I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
View 1 Replies
I suspect this is extremely basic however how do I do the following in VBA? I have dataset with a column having a row of numbers as: 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, etc. What I want to do is copy some information designated by the first 1 then the first 2 then the first 3 to another worksheet leaving the other data. How do I selectively choose the first of the 1, 2 and 3 etc.
View 1 Replies View RelatedI would like to create a spreadsheet where I enter a list of 30 – 40 names and associated data over 4 separate columns. I would like the option of having a check box next to each name so when checked, it copies that name and associated data in to a section below. This will give me a reduced list of names (lets say 20). From this section I would like the same again to reduce further and once more after that.
View 9 Replies View RelatedI have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
I am trying to automatically select data from a different sheet to fill data in a cell based on two other cells. I've attached a simplified version of what I'm trying to do (with detailed explanations). I hope it has enough info to get my point across.
I posted this in the "programming" forum because I'm pretty sure I will need to use vba in some form or fashion to get this to work. I am more familiar with access than excel, so I may be missing some easier way to make excel do this.
I'm using a command button (p1) within Private Sub P1_Click()
It pulls the activecell as a string (for example $A$1) using a variable called CurrCell, I then want to search this string (currCell) within the worksheet "DATA" and select the cell 3 to the right of it, so that I can change the value.
Is there a way to set up a cell so that when you click the cell, the cell’s value is automatically copied to the clipboard?
Example:
A1 = “1”
A2 = “2”
A3 = SUM(A1:A2)
Can you set up cell A3 so that when you pick it with your mouse, “3” is copied to the clipboard ready for you to paste elsewhere?
I have tried searching through the forum to find an answer but nothing has come up.
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
I have a workbook with 2 sheets containing data in many columns in Sheet1 as well as Sheet2. I need to compare Sheet1 data in column F with data of Column C in Sheet2.
If column F in sheet 1 matching with Column C in Sheet2 then retrieve the value of Sheet2 Column B,C,D & E to show in Sheet1 H, B, C & D respectively. I have attached the Excel workbook.
I need a macro that will ask for a crew # and then select all the rows off another worksheet that contains that crew #. Then take the selected rows and copy them to the active worksheet for reporting.
Possible?
I need to retrieve the name of a worksheet for a product.
Example
Workbook1 contains the Product number in column A, i want to enter a formula in column B that will search column A in all the worksheets in workbook2 for that product number, and retrieve the worksheet name that the product number is in
Is there any way to retrieve all the macro names in a worksheet?
View 2 Replies View RelatedI have two worksheets, in worksheet1 i have a table containing two columns, " names" and "projects". In worksheet2 is where I ask for the name of the project. How do I retrieve all the "names" in worksheet2 that have the same "project" to worksheet1.
I know I made a similar thread in here, but that one was answered quite quickly. Then I learned that my question was written quite wrong and so the answer didn't help me much. I thought about rephrasing the question, but I read that this is a one question on one thread forum.
I don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
In column A I have client names and columns B to P I have numerical data and in column Q I have a formula which gives me a percent, i am trying to think of a way/ a function that will return for me the client names when the value in Column Q is >=100%. It seems like it would be some type of reverse Vlookup.
View 4 Replies View RelatedI would like a formula to lookup a value across worksheets and if found return the worksheet name that coresponds to that value. I do have this formula below but it will not retrive the correct worksheet name if there are duplcates values.
=INDEX(WSLST,MATCH(TRUE, COUNTIF(INDIRECT("'"&WSLST&"'!B2:B9"),B2)>0,0))
So I tried to use the define names formula method:
Col_B =N(INDIRECT("'"&XWSLST&"'!B"&(2+MOD(S,N))))
N =8
S =ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1
WSLST =Sheet1!$A$2:$A$3
XWSLST =T(OFFSET(WSLST,INT(S/N),0,1,1))
and modified the formula into this manner: =INDEX(WSLST,MATCH(TRUE,COUNTIF(Col_B,B2=S)>0,0),COUNTIF(B$2:B2,B2))+1
I left a sample workbook below that in column E are the values that I'm expecting.
I need to query a master spreadsheet and pull out all the rows on it that have the same name as I have in cell A1 of my spreadsheet
e.g.
Myworkbook, sheetname = queries
Cell A1 = "ABC"
The Macro queries the "test Data" workbook (c:myfolder estdata.xls) "sheet x" and looks in column A for ABC, if it finds ABC it will copy the row and paste it into Myworkbook, sheetname = queries. There are often several rows of data that need to be copied that all have "ABC" in column A.
Also, in column B of the test data workbook, is a number, the highest value denotes the "version" of the data, the highest number is always the latest version of data that should be retrieved, e.g. if 9 the highest value in column B then all data that has ABC in column A and has 9 in column B should be retrieved, all other records should be ignored.
I guess this is a sort of a macro loop but not too sure how to do it.
I need to move data from "2010" page to page "sheet 1 (2)" so I don't have to double chart.
I want to be able to retrieve data in columns w, x, y, z, ac, and ad, on page 2010 and place them respectively in coloumns I - N on the correct row. (the row that matches the right name)
I dont' know how to do this-I don't know if it complicates things that 2010 has breaks in the data (each month has totals and are broken up. ) can anyone help?
I believe I have xcel 2003 if it matters.
I use a CommandButton on a UserForm to copy the contents of 12 TextBoxes into the last row on a sheet. I am getting numbers with too many places. I tried to use Round(), but it is not working.
Here is the original With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i).Value = Me.Controls("TB" & i + 4).Value
Next i
End With
This gives me all of the decimal places.
Here is my attempt to use Round():
With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i).Value = Round(Me.Controls("TB" & i + 4).Value)
Next i
End With
This gives me a type mismatch error.
My outlook may received an email from a sender [URL] I have to create an excel template something like below:
No
Date
Email/Sender
Body Message
1
25/12/2013
anyone@email.com
This is to record how many emails I received from the forwarded email [URL].
This is also for the next step we need to follow up with the sender.
Is there any way to make it more easier to make this records others than manual record.
The main worksheet is for buttons to select emergency type and what group should be notified. Subsequent sheets will have different sets of contacts - Col A= Name, Col B = email address, Col C = Yes/No indicator.
The basic code works great as long as the names are on the primary worksheet. When I try to point the code to a different worksheet, the result displayed in the MSGBOX is null. I did this by putting "Worksheets(Sheet2)." in front of "Columns("B")." I double checked the sheet name.
I have a macro that my coworker runs weekly to update info. The macro depends on data in a workbook that comes from another source who arbitrarily decides to rename things. I put into my code a 3 situation scenario.
1. If the sheet name = what it is supposed to then activate it
2. Else If the sheet name contains the word "Pivot" then activate it
3. Else load a userform that lists the worsheets in the workbook and allows the user to select the proper sheet.
The code I have is below. It works until I introduce the 3rd option. Is "Else" not the proper syntax here? Because when I run it, it jumps straight to the "Else" statement and loads the userform even if the sheet is named correctly or contains "Pivot" in its name.
Code:
Sub FindPiv()
Dim strWSName As String
Dim s As Worksheet
For Each s In ActiveWorkbook.Sheets
[Code] .......
is there a way to actually just select sheet1 on the workbook, bearing in mind the actual name of this sheet may vary
View 2 Replies View RelatedIs there a way of selecting a custom tab order on a worksheet?
I want to create a tab order of C12 - H12 - M12 - R12 - W12 - C13 - H13 - M13 etc
it only seemed to create the tab order for a certain number of cells. Is there a way of doing it any number of cells?
I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like
=worksheet10!f2
where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".
know the VBA script to select only specific cells within a worksheet. To be more precise, on sheet 1 - A2, A6 and A10 cells are filled with red color. I want only those cells which are highlighted in red to be selected, copied and pasted to sheet2.
View 3 Replies View RelatedI get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets.
sheet1.jpg
sheet2.PNG
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.
Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.
I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.
On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.
