Ive spent a few hours adding email hyperlinks to data in column B.
I now want to sort the data in the worksheet into ascending order using the data in column A.
The problem is, none of the hyperlinks from column B sort with the data in column A, they are still in the cell locations I had originally entered them.
Column C (starting at row 5) contains hyperlinks. I want to print the linked file, move down to the next cell, print that file, move on to the next, etc. FYI - The worksheets are from a seperate file.
View 2 Replies View RelatedHere is the original table:
This is with a filter on:
You can see there that some inserted object (in this case, PDF files shown as icons), are moved. I need to find a way to immobilize every inserted object within each cell boundaries. I want to freely sort or filter and avoid this kind of problem that gets worse with more rows, columns and inserted objects.
I currently have one spread sheet. At the top of that spread sheet there is an object that hyperlinks to cell A180. When i click that hyperlink, it take me to cell 180, but it appears at the bottom of the spreadsheet, rather than bringing it all the way up to the top of my current viewable screen.
View 3 Replies View RelatedI am trying to create a dynamic range for a list that I have. I also want to create an extra empty cell at the bottom or top to type in text that I need only once in some special cases. I named the list and changed the reference to =offset(Sheet1!,$A$2,0,0, counta(sheet1!$A$A),1). The data starts from A2. However when I used Data> Validation>List to see the data, I am always missing the last row in the list.
View 3 Replies View RelatedIm trying to create a validation for cells but the settings tab under data>validation menu isnt there.
View 2 Replies View RelatedI have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
The attached workbook has formulas that will return data from category sections that will grow and contract over time.
While it tells me that the total price of the "Active Overdue Customers to be Scheduled" section is 4119...I would like to determine how many in that section also have "Dunn" under the "Company" column.
Every section does not have the "Company" column, and "Company" is located in different columns in different sections.
I have some cells that are summed with total cost.... now i need to sort the totaled cells? How do i sort a cell that has a formula based on multiple other cells?
View 2 Replies View RelatedBackground: I am HR manager for a construction company & keeper of the call-in list of personnel who are looking for work. I have a simple sheet that has columns:
Date Name Craft Experience ...more info...
If each call-in had only one craft, wouldn't have a problem. Those who are multicrafted ar listed e.g. "EL, MW, BM" In the column C. A caller two days later may be listed as "MW, BM, EL" We input the data as they say it since that is usually their order of expertise. (Yes, I know that it should have been set up with each craft having its own column, but I inherited the sheet & it has 4000+ entries)
I wrote a couple of small macros & assigned buttons on the sheet to allow the users to sort the sheet by date, or name, or craft. My customers (project managers) have requested to be able to sort by craft but have all the folks with any specific craft listed together.
Example (Excel 2003): ..
I have 1 column with a varying amount of rows (around 2000+ rows) with data that is about 10 chars long. Since I cannot print it all on a few pages, I would like a way to re-orgnize the data into cells so I can print on as few pages as possible such that the qty of columns isn't wide then an 8.5 x 11 page.
One idea is the following.
Here's what i have.
Col1
1
2
3
4
5
6
7
8
9
10
...
Here's what i want.
Col1 Col2 Col3 Col4 Col5 Col6 Col7 ...
1 2 3 4 5 6 7
8 9 10 ...
I have a sheet which I need to arrange and it looks like -
Column A
Column B
Column C
Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be -
Column A
Column B
Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
i have an excel file that has several worksheet tabs most of which i have hyperlinks running on them, what i need to do is colate a couple of the sheets to a seperate excel file but when i try to copy them from the original file to the new file they will not copy because the info is hyperlinked!
View 9 Replies View RelatedI am trying to send email using and excel macro.
I would like to send an image that has a hyperlink in an email, so when the user receives the email they can click the image and it will take them to a webpage.
The code I have so far is this
With OutMail
.Attachments.Add "C:PanelImagesEmailer_EN.jpg"
.Save
.SentOnBehalfOfName = "Email@Address.com"
.To = cell.Value
.Subject = cell.Offset(0, 2).Value
.HTMLBody = "" & _
"IMG src=cid: Emailer_EN.jpg"
.Display
.Send 'uncomment to send
If I put text in the area after the link then the text appears as a hyper link.....
I have a workbook full of several tabs. The main tab is the 'Report' tab, all other tabs are hidden. The information on the hidden tabs populate onto the 'Report' tab.
My question is, I have created a shape on the 'Report' tab to act as a button. This "buttton" is which I have hyper-linked with one of the hidden tabs. When the hyper-linked tab is showing, the button works fine. However, when I hide the hyper-linked tab, the button does not work. I would prefer to have just the 'Report' tab showing.
I have a table of many rows and columns of information, some of which is hyperlinked to seperate sheets in the same workbook, some are not hyperlinked at all. What I want to do is select a column and when a hyperlink is found going down the column, copy the sheet that it is linked to into a new book, then find the next hyperlink and copy that sheet into the same book as the first one. So if I have 25 hyperlinks in the column, I finish up with a new book containing 25 sheets in the order they were found. Hope someone can help me with this, it will save me hours of work.
View 9 Replies View RelatedIf, say cell A1, contains text such as:
"This Forum is wonderful, to see a great example for a post click here." <This is not an actual link here!>
Is it possible to have the "click here" part as a hyperlink, and not the entire cell?
Or- do i have to add an "image" or something similar to which i can add the hyperlink and then anchor the "image" to that cell?
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View RelatedIs there any way I can make it so an image is hyperlinked to a cell with specific text entered. After clicking on the image, the cell where the image is hyperlinked to changes text.
For example:
An image of a strawberry is hyperlinked to a cell which contains the word "strawberry".
After clicking on the strawberry image, the cell which contained the word "strawberry" now contains the word "strawberry1".
If you understand that, I would so love the help.
I also posted this is question here
http://www.excelforum.com/showthread.php?t=637811
If Else Statement doesnt work well. I just create a code like:
View 2 Replies View Relatedi have a workbook which is mainly use in construction building design... i want users to input ther respective data in that workbook to calculate and design only, but i dont want the user to save the changes they made...
View 9 Replies View RelatedI need to replace format for multiple cells. Most of them have formulas and shows values. But Replace wont let me choose to look in values as you can see in the picture:
I'm completely lost. I just did replace with "Look in: values" option couple of hours ago. And now this... Or am I going crazy?
i have this formula in cell L30. change formula so it doesnt retun #value!
View 2 Replies View RelatedWhat I am trying to do is create a chart for each row in my raw data - the rows does change on a week to week basis as we are comparing stores
My raw data is: (I would post data although its too wide
Column A - New Store
Column B - Like Store
Column C:N - New Store Sales
Column O:Z - New Store SOH
Column AA:AL - LIke Store Sales
Column AM:AX - LIke Store Sales
I am trying to loop my code so that it creates a new chart for each row....although the loop keeps going and it doesnt move down a row each time
my code is:
Range("A1").CurrentRegion.Select
rnum = Selection.Rows.Count
Range("C2:N2").Select
For i = rnum + 1 To Rows.Count
If rnum >= 1 Then
Charts.Add
ActiveChart.SetSourceData Source:=Range("'CHART RAW DATA'!$C$2:$N$2").................
im trying to use a loop to open each file within that folder. My problem is it keeps looping and only opens the same file -
my code is:
'Enter names of files within C:Temp in activesheet
Dim myDir As String, fn As String, txt As String, myList
myDir = "C: emp"
fn = Dir(myDir & "*.xls")
If fn = "" Then Exit Sub
Do While fn ""
txt = txt & vbLf & Left$(fn, InStrRev(fn, ".") - 1)
fn = Dir
Loop
I've been searching around here to see if anyone had an answer about codes and macro changes from 03 to 07. The closest thing I found was something about lists being tables and such. However, I am still unsure of what the issue might be in my case.
Sub ArrangeColumns()
'
' ArrangeColumns Macro
' Macro recorded 3/7/2008 by ****
'
'
endRow1 = ActiveSheet.UsedRange.Rows.count + 1
Range1 = "A1:O" & endRow1
Range(Range1).Select
Range("A3:O39").Select
Application.CutCopyMode = False
ActiveSheet.ListObjects("List1").Unlink
ActiveSheet.ListObjects("List1").Unlist
Columns("A:B").Select
Selection.Delete shift:=xlToLeft
Columns("I:I").Select
Selection.Cut
Columns("B:B").Select
Selection.Insert shift:=xlToRight
Columns("L:L").Select
Selection.Cut
Columns("C:C").Select
Selection.Insert shift:=xlToRight
Columns("M:M").Select
Selection.Cut
Columns("E:E").Select
Selection.Insert shift:=xlToRight
Columns("L:L").Select
Selection.Cut
Columns("G:G").Select
Selection.Insert shift:=xlToRight
Columns("B:B").ColumnWidth = 11.29
End Sub
So here, the red text is what gets flagged when you run the macro. I seem to be getting a Run-time error '9': Subscript out of range error.
I am not exactly sure what the macro does besides clean up and sort a portion of a worksheet. Also, there is not worksheet called "List1," but changing that value does nothing. Is there an equivalent command to those highlighted in red? Or, perhaps if anyone knows of a place where I may reference these commands myself, that would be great as well.
I noticed there any plenty of examples of delete row if variable EXIST. But im after deleting rows if an array of string items DONT exist. EG. vList = Array("AWilson54", "ADavey99", "MPaterson44").
its for a varying size document and the column to search through is (AN). Does anyone already have something for this? as i mentioned before there are plenty of search hits on if a value exists but not the opposite.
I am using this code to select the first empty cell in column A.
View 9 Replies View RelatedNeed to create a macro to remove all the rows which doesn't belong to the current month, i have attached a sheet but don't know how to create a macro.
View 5 Replies View RelatedI have a Piece of Code that copys a Row in my Spreadsheet and Pastes it underneath the original Row.
The Problem that I am having is that within the Row it Copys there is a Spinner in it. I want the Spinner to be copied also but the Cell that the Spinner is Linked to Says as the Original Cell, it doesnt move Down with the New Row Pasted in.
Here is the code that i have written to Copy the Row and Paste it down a Row.