I don't understand why when I try to sort the pasted selection I get an error!! I just copied a list from one workbook into another and I am trying to sort that list ascending. Once I get to the sort line I get a run time error.
Windows("book1.xls").Activate
Sheets("A").Activate
ActiveSheet.Range("D2").Select
ActiveSheet.Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
I have been working on a spreadsheet with 28000 lines and I have gone through and resorted, researched and completed the spreadsheet over the last couple weeks. When I went to change it back to a CSV file to give back to the vendor, I realized that at some point when I sorted the list I mixed up the unique identifier (I at some point did not sort the UID only the other columns) and because I have resaved this file over itself I only have the original CSV file to go back and reimport... but dont have time to look up each of these 28000 lines again. I am looking for a way to take a cell from my final spreadsheet (Spreadsheet A) then find it on the original CSV spreadsheet (Spreadsheet B) then copy the UID field from speardsheet B to a blank field in spreadsheet A.
View 2 Replies View RelatedI am trying to write in VBA sorting button but I am receiving error 1004. I have recorded Macro while selecting 2000rows and sorting it by B then C then A. Columns go to T and some of the columns are empty. However, first 3 lines are completely filled. This is what I have got from recorder(I have adjusted first 2 lines to suit)
View 2 Replies View RelatedCreated the following macro, but doesn't seem to work.
Sub SortTable()
With Range("TC_Table")
.Sort key1:=Range("TC_Table").Cells(1, 1), Order1:=xlAscending
.Sort key2:=Range("TC_Table").Cells(1, 2), Order2:=xlAscending
.Header = xlYes
[Code] .....
I have a long list of records/rows. Each record has about 22 cells (columns).
Recently the number of records/rows exceeded 1400 and I started noticing that Excel no longer can sort my records correctly. I sort them according to the first column, which is called PRIORITY. And these values go from 0-2500 and more. But very often my list looks as follows
2500
2437
2355
102
108
107
2102
169
1982
1970
And so on.
The funny thing is if I sort less than 1400 entries, it does it right. Actually, the cutoff line is somewhere between 1410 and 1425. Usually below 1410 it will work fine, above 1425 it will not, and between 1410 and 1425 it is erratic.
I've got large set of data(Column E) for dates from 2007 to 2013(Column B). Here dates are in chronological order.(Attachement) Now I want to match the data in to dates in Column H. Here dates are in random order. I used =INDEX(E3:E40582; MATCH(H3;B3:B40582; 0)). But it doesn't work.
View 5 Replies View RelatedError Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies View RelatedOK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies View RelatedI have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View Relatedwhether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
I'm getting the error for the following piece of code.
Sub itconfandscratch()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "sturecord"
Database_Name = "Scratch" ' Enter your database name here
SQLStr = "SELECT stuname FROM dbo.sturec" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ""..............
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View RelatedI have a very simple spreadsheet that generates a "backing page" for items to be physically pasted to (essentially nothing more than printing a header). I have the following code under "This Workbook" to avoid being prompted to save changes when closing, as this spreadsheet is just a template and changes should not be saved...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code does as is intended, but, if any other spreadsheets are open at the same time, I get an error message pop-up saying "EXCEL has encountered an error - an error log has been generated"... Excel then shuts down. So, first question; where should I look for the error log?
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
View 13 Replies View RelatedI imported some data from an MDB file while working at home. created a macro to that effect. and it works fine at my home PC. but when i try t execute this macro on another PC or work place, then it gives error #13. i dont understand why. something is wrong with the code. i think it is the "WITH" code for query tables connection giving error ....
View 9 Replies View RelatedI'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
View 9 Replies View Related"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
I have a VB function in a worksheet that requires data from a workbook that is not under my control. The problem is that the workbook does not always have complete data. Often cells are filled with #VALUE, when this occurs I need a way to tell my VBA to assume a value of 0. I have tried using if(cell="#VALUE", 0,cell) but to no avail. any suggestions?
View 7 Replies View RelatedI have written a long bit of code, which works fine. I decided to add an error handler just in case of any errors. I have run through my code numerous times to confirm that there is no error, but the msgbox still pops up.
View 3 Replies View Relatederror handling ?what actually does the following do...? On Error Goto 0
View 2 Replies View RelatedThe code thats generating the error is the following:
For Y = 8 To 131
TmpDate = Empty
Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate)
TmpChar = Mid(TmpDate, Langd, 1)
If Not TmpChar = " " Then
TmpComp = TmpComp + TmpChar
End If
Next Langd
TmpDate = TmpComp
TmpComp = Empty
If Len(Dag) = 1 Then
Dag = "0" + CStr(Dag)
End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work).
A little explanation to the code.
I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures.
The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch".
The value I get from the intranet spreadsheet looks similar to this:
"1 Jul 2006 " (note all the spaces).
What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part.
The error only happens at runtime on the first go.
If I chose to END the macro then and there, and then run it again from the top it works perfectly.
If I set a stopsign to debug the code, it works perfectly on the first go too.
Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code.
I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...
I was trying to add a popup box so that if no match was found, it would report a popup box stating so.
Well, It runs successfully, however it executes every, single time! LOL
Sub Find_and_Update()
On Error Goto A
Dim Search_Range As Range, Found_Range As Range
Dim SearchFor As Variant, cell As Range
SearchFor = Range("J3").Value
Set Search_Range = Range("A:A")
Set Found_Range = Find_Range(SearchFor, Search_Range, xlValues, xlPart, False)
For Each cell In Intersect(Found_Range.EntireRow, Columns("G"))
cell.Value = cell.Value + 1
Next cell
A:
MsgBox "Not Found"
Range("J3").Select
Selection.ClearContents
Exit Sub
Range("J3").Select
Selection.ClearContents
End Sub