Show Sum Of Numbers In One Column IF Another Column Has A Specific Category
Apr 28, 2009
I have a worksheet which basically tracks time. the time is reported in Column C. In that row in Column E, there is a validation list with about 6 different categories in it. On the side of this "table" I have a list of all the categories and I want a value to be next to it that reports the sum of time (C) for each category (E).
So for the "Routing" category, I would want the value to be the sum of just data on the timesheet that have "routing" in Column E.
The list columns 5,7 and 9 has number entries.The userform has 3textboxes.is it possible to link total amount of this numbers result into the textboxes.Like column 5"CZ" entries total will showup in textbox10,column 9"DD" = textbox14
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean) Dim a, i As Long, ii As Long, b(), n As Long ListBox6.Clear With TextBox2 If .Text = "" Then Exit Sub If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then MsgBox "No Entry !" TextBox2 = ("") Exit Sub..........
I'm trying to build a function, but I haven't been able to successfully navigate some of the eccentricities of Excel formula-building.
Right now I am working on counting all of the cells that contain numbers (so likely just a =COUNT function), but will be eventually getting other descriptive stats as well. My problem is that I would like to create a formula that will perform the counting/mean calculation, etc., but only on a specific column that has the header cell that contains several specific words. Rather than having to type in the target words for each column, I would like to have the target words in the function be imported from multiple designated cells.
For example,
I want to find how many numbered cells are found in column E headed as "dog brown," but I also have columns headed as "cat brown" "dog black" etc. (which I will be using the formula on later) to paint a small picture, in my descriptive table, "dog" is in B31 and "brown" is in C30, then "cat" in B32 and "black" in D30.
I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken Cow Donkey Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
My macro's function is to paste the workdays of an entire month in a specific row of a worksheet. Everything seems to work except using a number to reference the column in which to store the values. I've searched the web for over an hour and found two "solutions":
1. write a function to convert column number to a letter 2. utilize Cells object
#2 seemed more efficient but the function is giving me the error: "Runtime Error: '1004': Method of 'Range' of object "_Worksheet' Failed"
One has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
I am having a small problem with microsoft excel 2007.the problem is that: my excel 2007 cannot display tooltip of the column width when I keep and drag left mouse
Show tooltip of the column width as attached file.
I also tried many ways to find settings of advance menu. But cannot.
I am trying to figure how to show in one pivot table a current column and a proposed column. I have 15k rows of data. My data columns are employee, month, task, hours, proposed month. I can get a table that has months as columns and tasks as rows with sum of hours. What I would like to do is incorporate the proposed month, so that it shows hours in the months by current and proposed. That way my result would be January current, January proposed columns etc. I can change the propsed months by formulae so I want to play with the proposed task month the refresh the pivot table to see the results.
I am creating a spreadsheet that allocates hours to different categories of work - for example, "Fire Protection". I need the allocated hours for all of the different Fire Protection duties to only show up when a value greater than zero is entered in the column at the top of this category entitled "Fire Protection". If "Fire Protection" has a value of zero, then all fire protection-related duties will automatically be zero as well - in effect, this category of hours is nullified.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
How would you set up a macro to delete numbers in a spreadsheet in one column that appear in another column or worksheet?
In other words, if I have the numbers 1,2,3,4,5,6,7,8,9, 10 in one column and in the same column, or another column or worksheet I have the numbers 1,2,3,4,5 - I need a way to delete 1,2,3,4,5. I know how to delete duplicates via the advanced filter but I want to have the duplicate and original deleted.
Column A contains numbers 0, 2, 0, 0, 5, 6, 0, 8 (in cells A1 - A8 respectively) Can I write a formula to make column B contain only the non-zero numbers (2, 5, 6, 8 in cells B1 - B4 respectively)?
I have a spreadsheet which will be completed by numerous users, with a worksheet reserved for each area. The spreadsheet is to record the number of days lost to training etc on a weekly basis.
Each worksheet has 3 columns – column A DESCRIPTION, column B WEEK COMMENCING DATE and column C DAYS LOST.
The table will be completed by the manager’s as the info becomes available to them.
I will be collating the data on another worksheet and need a formula that will look in column B for all instances of 01/10/07 and then sum the corresponding cells in column C, then do the same for 08/10/07 and so on.
I have attached an example of a page.
I thought it may be VLookup or Sumif, but I don’t know how to go about it.
I have a name in one column and the data in another. I am trying to match the name and the category and turn the column data into a row data. I have attached a sample of two sets of data since my explanation here may be lacking. Orriginal data is in columns A and B. Basically I think I need a double text lookup (matching the name and category) and put the data in a row format.
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
I have a row (will always be row 3) where each cell contains a day of the week, the days repeats for a year or so, making the row almost 400 cells.
Like this, Mo - Tu - We - Th - Fr - Sa - Su - Mo - Tu - We - Th - Fr - Sa - Su - and so on...
Though, A3 doesn't have to be "Mo" because the days in this case can change (A3 can start with "Tu"), hence I think I need a macro.
So if this row contains a weekend, "Sa or "Su" I want all the cells in the column beneath that which contains a specific value to be cleared.
Example, if "Sa" or "Su" has 3 values in the columns under them, all the values that contain "X" or "Y" has to be cleared.
Like this: Rows (1,2,3...,) 1---- 2---- 3 Mo - Tu - We - Th - Fr - Sa - Su - .. and so on.. 4 A --- B --- X --- Y --- X --- B --- Y 5 A --- B --- X --- Y --- X --- X --- X 6 A --- B --- X --- Y - --X --- Y --- C
After the macro it should be:
1---- 2---- 3 Mo - Tu - We - Th - Fr - Sa - Su 4 A --- B --- X --- Y --- X --- B --- 5 A --- B --- X --- Y --- X --- --- 6 A --- B --- X --- Y - --X --- --- C
Currently I am using the Kickbutt VBA Find Function of Aaron, but I would like to have something that works more efficiently. What I currently do is (assuming all possible values for Column J are A - F):
although I just want some code that says: delete all rows except those that have "F" as content in Column J. I already tried something like:
Range("1:65536").Select For Each cl In Range("J:J") If cl.Text = "A" Or cl.Text = "B" Or cl.Text = "C" Or cl.Text = "D" Or cl.Text = "E" Then Rows(cl.Row).Delete End If Next
but it also takes much to long. The major problem I think, is that the number of records is variable so I search the entire worksheet...
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
