValue As String
    Application.ScreenUpdating = False
    
    MyValue = Range("A4").Value
    Workbooks("invoice.xls").Worksheets("A").Activate
    LastRow = Range("C65536").End(xlUp).Row
    For r = LastRow To 1 Step -1
        If Cells(r, 1).Value = MyValue Then
            Rows(r).EntireRow.Copy
            Workbooks("invoice.xls").Worksheets("B").Activate
            Rows("8").Select
            Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
        :=False, Transpose:=False
            Status = 1
            Workbooks("invoice.xls").Worksheets("A").Activate
            Rows(r).EntireRow.Delete
            
            Exit For
        End If
    Next r
    Application.ScreenUpdating = True 

View 2 Replies View Related

Selecting All Data In Specific Columns Without Selecting Adjacent Column

Mar 10, 2014

Using VBA, I need to Select A1:C14.

The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.

So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)

Obviously, this is an example...the real data set is an export and varies in size.

View 1 Replies View Related

Copy Data From One Worksheet To The Alternate Line In Another Worksheet

Jun 19, 2013

I would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.

1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.

2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.

The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.

View 2 Replies View Related

Copy Worksheet Data In Userform To Worksheet?

Oct 24, 2011

I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.

The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.

code so far:

Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet

[Code]....

View 2 Replies View Related

Copy Selected Data From Worksheet To Different Worksheet

Jan 16, 2008

As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.

Note:

1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.

View 3 Replies View Related

Selecting A Worksheet

May 29, 2009

The main worksheet is for buttons to select emergency type and what group should be notified. Subsequent sheets will have different sets of contacts - Col A= Name, Col B = email address, Col C = Yes/No indicator.

The basic code works great as long as the names are on the primary worksheet. When I try to point the code to a different worksheet, the result displayed in the MSGBOX is null. I did this by putting "Worksheets(Sheet2)." in front of "Columns("B")." I double checked the sheet name.

View 2 Replies View Related

Selecting Worksheet Name Contains

Jun 9, 2014

I have a macro that my coworker runs weekly to update info. The macro depends on data in a workbook that comes from another source who arbitrarily decides to rename things. I put into my code a 3 situation scenario.

1. If the sheet name = what it is supposed to then activate it
2. Else If the sheet name contains the word "Pivot" then activate it
3. Else load a userform that lists the worsheets in the workbook and allows the user to select the proper sheet.

The code I have is below. It works until I introduce the 3rd option. Is "Else" not the proper syntax here? Because when I run it, it jumps straight to the "Else" statement and loads the userform even if the sheet is named correctly or contains "Pivot" in its name.

Code:
Sub FindPiv()
Dim strWSName As String
Dim s As Worksheet
For Each s In ActiveWorkbook.Sheets

[Code] .......

View 6 Replies View Related

Selecting The First Worksheet

May 14, 2006

is there a way to actually just select sheet1 on the workbook, bearing in mind the actual name of this sheet may vary

View 2 Replies View Related

Sort Data And Auto Copy Sorted Data To New Worksheet While Maintaining WS1

Oct 7, 2013

I have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?

View 3 Replies View Related

Macro To Copy And Paste Auto Filtered Data To Existing Worksheet Below Previous Data

Oct 18, 2013

I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.

I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.

The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:

Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)

[Code] .....

View 6 Replies View Related

Copy Data With Criteria For Worksheet And Data Range

Oct 17, 2012

I have a workbook with 3 sheets

Sheet1 - TeamList - Column A is a list of all the team leaders which is used to create a new worksheet for every team. Col B is blank. Column C, D, E are the team lists where teams can consist of anywhere from 10-25 employees.

For example
Column A
Column B
Column C
Column D
Column E

Team Leaders

Team Leader
Employee
Pin

TL 1

TL 1
Emp 1
10001

[Code] ......

Sheet2 "RawHours" A raw data sheet that contains employee hours information

For Example
Employee #
PIN
NAME
Reg
OT
TRN
Stat
Sick
Vac
Berv

2000100
10001
Emp 1
24.00
0.00

[Code] .......

Sheet3 - Template

Basically what I want to be able to do is create a sheet for every team leader and copy and paste there team into the appropriate sheet.

I have the sheet create done by simply copying the template and renaming each sheet using the Team Leaders list from column A from the TeamList sheet. And then I copy the page setup information using the template as well but when it comes to pulling over the appropriate team members in to the appropriate sheet I can not seem to wrap my head around it.

Below is the current code I am using:

Code:
Option Explicit
Sub CreateSheet()
Dim LR, i As Long
Dim shCount As Integer
Dim Sh As Worksheet
Dim Cell As Range
Dim CpySht As PageSetup

[Code] ........

View 3 Replies View Related

Selecting A Worksheet Based On Cell Value

Mar 5, 2009

I am trying to automatically select data from a different sheet to fill data in a cell based on two other cells. I've attached a simplified version of what I'm trying to do (with detailed explanations). I hope it has enough info to get my point across.

I posted this in the "programming" forum because I'm pretty sure I will need to use vba in some form or fashion to get this to work. I am more familiar with access than excel, so I may be missing some easier way to make excel do this.

View 3 Replies View Related

Selecting Custom Tab Order On Worksheet?

Jan 23, 2014

Is there a way of selecting a custom tab order on a worksheet?

I want to create a tab order of C12 - H12 - M12 - R12 - W12 - C13 - H13 - M13 etc

it only seemed to create the tab order for a certain number of cells. Is there a way of doing it any number of cells?

View 5 Replies View Related

Selecting A Worksheet By Relative Reference

Mar 7, 2007

I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like

=worksheet10!f2

where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".

View 9 Replies View Related

Searching For Text Within Worksheet And Selecting The Cell

Feb 17, 2014

I'm using a command button (p1) within Private Sub P1_Click()

It pulls the activecell as a string (for example $A$1) using a variable called CurrCell, I then want to search this string (currCell) within the worksheet "DATA" and select the cell 3 to the right of it, so that I can change the value.

View 1 Replies View Related

VBA Code For Selecting Specific Cells Within Worksheet?

Aug 28, 2013

know the VBA script to select only specific cells within a worksheet. To be more precise, on sheet 1 - A2, A6 and A10 cells are filled with red color. I want only those cells which are highlighted in red to be selected, copied and pasted to sheet2.

View 3 Replies View Related

Copy Data From One WorkSheet To Another

Sep 11, 2013

I have a worksheet(named A) where in some cases an additional WS needs to be filled out with some of the same data. I have a button that opens this new Worksheet (named B) and in the fields that are the same I use the formula,=IF(ISBLANK(A!D10),"",A!D10), to copy the data from WS A to WS B.

The problem is that these worksheets are copies of originals so that the orignal never gets altered. So when you go to import the data the WS that is opened is A (2) and B (2) and as a result nothing imports because the formula is looking at WS A not A (2).

Is there a way to make this work so that worksheet A (2) will go to B (2), A (3) will go to B (3),...

View 9 Replies View Related

Copy Data From 1 Worksheet To Another

Aug 27, 2008

I have a worksheet with column a-e. Column e has data that says it is either closed or open. I was wanting to run a macro that would move the entire row that has the work closed in column e# into another worksheet also named closed. Please see the below for example;

A B C D E
1 # # # # closed
2 # # # # open

So basically I would like to move the data from row 1 into a the worksheet name closed.

View 9 Replies View Related

Copy Data From One Worksheet To Another

Feb 15, 2007

What i've got is a spreadsheet that has a number of two worksheets one called premiership and another called stats, what i do is get data from 2 different websites and put that on stats worksheet by importing it.

Now this where it gets complicated, in stats when the data is download i wont to copy three cells to a specific location in the premiership worksheet. So in the stats worksheet, whats in column A and E needs to match whats in B and C in premiership and then copy information from cells in B,C,D in stats to cells in premiership G, H, I. AT this moment in time i do it manually, can this be done?

View 6 Replies View Related

Selecting Specific Worksheet Immediately Stops Macro

Nov 15, 2013

Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.

Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.

View 1 Replies View Related

Populating A Worksheet After Selecting A Drop Down List Entry

Aug 31, 2009

I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.

On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.

View 2 Replies View Related

Code To Prevent Editing & Selecting Of Range Worksheet

Sep 3, 2008

I have the following code that Ger Plante very kindly helped me with which, depending on whether there is an 'x' by someone's name in a list, creates a new workbook, copies some information to it and saves it before moving on to the next 'x'. Loop Through Rows & Copy Each Row To New Workbook

For lLoop = 2 To 251 'first row of data to last row.
If ws1.Cells(lLoop, 4).Value = "x" Then '4 = Column D
ws1.Activate
ws1.Range("e" & lLoop & ":g" & lLoop).Copy
ws1.Range("B1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=True
Rng1.Copy
Workbooks.Add
ActiveSheet.Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteColumnWidths, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
ActiveSheet.Range("A1").Select
ActiveSheet.SaveAs varPath & "Student Data Files" & ActiveSheet.Range("B1") & ".xls"
ActiveWorkbook.Close

Else
End If

Next lLoop

how I can modify the code such that any cells in the range "b1:b504" in Sheet1 of the the new workbook can't be selected or edited without a password....I have tried unsuccessfully using Protect but am not sure how to get vba to set it to specific cells and determine exactly what is allowed in those cells.

View 5 Replies View Related

Copy Data To Another Worksheet But With Different Format

Nov 9, 2013

What I'm trying to do is to copy my data to another work sheet but with the different format like column to row..

item CODE
item DESCRIPTION
Cost
store 1
store2
store3
store4
store5
store6
store7
store8

[Code] .....

It includes formatting of column into row (store name,qty)

Store Name
Item Code
Item Description
Quantity
Price
Total Amount

Automatic it has total amount

store1
0003
item1
3
46.80
140.4

It will skip the column that has no value(empty cell) and will not transfer it into row

store5
0003
item1
2
46.80
93.6

[Code] .....

View 9 Replies View Related

Data To Copy To Next Worksheet In Workbook

May 30, 2009

in my workbook i have 13 sheets, in one of the rows at the top of each sheet is a spot to put a name.

i would like to only have to put in the row on the first sheet and have it add the input to all sheets in the same row. how do i do that?

View 3 Replies View Related

Copy And Link Data From One Worksheet To Another

Aug 14, 2013

This is what I have now. YTD_annual_interest earned_3.xlsm

When you click the "update Workbook" button, it creates new tabs using the names in Column A5 through A29. If you look at the tabs named John Jones and Phil Williams, you see what I want to happen once the tabs are named. If you look at Mary Smythe, and the rest of the sheets, this is what actually happens.

My question is two fold.

1. Can the sane button be used to grab and copy the data in the corresponding rows as the named tabs? If no, how can that be done?

2. I want to populate the new sheets with the data as in the John Jones, and Phil Williams sheets automatically.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved