I have data in a spreadsheet with approximately 100 rows. In column F, the following values are allowed:
Subscription
Redemption
Transfer In
Transfer Out
Switch In
Switch Out
way to sort them in this order, rather than ascending or descending? (I want all of the Subscriptions together, then the Redemptions, and so on...)
I am using VBA code to sort column N in decending order. However this code creates a worksheet 65535 rows long with credit values showing in the last few row....
View 9 Replies View RelatedIs it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
I need values from column F in ascending order.
Also I need in column G only the values without formula.
I have never recorded a macro before and what I want, I think, is pretty simple but I can't figure it out. I want a sort button that sorts all information ascending by column B. See attached spreadsheet.
View 8 Replies View RelatedFor input I have in column A:
1
3
2
- (empty cell)
4
I want for output in column B:
1
2
3
4
Can I do something like this using a function?
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32.
2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit
Dim ufEventsDisabled As Boolean
Function SelectedString() As String
Const Delimiter As String = ","
Dim i As Long
[Code] .....
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies View RelatedIn the below code, when I want to sort on Column "A" it is not working. Anything stand out that would prevent my code from working?
Sub Delete_Duplicates()Dim LastRow As LongWith Sheets("SAP Raw Extract")
LastRow = .Cells(Rows.Count, "A").End(xlUp).Row 'Create ID Column
.Columns("A:A").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove .Range("A1") = "ID"
.Range("A2").FormulaR1C1 = "=RC[5]&RC[6]&RC[32]"
[Code] .....
Is it possible to allow Autofilter but disallow Sort Ascending/ Descending for an excel list in sheet? I have data set up as an Excel List (Excel 2003, with Autofilter turned on) so all formulas, formatting etc copy down when a new row of data is added, however if I just Protect worksheet and disallow Sorting, the List features don't work. I also tried putting the following in the Worksheet Activate event
ActiveSheet.Protect AllowSorting:=False
But this doesn't seem to disable the Sort option in the Autofilter, only the Data Sort function.
I am trying to sort a combo box by ascending order...this combo box displays 2 columns of data which are populated from a spreadsheet. I would like to sort by the first column in the combo box which is numeric, but I do not want to sort the actual data on the spreadsheet.
View 2 Replies View RelatedI am trying to sort a column of data in ascending order but I am not getting the results I expect. An example of the data held in the cells is:
4972-1A
4972-10A
4972-2A
4972-1B
4972-3C
When I sort it in ascending order it sorts like:
4972-10A
4972-1A
4972-1B
4972-2A
4972-3C......................
I'm trying to sort a report using case number in Ascending order, this report varies in length and data begins in cell B2 down the whole report. It needs to include the fields on either side ie. expand the selection.
View 3 Replies View RelatedI have three columns of values that are in no particular order that need to be sorted in ascending order in another column.
View 9 Replies View RelatedI would like to call a macro which would sort rows 4-23 from the highest to the lowest, or if it is already highest to lowest, then sort from lowest to highest. This is how I am doing the current sort(High-Low):-
Rows("4:23").Select
Selection.Sort Key1:= Range("E4"), Order1:=Range("e1").Value, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Range("A1").Select
I have an Overview worksheet that is pulling info from all other sheets in the workbook.
What I want to do is order that info in ascending order depending on the worksheet name.
So I want all the worksheet names that start with 'AB' say sorted in ascending order and all worksheets that start with 'BC' in ascending order.
Now this I have at present working by a macro I created which once the info is loaded onto the sheet I just selected the info and ordered it in ascending order. The thing is though the next time I enter this Overview sheet I might have an extra worksheet that starts with 'AB' and this will not be included in the order, I will have to adjust it everytime so I need a more automatic ordering process.
Need code for automaticcally sort data in ascending order any time there was a change in score. The names column is b1:43 and the corresponding score would be in column c1:43. I can't seem to do it.
View 9 Replies View RelatedExcel 2007.
The first part of this code is fine and completes all the borders.
The second part is to the all the workbook by Data Sort in ascending order starting with
Column C
Then Q
Then column V
But also knowing to search to the last line. I think i might be close but not close enough for this to work.
Sub Macro2()
Dim LR As Long, i As Integer
Dim mysheet As Worksheet
Sheets("Test").Select
LR = Range("A" & Rows.Count).End(xlUp).Row
With Range("A9:AD" & LR)
[Code] .......
I want to do is sort in ascending sequence, a range defined as rTrainRow which is a row of text data. Each cell in the row can contain space, blank, one Alphabetic character or a special character such as $, %, (, +, etc.
View 2 Replies View RelatedI have a sheet diplaying 5 columns of percentages which I need to rank in descending order, i.e. assign rank 1 to the largest percentage and 5 to the lowest. See the attached sheet.
View 2 Replies View RelatedThere is a list that contains provinces, a name, and a number.
How can I find the top 10 names in descending order (highest num to lowest) for a specific province?
Eg. Column A
BC, ON, QC, BC, BC
Column B
Mary, Jane, Jack, Rudy, Hank
Column C
8,3,15, 20, 5
Column D
Top 3 for BC: Rudy, Mary, Hank
I'd like to carry out a VLOOKUP on a list of product. The product numbers contain numbers and letters, some start with several 0's. If i were to convert these product numbers to an actual number, the 0's are removed.
So, when I attempt to place the list in ascending order, it's not really in ascending order - it will start with the part numbers that Excel has defined as a number with everything else afterwards.
Is there anyway I can run a VLOOKUP without having to place the lookup table in ascending order?
I've sorted it by column A. However, sometimes the date is the same and then it doesn't always go right... see f.ex. 17 dec, where the ship arrives in the harbour and then is at sea again and then departs Not exactly what happens. I had the same problem on 28 dec, but there it disappeared when I told Excel to sort secondly on column B.
However, this doesn't work for 17 dec.
I'm using this code to import bulk *.csv files
Sub ImportCSVFiles()
Dim sh As Worksheet, sPath As String, sName As String
Dim R As Range, fName As String
Dim sh1 As Worksheet
But I've noticed that on import run, the macro mixing the ascending order of the files.
An example:
Inside my_folder I have 3 csv files:
advertise.csv
adwords.csv
adwords keyword tool.csv
When the macro runs, it takes advertise.csv as the 1st. (Thats Ok) then adwords keyword tool.csv data
before thaking adwords.csv
(I have over 100 files to import, so you can imagine the mess I'm facing..)
how to ascendantly sort groups of numbers within a cell?
For instance, in a cell I have the numbers "5417" and after sorting it would come out as "1457"
formula getting an ascending order from a long list of numbers.
I use excel for mac, 14.3.9
I have a column of values for example:
114
162
92
114
120
120
114
162
I need to be able to search this column and return the first instance only of each number in a different column in numerical order - which in this example will result:
92
114
120
162
How to create a column that has ascending values ie: increment of 1 eg. 1,2,3,4,5,6 ......
View 2 Replies View RelatedI was wondering if it is possible to copy a row without having the numbers ascend? I've attached an example spreadsheet and am trying to copy row 2, columns C - J to rows 3 - 16, but the numbers ascend when I do.
View 6 Replies View Related