I have never recorded a macro before and what I want, I think, is pretty simple but I can't figure it out. I want a sort button that sorts all information ascending by column B. See attached spreadsheet.
View 8 Replies
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
I need values from column F in ascending order.
Also I need in column G only the values without formula.
For input I have in column A:
1
3
2
- (empty cell)
4
I want for output in column B:
1
2
3
4
Can I do something like this using a function?
I have data in a spreadsheet with approximately 100 rows. In column F, the following values are allowed:
Subscription
Redemption
Transfer In
Transfer Out
Switch In
Switch Out
way to sort them in this order, rather than ascending or descending? (I want all of the Subscriptions together, then the Redemptions, and so on...)
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32.
2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit
Dim ufEventsDisabled As Boolean
Function SelectedString() As String
Const Delimiter As String = ","
Dim i As Long
[Code] .....
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies View RelatedIn the below code, when I want to sort on Column "A" it is not working. Anything stand out that would prevent my code from working?
Sub Delete_Duplicates()Dim LastRow As LongWith Sheets("SAP Raw Extract")
LastRow = .Cells(Rows.Count, "A").End(xlUp).Row 'Create ID Column
.Columns("A:A").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove .Range("A1") = "ID"
.Range("A2").FormulaR1C1 = "=RC[5]&RC[6]&RC[32]"
[Code] .....
Is it possible to allow Autofilter but disallow Sort Ascending/ Descending for an excel list in sheet? I have data set up as an Excel List (Excel 2003, with Autofilter turned on) so all formulas, formatting etc copy down when a new row of data is added, however if I just Protect worksheet and disallow Sorting, the List features don't work. I also tried putting the following in the Worksheet Activate event
ActiveSheet.Protect AllowSorting:=False
But this doesn't seem to disable the Sort option in the Autofilter, only the Data Sort function.
I am trying to sort a combo box by ascending order...this combo box displays 2 columns of data which are populated from a spreadsheet. I would like to sort by the first column in the combo box which is numeric, but I do not want to sort the actual data on the spreadsheet.
View 2 Replies View RelatedI am trying to sort a column of data in ascending order but I am not getting the results I expect. An example of the data held in the cells is:
4972-1A
4972-10A
4972-2A
4972-1B
4972-3C
When I sort it in ascending order it sorts like:
4972-10A
4972-1A
4972-1B
4972-2A
4972-3C......................
I'm trying to sort a report using case number in Ascending order, this report varies in length and data begins in cell B2 down the whole report. It needs to include the fields on either side ie. expand the selection.
View 3 Replies View RelatedI have three columns of values that are in no particular order that need to be sorted in ascending order in another column.
View 9 Replies View RelatedI would like to call a macro which would sort rows 4-23 from the highest to the lowest, or if it is already highest to lowest, then sort from lowest to highest. This is how I am doing the current sort(High-Low):-
Rows("4:23").Select
Selection.Sort Key1:= Range("E4"), Order1:=Range("e1").Value, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Range("A1").Select
I have an Overview worksheet that is pulling info from all other sheets in the workbook.
What I want to do is order that info in ascending order depending on the worksheet name.
So I want all the worksheet names that start with 'AB' say sorted in ascending order and all worksheets that start with 'BC' in ascending order.
Now this I have at present working by a macro I created which once the info is loaded onto the sheet I just selected the info and ordered it in ascending order. The thing is though the next time I enter this Overview sheet I might have an extra worksheet that starts with 'AB' and this will not be included in the order, I will have to adjust it everytime so I need a more automatic ordering process.
Need code for automaticcally sort data in ascending order any time there was a change in score. The names column is b1:43 and the corresponding score would be in column c1:43. I can't seem to do it.
View 9 Replies View RelatedExcel 2007.
The first part of this code is fine and completes all the borders.
The second part is to the all the workbook by Data Sort in ascending order starting with
Column C
Then Q
Then column V
But also knowing to search to the last line. I think i might be close but not close enough for this to work.
Sub Macro2()
Dim LR As Long, i As Integer
Dim mysheet As Worksheet
Sheets("Test").Select
LR = Range("A" & Rows.Count).End(xlUp).Row
With Range("A9:AD" & LR)
[Code] .......
I want to do is sort in ascending sequence, a range defined as rTrainRow which is a row of text data. Each cell in the row can contain space, blank, one Alphabetic character or a special character such as $, %, (, +, etc.
View 2 Replies View RelatedI'm trying to add a sort button to a list where I choose which column to sort. Attached is an example. Can this be done without VBA? If not, is the VBA easily editable??
View 2 Replies View RelatedI have a code with perfectly sorts Excel rows when you click a button:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Range("C1:S70").Select
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending
End Sub
but if i like to sort the columns by Row 1 how i can do it?
I would like to have a button or a link on my spreadsheet that when it is clicked will sort my table with a pre-defined sort.
View 3 Replies View RelatedI have a table with headings for each column.
How can I make the columns headers buttons/clickable, so that it sorts the rows on the column that was clicked upon?
I have data in several (50+) columns. I want to be able to sort all my data by the column I select with one click. So, I basically want a button over each column that sorts the data by that column. It would be ideal to have the same "Sort" macro that is attached to all the buttons. The macro should somehow know that the column the button is in, is the column to sort by.
View 9 Replies View RelatedI have a sheet name "all" Sheet 15. What I want to do via VBA is sort range B4:I803 sort by Column G (ascending) then by Column H (ascending).
Have this sort activated by a command button or once the WB is saved then activate the sort prior to saving. The former is the preferred but if it's not to much trouble with coding then the former and latter solution would be great.
Running excel 2003 and have a number of sheets where i want buttons along the headings to sort a selection of rows.
For Eaxample one sheet i have data in range A6:AD135. i would like to assign a macro to various buttons on row 5 to sort by that column ie button in column b sorts all data in the range by column B.
I need code to attach to a button!
In cell A1 I enter number of teams.
In Cell A2 I enter number of games to play.
Is there a way for me to click a button and...
In columns A and B it will give me a list of teams to play each other
based on the criteria above.
In Column A will be home team and B is Visitor.
Example I enter 9 teams with 12 games to play, hit the button and it will list the games in columns A and B.
I am working on a simple employee list with names, phone numbers, employee ID numbers, etc. I have created a VBA form to make new entries or change existing entries. The form has 'next', 'previous', and 'close' command buttons that work well, but I would like to have my data sort by employee name after any of the buttons are clicked.
My data is in worksheet "Employees" with employee names in column A beginning on row 2. Here is what I have entered for the 'Next' command button:
I already have a Macro button built that hides values in column A. The next step I am trying to perform is a custom sort on column B in this order "Backordered", "Sourced", Shipped", and "Received". Here is my code that I have so far but where to begin adding in code to make this button sort.
Sub Inbound()
ActiveSheet.Cells.EntireColumn.Hidden = False
ActiveSheet.Cells.EntireRow.Hidden = False
Application.ScreenUpdating = False
[Code] ........
Excel 2007/Windows 7
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
