I want to do is sort in ascending sequence, a range defined as rTrainRow which is a row of text data. Each cell in the row can contain space, blank, one Alphabetic character or a special character such as $, %, (, +, etc.
View 2 Replies
I am trying to sort a column of data in ascending order but I am not getting the results I expect. An example of the data held in the cells is:
4972-1A
4972-10A
4972-2A
4972-1B
4972-3C
When I sort it in ascending order it sorts like:
4972-10A
4972-1A
4972-1B
4972-2A
4972-3C......................
Need code for automaticcally sort data in ascending order any time there was a change in score. The names column is b1:43 and the corresponding score would be in column c1:43. I can't seem to do it.
View 9 Replies View RelatedCreating a sequence in every column? It should look like this:
Original matrix (Top left cell is "A1"):
40 50 60
30 10 20
70 20 0
And I want to replace it with:
2 3 3
1 1 2
3 2 1
I need to create an ascending sequence of numbers in every column. First column contains: 40, 30, 70. That's why its ascending sequence is: 2, 1, 3.
Btw, I got N rows and M columns.
Excel 2007.
The first part of this code is fine and completes all the borders.
The second part is to the all the workbook by Data Sort in ascending order starting with
Column C
Then Q
Then column V
But also knowing to search to the last line. I think i might be close but not close enough for this to work.
Sub Macro2()
Dim LR As Long, i As Integer
Dim mysheet As Worksheet
Sheets("Test").Select
LR = Range("A" & Rows.Count).End(xlUp).Row
With Range("A9:AD" & LR)
[Code] .......
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
Essentially i get a Runtime 5 error on the bold bit of code....
I am trying to define a range .... by using thexlUp function find the last row ( which works ) i then pass this variable into the sort code and get the error its probably very simple to fix, all it does i sort columnA but finds the last cell .... instead of the whole column,,,,
Sub Macro7()
'
' Macro7 Macro
'
' Keyboard Shortcut: Ctrl+e
NumberOfRow = Sheets("Sheet1").Range("A3000").End(xlUp).Row
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Sheets("Sheet1").Range("A2", Cells(NumberOfRow)), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code] .......
I get a run time error 1004 when I run this sort.
ActiveSheet. Range("A1:AC277").Sort Key1:=ActiveSheet.Range("G2"), Order1:=xlAscending, Key2:= _
ActiveSheet.Range("E2"), Order2:=xlAscending, header:=xlYes, OrderCustom:=1, _
MatchCase:=False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, _
DataOption2:=xlSortNormal
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
I thought I may of been able to get away with just using a simple macro which I could duplicate to copy all the cells in a column between 2 and 251 and
pasting them to another column on another sheet and it only referencing the available text within the first column, but it would appear to be referencing the
blank cells as well, which is creating errors for another function using this column.
So ideally I would like a macro to copy just the text data from a column within the range (F2:F251) on worksheet "Expansion".
All the cells have formulas in them which create a unique text string from other cells on the same sheet.
Not all the cells within the column will be populated with text strings at the same time, but the rows of text will always start at "F2"
and fill down without blank cells between the list of text strings.
The list of text strings will then be copied over to a different worksheet "AG-1" and pasted into column "A" starting at cell "A2".
This function is then repeated 14 more times for (G2:G251) through to (T2:T251) each pasted to different
worksheets "AG-2" through to "AG-15" respectively, in column "A" starting at "A2".
The first column to be found in the process with a blank cell in the starting row of that column, would deem the process complete. Otherwise continue the
process through to column "T".
I need values from column F in ascending order.
Also I need in column G only the values without formula.
I have never recorded a macro before and what I want, I think, is pretty simple but I can't figure it out. I want a sort button that sorts all information ascending by column B. See attached spreadsheet.
View 8 Replies View RelatedFor input I have in column A:
1
3
2
- (empty cell)
4
I want for output in column B:
1
2
3
4
Can I do something like this using a function?
I have data in a spreadsheet with approximately 100 rows. In column F, the following values are allowed:
Subscription
Redemption
Transfer In
Transfer Out
Switch In
Switch Out
way to sort them in this order, rather than ascending or descending? (I want all of the Subscriptions together, then the Redemptions, and so on...)
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32.
2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit
Dim ufEventsDisabled As Boolean
Function SelectedString() As String
Const Delimiter As String = ","
Dim i As Long
[Code] .....
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies View RelatedIn the below code, when I want to sort on Column "A" it is not working. Anything stand out that would prevent my code from working?
Sub Delete_Duplicates()Dim LastRow As LongWith Sheets("SAP Raw Extract")
LastRow = .Cells(Rows.Count, "A").End(xlUp).Row 'Create ID Column
.Columns("A:A").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove .Range("A1") = "ID"
.Range("A2").FormulaR1C1 = "=RC[5]&RC[6]&RC[32]"
[Code] .....
Is it possible to allow Autofilter but disallow Sort Ascending/ Descending for an excel list in sheet? I have data set up as an Excel List (Excel 2003, with Autofilter turned on) so all formulas, formatting etc copy down when a new row of data is added, however if I just Protect worksheet and disallow Sorting, the List features don't work. I also tried putting the following in the Worksheet Activate event
ActiveSheet.Protect AllowSorting:=False
But this doesn't seem to disable the Sort option in the Autofilter, only the Data Sort function.
I am trying to sort a combo box by ascending order...this combo box displays 2 columns of data which are populated from a spreadsheet. I would like to sort by the first column in the combo box which is numeric, but I do not want to sort the actual data on the spreadsheet.
View 2 Replies View RelatedI'm trying to sort a report using case number in Ascending order, this report varies in length and data begins in cell B2 down the whole report. It needs to include the fields on either side ie. expand the selection.
View 3 Replies View RelatedI have three columns of values that are in no particular order that need to be sorted in ascending order in another column.
View 9 Replies View RelatedI would like to call a macro which would sort rows 4-23 from the highest to the lowest, or if it is already highest to lowest, then sort from lowest to highest. This is how I am doing the current sort(High-Low):-
Rows("4:23").Select
Selection.Sort Key1:= Range("E4"), Order1:=Range("e1").Value, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Range("A1").Select
I have an Overview worksheet that is pulling info from all other sheets in the workbook.
What I want to do is order that info in ascending order depending on the worksheet name.
So I want all the worksheet names that start with 'AB' say sorted in ascending order and all worksheets that start with 'BC' in ascending order.
Now this I have at present working by a macro I created which once the info is loaded onto the sheet I just selected the info and ordered it in ascending order. The thing is though the next time I enter this Overview sheet I might have an extra worksheet that starts with 'AB' and this will not be included in the order, I will have to adjust it everytime so I need a more automatic ordering process.
I m use Excel 2003 to automate the following sequence of events that I currently do manually?
AutoFilter to filter the City in column B
AutoFilter to filter the Rotation in column X
AutoFilter to filter the Positional Status in column Y
Hide columns B:W
Use the computer mouse to select a range of that includes columns A, and X to AR (inclusive).
Copy 'n' paste this selected range to worksheet: Data to Text at cell A1
Insert a new column by selecting column A and right-clicking on the column and selecting Insert
Populating the new column A starting at cell A1 with number 1 and autofilling down to the last record (1, 2, 3, 4, 5, etc...)
Delete the folowing columns: C, D, E, G, J, L, M, N, P, Q R, S, T and V
Copy 'n' paste the all the remaining data to a new documnet in MS Word 2003
Select the entire table in MS Word
From the MS Word file menu - Select Table - Convert Table to Text
In the Convert to Table to Text pop-up window - select Other radio button and type in a forward-slash "/" in the input box adjacent to the radio button (without the quotes).......................................
I have an Overview sheet within my workbook that contains info from all other sheets.
What I want to do is when you click on the Sort button in the General sheet it will activate the Overview Sheet and
- first off sort all sheets starting with AJ together, then all sheets starting with CJ together and then all sheets starting with PJ
- then the next thing i want it to do is sort all Ajs by their start dates, sort all CJs by their start dates and the same for all PJs.
Now up until now I was keeping all sheets that began with AJs together in the workbook and so on so I was able to use the following sort function
Sub Overview_sorting() ...
Trying to add a named range at run-time
Here's what I have so far ...
I am having some trouble with a variable range selection within a regression. I keep getting an "application-defined or object-defined error." I've isolated each statement to find that the code that is causing the regression not to work is below (the error for that line of code states that the Select method of Range class failed):
View 6 Replies View Relatedthis is the line it gives the error on.
Range("A1").End(xlDown).Offset(1,0).Select
So I'm correcting macro at work and keep running into this error:
"Application-defined or object-defined error"
