know the VBA script to select only specific cells within a worksheet. To be more precise, on sheet 1 - A2, A6 and A10 cells are filled with red color. I want only those cells which are highlighted in red to be selected, copied and pasted to sheet2.
View 3 Replies
Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.
Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.
How to get Excel to select all cells within a specific column that contain a specific character. In this instance, I need to select all the cells which contain a comma...
And even better would be if I could get Excel to not just select all the cells in a specific column containing a comma, but each of the rows in which those cells reside.
I am trying to select a block of data from a remote worksheet but I keep on getting the following error
Run time error '1004':
Application-defined or object-defined error.
I have attached the file and I am working on worksheet 21 "PT Monthly Report 1"
I have the following code that Ger Plante very kindly helped me with which, depending on whether there is an 'x' by someone's name in a list, creates a new workbook, copies some information to it and saves it before moving on to the next 'x'. Loop Through Rows & Copy Each Row To New Workbook
For lLoop = 2 To 251 'first row of data to last row.
If ws1.Cells(lLoop, 4).Value = "x" Then '4 = Column D
ws1.Activate
ws1.Range("e" & lLoop & ":g" & lLoop).Copy
ws1.Range("B1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=True
Rng1.Copy
Workbooks.Add
ActiveSheet.Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteColumnWidths, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
ActiveSheet.Range("A1").Select
ActiveSheet.SaveAs varPath & "Student Data Files" & ActiveSheet.Range("B1") & ".xls"
ActiveWorkbook.Close
Else
End If
Next lLoop
how I can modify the code such that any cells in the range "b1:b504" in Sheet1 of the the new workbook can't be selected or edited without a password....I have tried unsuccessfully using Protect but am not sure how to get vba to set it to specific cells and determine exactly what is allowed in those cells.
I have to correct a spreadsheet that takes a bunch of values and creates an average.
=average(N15;N29;N43;N57;N71;N85;N99;N113;N127;N141;N155;N169;N183;
N197;N211;N225;N241;N255;N269;N283;N301;N315;N329;N343;N357)*100%
I didn't create this. Anyway, the problem is that most of these cells will be empty unless a whole bunch of other stuff is filled. These N cells take several values, put them together and create a new one. As time goes by they are filled. While they aren't filled, they'll return the DIV/0 error.
So when that formula I pasted there uses all of these values, it also returns a DIV/0 error because it is getting info from cells that have this error.
I managed to correct that with this
=averageif(N15:N357;"<>#DIV/0!")*100%
It works like a charm save for one problem. When I use averageif I'm forced to use an interval. Along this interval other values show up (it is always a value ranging from 0 to 2). So when the formula works its magic the results are slightly skewed because of this other value that I don't want.
So I figure there must be two ways around this. The first one would be using something like averageif that lets me use several handpicked cells instead of an interval. If I try
=averageif(N15;N29;N43;N57;N71;N85;N99;N113;N127;N141;N155;N169;N183;
N197;N211;N225;N241;N255;N269;N283;N301;N315;N329;N343;N357;"<>#DIV/0!")*100%
It doesn't work, it says I have too many values. So if I could the exact same thing as I did with averageif but keeping all of these values it'd be super nice.
The other solution, less nice but equally effective I guess, is using this same interval but having more than one criteria. The first criteria would still be the one telling it to ignore DIV/0 error, the second criteria would be the one to ignore any values equal or lower than 2.
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I have a number of different modules. Each module does something similar, but different to a specific workbook. Instead of running the macro(s) individually is it possible to have a parent-class that calls on each module, and further to have each module *know* which worksheet it should apply to?
Example below:
Code:
Sub Cost_Center_Information_File()
'What it does: applied to a worksheet (there are about 15 worksheets in the workbook) it
'will do some formatting manipulations.
[Code].....
I would like the following code to be run for all those sheet/s that has a name = "single" (Not case sensitive neither an exact match) of my active workbook.
Code:
Sub UIUIUI()
Dim LR As Long, i As Long
LR = Range("I" & Rows.Count).End(xlUp).Row
For i = 1 To LR
With Range("I" & i)
If .Offset(, -1).Value = 1 Then .Value = .Value & "-"
End With
Next i
End Sub
I have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping:
Sub FormattingAcutalReport()
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls"
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls"
Dim myBorders() As Variant, item As Variant
Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
The issue is the I want to put the condition here in my the code that only copies the desired cells if the sheet is named specifically such as "Jan", if not named as this the worksheet should not be used. The current code I am using was posted on this site in 2009: VBA to copy specified cells from all the files in a folder
My modified code is:
Option Explicit
Public strSourceFldr As String
Public EachFile As Object
Public objFSO As Object
Public objFolder As Object
Public objFile As Object
Public strSheetName As String
[Code] .........
I wanted to ask how to delete a specific range of data in a cell range using VBA
Here is a snipit of code I currently have:
Sname1 = Sheets("Numbers").Range("FX3").Value 'FX3 = cell F starting column letter
Range(Sname1 & Range("FR7").Value).Select 'FR7 = row number
If I added the following:
Sname2 = Sheets("Numbers").Range("FX4").Value 'FX4 = cell n ending column letter
Changed the code to the following: obviously this code is incorrect below:
Range(Sname1 & Range("FR7").Value) : Range(Sname2 & Range("FR7").Value).Select
I am trying to write a VBA code in excel to delete any columns when a cell in that particular column = 0 (zero). That cell would start at B19 and subsequently follow to C19, D19 and so on.
View 9 Replies View RelatedI have a workbook with multiple worksheets. On some of those worksheets a have merged cells, so in order to paste new data I need to unmerge them first. Below is the code that I wrote for it. However it doesn’t work and returns “Run-time error '1004': Application-defined or object-defined error”. I looked at this post List Maximum Value From Each Worksheet and tried adding With – End With, but it failed too. As far as I understood the problem is that the Worksheets/Sheets object does not support UnMerge property, but I may be wrong. If I add ws.Activate line (test2) everything works fine.
However I was wondering if there is a way to do it WITHOUT activating the worksheets.
Sub test1()
Dim i As Integer, ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Select Case ws.Name
Case "5 - Top Network Facilities", _
"5b - Top Arb Facilities"
For i = 0 To 9
ws.Range(Cells(2 + i * 5, 1), _
Cells(6 + i * 5, 1)).UnMerge
Next i
Case Else
End Select
Next ws
End Sub
I'm creating a simple program that copy one or more specific cell values and place it on a specific cell in another sheet using loop to make it easier... I'm having a difficult time trying to figure it out..
Example
from sheet1 A1:A5
Sheet1
A | B | C
1 P45
2 P46
3 P47
4 P48
5 P49
and place P45, P47 and P48 on another cell, to be specific in C1,C2 and C3, in a different sheet
Sheet2
A | B | C
1 P45
2 P47
3 P48
4
I am looking for a macro which will take specific data from one sheet to the 2nd. I have attached the sheet. The Input data in the 1st sheet and the consolidated dat ain the 2nd one. Kindly assist. In the Final Sheet:
The Description column shld contain the data from B7:C7 and the B10:C10 together in one cell and that shld be copied till the end
The Description (Design steps) and Expected Result coulmn shld take data from the Test Step Description and Expected Result. And the Step Name shld be counted automatically till the last input. Test Name column shld be the 1st woksheet name.
I'm trying to "export" data from a static ws "order" (Sheet2) to a selected (active) worksheet. This will happen with 15 different (random) cells.
I got this far but the copying isn't happening from the correct sheet or going to the active sheet. The data in "G5" on "order" should go to the first unused row on the active sheet. What I got was backwards.
Once I get the first one to work I can finish the code for the other 14 cells. I appreciate getting pointed in the right direction
Select Specific Cells And Transfer This Data Into A New Row In A Different Worksheet, how can I do this in a macro?
I am trying to pull a select 6,048 rows out of 288,000 rows.
I am trying to select specific cells and transfer this data into a new row in a different worksheet. The code i am using i used sucessfully on a user form to take the entries from text boxes and place in a row in a new worksheet. I would like to try and do the same thing but on a worksheet rather than a user form. My code is
View 2 Replies View RelatedI have created one-dimensional array and now I try to copy the data from array to some specific Cells in worksheet. But it seems impossible all the time!
Sheet2.Cells(56, 3 + m) = LossLocationInt(m)
NB: LossLocationInt(m) is an array containing value in it. But, this doesn't copy to the Sheet2.Cells(56,3+m). For clearness: the array has type variant
I have a spreadsheet with Employee details and each employee has a Indicator and a Score.
I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I'm trying to clean-up a huge bulk of data. What I want to do is automatically select all rows, where column K contains text value "Closedloss", and have all these rows cut/pasted to Worksheet "ClosedCases". The second is similar to the first, but I want to select all rows where column J contains a value of 60-80, and have all these rows cut/pasted to Worksheet "MidRange".
View 2 Replies View RelatedI'm trying to find the best solution for this problem. I have an excel sheet that contains over 2,000 rows of data with 8 columns. In this sheet, I need to be able to select entire rows that look for specific names in column E which is titled "originator".
The name format looks like this:
Selzer, Paul (TEM)
Wathen, Charles (TEM)
Chapman, Steven (TEM)
etc
I have a total of 15 names that I need excel to look for in this entire sheet. What are my best options for this? I tried conditional formatting, but that does not work that well, as I would have to manually enter in each name.
I'm using Excel 2003 and I have a small problem using text functions. My problem is that in column 'A' I have a name and their year next to it between brackets, like so: Wright Jeffrey (1PBSO)
Now what I have to do, is make two new columns where I extract the surname (Wright) to one columns and the first name in another column (Jeffrey), the "(1PBSO)" doesn't have to go anywhere. Now I wouldn't have a problem with this normally but in the list I have names like 'Van Tongerloo Johan' where VAN TONGERLOO is the surname and JOHAN is the first name. For the first name (Wright Jeffrey (1PBSO)) I just used the LEFT function and then searched for the first space in the string but that doesn't work in the second example anymore.
I am looking for a way to select specific columns in excel that have specific characteristics in the header titles. For example, I have a very large worksheet with columns that specify the year and month (ie. "1900-8"). The years range from 1900 to 2011 and each year has "-1" to "-12" to represent the months of the year. Specifically, I am wanting to pick out all of the columns ending in "-8" (August).
View 14 Replies View RelatedI have a output file that is collected time stamped data. How do I select the rows of the first time stamped collection. So, if the first row is stamp with 03-Jan-2009 23:59:00, I want to copy all the rows with that time stamp below the first row and stop when the time stamp starts at 03-Jan-2009 00:00:00. Attached is my sample sheet.
View 4 Replies View RelatedI have a Lookup table with a Group and Subgroup field. I have created a range for the Group and also for the Subgroup. On my main page, I have created a list option which allows the user to select the items under Group (Day, Colour and Time).
What I want next to do is based on the primary selection for Group; I want it to filter it on the specific Subgroup. For Example,
The User selects Colour from Group, the Subgroup will subsequently only show the appropriate selection which is Green, White and Yellow, and no further selection.
I have x number of sheets in a workbook, and I am looking to copy sheets a, b and c into a new workbook that I will create.
The a, b and c are in no order, or consecutive (although they could be). I want to be able to count the number of sheets in the workbook, and traverse through that to find sheets that I need, and select them to copy over to a new workbook.
is there any way to open a workbook and select a sheet within the book without having the entire name?
I've got a unique workbook and worksheet identifier but don't know how to use wildcards to get my macro to open the right workbook.
I have a worksheet which is used by multiple users at the same time, at the end of the day I can have upto 10 files. The layout of all the files is the same, same number of columns and rows, the only difference would be the file name eg:Test1.xls, Test2.xls etc. information in test1.xls will not be any other file. At the end of the day, these files are emailed and saved in a particular folder.
What I need is get information from all the files saved in a particular folder and keep columns which have data. Additionally, if there is no data for any columns after combining the columns to display an alert. The final file should have information with only data in individual columns and arranged in the order such as Center 1, center 2, Center 3
Eg:test1
Column A Column B Column C.....upto 30 columns
Center 1 Center 2 center 3....upto 30 centers
1 4
2
3 5
test2.xls
Column A Column B Column C.....upto 30 columns
Center 1 Center 2 Center 3.....upto 30 centers
5
The final file will look like this
Finaltest.xls
Column A Column B Column C.....upto 30 columns
1 4 4
2 5
3 5
