I'm trying to sort a report using case number in Ascending order, this report varies in length and data begins in cell B2 down the whole report. It needs to include the fields on either side ie. expand the selection.
View 3 RepliesI'm trying to sort by a column with one to four digit numbers, any of which may be followed by a single letter, i.e. 1,2,3 4A,5, 10,11A,75,101A,600,705,1010B,1011A.
I'd like them to sort in the above order. I am only able to have excel 2003 sort all of the numeric cells first, followed by the cells with the alpha character.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
My worksheet contains data with the reaction times on a psychological test. Each respondent in the test has 280 rows in my excel sheet.
The 'perfect' length of the row, is from A to M. When an error is made in the test, the length of the row will increase. So the error length can be A to AA.
For me it is important to analyse the error. So I would like to give a perfect row length, the value 1, and an error row length a value 2.
So, in conclusion:
If:
Cell length = A1 - M1? --> Copy A1 B1 C1 (A B Cof that row) to Sheet3, and give D1 in sheet 3 the value 1
Cell length >= A1 - M1? --> Copy A1 B1 C1 (A B C of that row) to Sheet3, and give D1 in sheet 3 the value 2
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
I need values from column F in ascending order.
Also I need in column G only the values without formula.
I have never recorded a macro before and what I want, I think, is pretty simple but I can't figure it out. I want a sort button that sorts all information ascending by column B. See attached spreadsheet.
View 8 Replies View RelatedFor input I have in column A:
1
3
2
- (empty cell)
4
I want for output in column B:
1
2
3
4
Can I do something like this using a function?
I have data in a spreadsheet with approximately 100 rows. In column F, the following values are allowed:
Subscription
Redemption
Transfer In
Transfer Out
Switch In
Switch Out
way to sort them in this order, rather than ascending or descending? (I want all of the Subscriptions together, then the Redemptions, and so on...)
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32.
2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit
Dim ufEventsDisabled As Boolean
Function SelectedString() As String
Const Delimiter As String = ","
Dim i As Long
[Code] .....
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies View RelatedIn the below code, when I want to sort on Column "A" it is not working. Anything stand out that would prevent my code from working?
Sub Delete_Duplicates()Dim LastRow As LongWith Sheets("SAP Raw Extract")
LastRow = .Cells(Rows.Count, "A").End(xlUp).Row 'Create ID Column
.Columns("A:A").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove .Range("A1") = "ID"
.Range("A2").FormulaR1C1 = "=RC[5]&RC[6]&RC[32]"
[Code] .....
Is it possible to allow Autofilter but disallow Sort Ascending/ Descending for an excel list in sheet? I have data set up as an Excel List (Excel 2003, with Autofilter turned on) so all formulas, formatting etc copy down when a new row of data is added, however if I just Protect worksheet and disallow Sorting, the List features don't work. I also tried putting the following in the Worksheet Activate event
ActiveSheet.Protect AllowSorting:=False
But this doesn't seem to disable the Sort option in the Autofilter, only the Data Sort function.
I am trying to sort a combo box by ascending order...this combo box displays 2 columns of data which are populated from a spreadsheet. I would like to sort by the first column in the combo box which is numeric, but I do not want to sort the actual data on the spreadsheet.
View 2 Replies View RelatedI'm trying to use the coding below to insert a formula down the lenght of the report but it is coming up with a run time error.
View 2 Replies View RelatedI am trying to sort a column of data in ascending order but I am not getting the results I expect. An example of the data held in the cells is:
4972-1A
4972-10A
4972-2A
4972-1B
4972-3C
When I sort it in ascending order it sorts like:
4972-10A
4972-1A
4972-1B
4972-2A
4972-3C......................
I have three columns of values that are in no particular order that need to be sorted in ascending order in another column.
View 9 Replies View RelatedI would like to call a macro which would sort rows 4-23 from the highest to the lowest, or if it is already highest to lowest, then sort from lowest to highest. This is how I am doing the current sort(High-Low):-
Rows("4:23").Select
Selection.Sort Key1:= Range("E4"), Order1:=Range("e1").Value, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Range("A1").Select
I have an Overview worksheet that is pulling info from all other sheets in the workbook.
What I want to do is order that info in ascending order depending on the worksheet name.
So I want all the worksheet names that start with 'AB' say sorted in ascending order and all worksheets that start with 'BC' in ascending order.
Now this I have at present working by a macro I created which once the info is loaded onto the sheet I just selected the info and ordered it in ascending order. The thing is though the next time I enter this Overview sheet I might have an extra worksheet that starts with 'AB' and this will not be included in the order, I will have to adjust it everytime so I need a more automatic ordering process.
Need code for automaticcally sort data in ascending order any time there was a change in score. The names column is b1:43 and the corresponding score would be in column c1:43. I can't seem to do it.
View 9 Replies View RelatedExcel 2007.
The first part of this code is fine and completes all the borders.
The second part is to the all the workbook by Data Sort in ascending order starting with
Column C
Then Q
Then column V
But also knowing to search to the last line. I think i might be close but not close enough for this to work.
Sub Macro2()
Dim LR As Long, i As Integer
Dim mysheet As Worksheet
Sheets("Test").Select
LR = Range("A" & Rows.Count).End(xlUp).Row
With Range("A9:AD" & LR)
[Code] .......
I want to do is sort in ascending sequence, a range defined as rTrainRow which is a row of text data. Each cell in the row can contain space, blank, one Alphabetic character or a special character such as $, %, (, +, etc.
View 2 Replies View RelatedI need to write a Excel VBA (2003) code that can arrange the cells of one column based on the character length. An example is this:
Column Data before Running VBA
(Column A)
cat
oranges
apple
Column Data after Running VBA
(Column A)
cat
apple
oranges
I been doing this manually by using the LEN() command in an adjacent column (Column B) and sorting Column A. based on Column B. However, I wish to do this all in a VBA code that does not rely on how many rows are in Column A. I have dozens of excel sheets with various number of rows for Column A. Therefore, the VBA code has to also figure out when the last non-empty row is in Column A. Can anyone offer their suggestions to my problem?
So I have got an identifier and a corresponding column of values. I need to calculate sum of those corresponding values for each identifier, so if identifier is 1993, I need to have a sum of all the corresponding values. These identifiers repeat, and I do not want to calculate sum for all of them, just the immediate identifiers (i.e. you have 1993, after that you may have 1994 etc etc and then at one point you will have 1993 again, but that "new" 1993 will have a different sum of course). Also, identifiers do not go in sequence sometimes (however, most of the case they do), for example 1993 may jump suddenly to 2004. The trick with all of this is variable "row width" of these identifiers...
222.xlsm
Ive written the macro below to sort Column A according to the length of the cell values in Ascending order. Ive done this by writing the length to Column B for each value and then sorting on column B. Surely there is a more elegant method, perhaps using arrays.
Sub SortIt()
Range("A1").Select
Do Until IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Value = Len(ActiveCell)
ActiveCell.Offset(1, 0).Select
Loop
Columns("A:B").Sort Key1:=Range("B1"), Order1:=xlAscending
End Sub
how can I make this simple macro sum columns that will be of variable length? I would like the sum to appear as the last entry in that column and highlighted.
VB:
Range("H36").Select
Selection.FormulaR1C1 = "=SUM(R[-34]C:R[-1]C)"
Range("J36").Select [code]....
Column M:
##/##/#### | Variable Length Text-####
Example:
01/06/2014 | Daniel Trimble-4048
I need to parse out the different parts of Column M.
In Column R -- "Close Date", I'm successfully using:
=LEFT(M2,FIND(" | ",M2)-1)
...to extract the close date of the donation.
In Column S, I want to list the donor name--which is all of the text after " | ", and before the "-".
I don't need anything after the hyphen, and fortunately in this data, no one's name has a hyphen in it.
The Close Date is working fine for the LEFT and FIND functions, but for the life of me, I can't seem to get MID to work for the variable-length text. The text will always start in the same position -- 14, as the date and delimiter are standardized. And the last 5 characters of the text are not variable in length, so they can be cut out completely.
How do I use MID to extract everything starting at position 14, and stopping 5 characters short of the end of the text?
i just wanna extract the date shown(last data until meet the first comma) in first column to another column.
column 1
abcde, 1234
abcd, 12345
abcdef, 123
column 2
1234
12345
123
I have a SS I would like to reference a cell in a column which changes in
length. In this case, I would like to reference the most current date in a
column.
Is there a simple method for doing this, as the data will routinely be
different lengths in that column.
Further, there is Data on the Horizontal that I would like to reference to
another cell in another sheet that would correspond to this date. Can anyone
give any suggestions as to the best way to accomdate this?
I am trying to do is to build an array from a series of cells that may or may not contain text.
For example cells A1:A6 may be equal to red, orange, yellow, green, blue and purple,
but each cell may also be blank.
So I might also have blank, blank, yellow, blank, blue, purple.
Is there a way I can make an array of just {yellow, blue, purple}? and then the next time it may be {red, blue}
Or can I index only cells that have text?
In the end, I just need a way to make a selection from only those cells that have text.