I've got large set of data(Column E) for dates from 2007 to 2013(Column B). Here dates are in chronological order.(Attachement) Now I want to match the data in to dates in Column H. Here dates are in random order. I used =INDEX(E3:E40582; MATCH(H3;B3:B40582; 0)). But it doesn't work.
View 5 RepliesI have a list with different categories and several characteristics per category. My goal is to identify the 10 strongest growing characteristics (I guess by sorting them in descending order) and then show them in this order, but organized in the respective categories. e.g.: if "Psychographic">"Demographic" and "geographic" and "behavioralistic", then put "Psychographic, including its subordinated characteristics that are included in the top 10, first. Follow this order until all Top10 members are included.
View 2 Replies View RelatedI'm attempting to sort a list of containers and their corresponding quantities (A24:B28 in the attached spreadsheet) by using a combination of an index and match formula (cells A31:A35) and a large formula (cells B31:B35) in order to have the container with the largest quantity (summed in cells B24:B28) appear below in cells A31:A35 and the corresponding quantities in cells B24:B28.
My current index and match formula works fine until I have the same quantities of different containers as I have replicated on the attached spreadsheet. When this is the case, the formula returns only one of the various container types. How do I edit the formula to allow for multiple containers with the same quantities?
why a macro that works without a problem in Excel 2010 now crashes Excel 2013. The error produced says 'Automation Error Exception Occurred'. If I place a stop in the code and hold the F8 key down, the code runs perfectly (Excel 2013) but if I run it, it will crash. The code is copying a worksheet into a new workbook, adding 2 more worksheets, saving then emailing the workbook before closing. It goes through the routine about 7 times before crashing (sending only 7 email out). It's something to do with the email because I can bypass that code and it runs that part without a problem.
Our office just upgraded all the computers to Office 2013 and I've got to get this macro running again. I had to email 100 reports one-by-one today and I didn't like it.
I have the below code which was working at work using Excel 2010. We have upgraded to Office 2013 and it no longer works
Error: Compile Error. Cant find Project or Library
It does highlight this : If Right(varFile, 4) = ".xls" Then
Code:
Sub PropertyName_SAVEAS()
Sheets("Menu").Select
Range("I27").Select
Dim varFile As Variant
Dim strFileNameDefault As String
On Error Resume Next
[Code] .......
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Sheets("Sheet1").Copy After:=WB.Sheets(WB.Sheets.Count)
I recently copied in this sheet from another workbook, and deleted all of it's formula names, but I can't copy any other sheets now either.
The Run time Error 1004: Copy method of Worksheet Class failed pops up. What is weird is that I put in a msgbox and
MsgBox (WB.Sheets.Count)
returns a "1" though the sheet has about a dozen sheets within it. I've saved the workbook and even saved it as another name.
The sheet I imported has a sheet number of 77 while the previous last sheet was 23, could this be a cause?
I have a formula
=INDEX(Wholesales!A:C,MATCH(Data!A2,Wholesales!A:A,),MATCH(C2,Wholesales!B:B,))
Now this returns the correct value for the first row only, then after that I get the famous #REF! error. Any ideas why it only works for the first row?
I have a complicated spreadsheet with several columns. Some columns B, D, E, F, M come from calculations on other columns or are columns copied from other worksheets within the same workbook.
I have another column C which is generated entirely off a macro with no input from the user.
I insert a row at line 8 (see above). However its just a blankrow and the formula highlighted in E2 does not show in E8 but it does appear for E9. I'd need that formula to be in E8.
My dilemma is how to insert a row and have it copy the formula from too.
I'd like to avoid copying another row into it and editing data. Other thing to avoid is putting all new rows at the end of the spreadsheet if possible. Has to be in the middle of the existing table.
I have Excel 2010 or 2013.
I am trying to auto fill this formula down a column but it doesn't keep the C4,D4,E4...ETC to stay constant
I manually did these two correct ones
=SUM(C5*C4+D5*D4+E5*E4+F5*F4+G5*G4+H5*H4+I5*I4+J5*J4+K5*K4+L5*L4+M5*M4+N5*N4
+O5*O4+P5*P4+Q5*Q4+R5*R4+S5*S4+T5*T4+U5*U4+V5*V4+W5*W4+X5*X4+Y5*Y4+Z5*Z4+AA5*AA4)
=SUM(C6*C4+D6*D4+E6*E4+F6*F4+G6*G4+H6*H4+I6*I4+J6*J4+K6*K4+L6*L4+M6*M4+N6*N4
+O6*O4+P6*P4+Q6*Q4+R6*R4+S6*S4+T6*T4+U6*U4+V6*V4+W6*W4+X6*X4+Y6*Y4+Z6*Z4+AA6*AA4)
when I drag it down it incorrectly looks like this:
=SUM(C7*C6+D7*D6+E7*E6+F7*F6+G7*G6+H7*H6+I7*I6+J7*J6+K7*K6+L7*L6+M7*M6+N7*N6
+O7*O6+P7*P6+Q7*Q6+R7*R6+S7*S6+T7*T6+U7*U6+V7*V6+W7*W6+X7*X6+Y7*Y6+Z7*Z6+AA7*AA6)
I want C6,D6,E6 to be C4,D4,E4 ETC
using Office Professional Plus (2013). Within my spreadsheet, I have a series of progressive dates to be used in as a timeline. Ultimately, what I need to accomplish is that when I change one date, all the proceeding entries update according to my timeline criteria (in this case 3 weeks or 21 days). I created a SUM formula that worked but only calculated one time. Once the calculation completes, the cell drops the formula. I need this to be constant as the dates often change. How do I get the formula to maintain? Further more, is there a better method to accomplish the task at hand other than the SUM option?
View 7 Replies View RelatedI need CF entire row if column D cells contains formula. All formulas starts with =, so I guess It should be worked around it, but I don't know exactly how. I Use excel 2013.
View 1 Replies View RelatedI am working in Excel 2013.
My objective is to count the number of "Horizontal-Horizontal" entries in Column D for a specific value in Column C, BUT (and this is where I am lost), taking into consideration only unique values in Column A.
So, for the highlighted red entry in my spreadsheet sample below, there are 2 entries of Horizontal-Horizontal for Column C value A2961. BUT since, Column A entries for A2961 are duplicates, I want to return a value of 1. Hope this makes sense.
This is my formula that is working for the first part of the equation. I need to add something to it to condition the count based on unique values in Column A.
=COUNTIFS($C$2:$C$101192,C2,$D$2:$D$101192,"Horizontal-Horizontal")
A
B
C
D
E
F
4229532326
HORIZONTAL
A1657
Vertical-Horizontal
A1620
0
[Code] .........
I need entering multiple arguments in an IF formula in Excel 2013. Here is the formula with just 1 argument.
=IF(SUM($G$4:G15)>3000,G15*0.8,0)
I need to combine it with the following.........
=IF(SUM($G$4:G15)>10000,sum($G$4:G15)-G15,0)
So to say, if the sum totals more than 3000 but less than 10000, then I want the cell value (G15) multiplied by 80% (.80). if it is greater than 10000, i want the sum minus 10000. If both arguments are false (sum totals less than 3000) then the value placed should be 0.
I have been working on a spreadsheet with 28000 lines and I have gone through and resorted, researched and completed the spreadsheet over the last couple weeks. When I went to change it back to a CSV file to give back to the vendor, I realized that at some point when I sorted the list I mixed up the unique identifier (I at some point did not sort the UID only the other columns) and because I have resaved this file over itself I only have the original CSV file to go back and reimport... but dont have time to look up each of these 28000 lines again. I am looking for a way to take a cell from my final spreadsheet (Spreadsheet A) then find it on the original CSV spreadsheet (Spreadsheet B) then copy the UID field from speardsheet B to a blank field in spreadsheet A.
View 2 Replies View RelatedI am trying to write in VBA sorting button but I am receiving error 1004. I have recorded Macro while selecting 2000rows and sorting it by B then C then A. Columns go to T and some of the columns are empty. However, first 3 lines are completely filled. This is what I have got from recorder(I have adjusted first 2 lines to suit)
View 2 Replies View RelatedI've got general ledger information that I export out of my accounting software (see attached spreadsheet). From there, in another spreadsheet I do vlookup formulas to get information from this general ledger. However, in order for the vlookup formulas to work properly in the other spreadsheets, I have to go through this general ledger spreadsheet and manually enter just the first five numerical digits in column A for each Total row. I would like to be able to find a solution that would return just the first five characters of the category (column B found at the top of each section) into the cell in column A on each total row. I usually have to manually enter 50-100 of these many, many times a month so it gets time consuming after a while. I'm using Excel 2013.
View 1 Replies View RelatedUsing Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
I send these kind of mails to intimate people about upcoming meeting, the format I prepare in Excel 2013 and paste it in Outlook 2013 (as a table, not as an image)
Now one of the columns I put as 'Days Remaining' which basically tells the users how many days are there to the review, the image below will show how it looks:
Now the numbers of days remaining will be correct the day I send the mail, but when somebody opens the mail at a later date, it would not sort of show the true number.
Is there a way to auto-update this number inside the Outlook mail, as it works in an Excel Sheet?
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
IIn my example I have result data from the 2013 USPGA Tour, ordered by player (column A) with subsequent columns detailing their finishing position in each event.
I simply want to condense each player's performance data into one row - as doing it by hand after each event is very time-consuming.
Is there a way of using a simple formula, macro or pivot table (or whatever) to merge each player into one row, but keep each column in the same position (ie to correspond to each weekly event).
Ok just started using Excel 2013.
Trying to sort 3 columns:
Column 1:
A1/B1
A2/B2
A3/B3
Column 2:
Team 1
Team 2
Team 3
Column 3:
1
2
3
Column 3 is just a ranking from 1-30. So I select all the data in columns 1 and 2 and hit sort from largest to smallest and it looks like excel computes, but nothing changes and it doesn't sort from largest to smallest? A
I am using Excel 2013, and I am following the example here: VBScript Scripting Techniques: Read Excel files without using Excel that reads in Excel data as an ADO record set to a classic ASP file using VBScript. I am not able to import all the Excel data successfully, and I need to know what I'm doing wrong. Note that in all these samples cell A1 is the heading text "Column1" and the main data starts on cell A2 (consistent with the example code).
When my source Excel data looks like the following:
Code:
Column1
1
2
3
4
5
6
7
X
9
10
It imports everything OK. However, if I move the X to the next row:
Code:
Column1
1
2
3
4
5
6
7
8
X
10
...the "X" cell gets imported as an empty string. So the imported array looks like this:
Code:
arrSheet[0][0]: Column1
arrSheet[1][0]: 1
arrSheet[2][0]: 2
arrSheet[3][0]: 3
[Code] ....
But if I add another X to an earlier row in the source worksheet, like so:
Code:
Column1
1
2
3
4
5
X
7
8
X
10
...this gets imported OK.
I'm trying to figure out how to copy raw data from one file(emailed to me) and paste it to my existing file "File b" into a table "tbl a"(to make it dynamic). From another table "tbl b" on another sheet within in "File b" I want to auto populate "tbl b" with all the records from "tbl a" but not all columns from the records. To make it more difficult, I want to edit some of the data and the headings between the two tables are not the same. Example below.
Ship-to-name
Product Name
Date Shipped
Customer Group
ABC-Atlanta
Advil (Ibuprofen) 800MG
11-15-2013
Wholesaler
[code].....
Notice column b has different heading and the data need to be modified. Column d is not needed at all.
Also this need to happen when the raw data is copied into "tbl a" and again all records need to be copied over with changes.
This also needs to be done outside of VBA if possible using just formulas and possibly filtering.
I'm using MS Excel 2013
i am trying to remove the unknown character and extra space from the name. Though i use formula as trim or proper(trim), it is not removing the Unknown character / extra space. I have attached the few name as sample. Formula to remove these Unknown character / extra space, double space, special character from selected cell?
Note : I am using ms office 2013
I'm using some workbook-scoped named formulas to define some dynamic ranges which will be referred to by numerous worksheets. The named ranges are defined like:
NAME: gTable_costDetailsEquipment
REFERS TO: =globalParameters!$B$5:INDEX(globalParameters!$B$5:$C$1048576,1+countAdjacentNonBlank
(globalParameters!$B$5,"down"),1+countAdjacentNonBlank(globalParameters!$B$5,"right"))
From either of the tabs "Reports" or "DOR_Template" the user can press the large "+" icon to add a report (which copies the template or the last report to a new sheet).
When this Sheet copy takes place, excel is repeating my named formulas - this time it's making LOCAL versions scoped to the newly made worksheet.
I've used this copy sheet trick before and have never had excel create new, locally scoped, named formula for each workbook level name.
I also just recently started using excel 2013, is this a problem with the new version? I've just never seen this problem, usually workbook-level names are NOT duplicated on sheet copy.
How do I transpose a horizontal reading excel into a vertical reading excel and transpose all of the data and formulas?
View 1 Replies View RelatedExcel 2013 on a surface tablet and attempting to create a data form. I've followed the necessary steps to try and add the "Form" button to the quick access toolbar, but "Form" is simply not a listed command. Have looked in "All Commands", "Commands not listed in the ribbon" and "Data Tab" and it's nowhere to be found. Not greyed out, just not there.
Frustrating because it's so easy to create a form on past versions of excel. All the tutorials I've seen online explain how to add "Form" to the quick access toolbar
I have to import data from an external source(oracle database) to an Excel(2013) table.
Now the data in the staging table in the database keeps refreshing/changing, However in Excel i need the data to come into a new row everytime instead of refreshing the whole table and looking like the staging table in the database. So basically i need to build history in Excel.
I'm having trouble filtering a large list of 900 names to create mailing labels for anon-profit organization. For years I have been using Microsoft Works to create these labels, however, the people now doing the membership insist on using Excel. I have Office 2013 and am using Excel 2013 on a new Dell PC using Windows 7. I have partially solved the problem but have one hang up.
I got to a point where I could filter out the dates and a couple of other items, but can't seem to get the last two. I was able to get the minimum date (equal to or greater) than 2012 to filter and the (equal to)LIFE (life membership) one and the (equal or greater than) ID# of 9000to filter by changing the cell format in all of those columns of cells to "text" instead of "general", BUT I still can't get it to (be blank) for the M column which houses a "D" or "U" (indicating deceased or uninterested) and an E column which houses an "E" if the person receives the newsletter electronically rather than by mail.
My fieldset up is:
To Year is equal or greater than 2012
Or M Class is equal to LIFE
Or ID# is equal or greater than 9000
And M is blank
And E is blank
The first three work but the last two do not seem to filter properly.
I have made a Rota of sorts using Excel 2013 Desktop Edition for my charities volunteers (and stored it as a shared file via office 365 server that they can download and edit) and this rota is populated by our volunteers manually. Each day our controller needs to check the file to see who is on duty at that time.
How the Rota is populated.(the bit i managed to do myself)
The volunteer (Person A in this example) would open the excel file and go to the month they wish to choose a shift for (ref worksheet: FEB in this example). They would then pick a shift that suits them and click on the cell (ref: F32) that shows a vehicle available, then from the drop down list they select their name and then save and close the sheet.
Rather than our volunteer controller going through the sheet for the current month (ref worksheet: Sheets JAN to DEC) I would like them to use the first sheet in the workbook (ref worksheet: DC Info Page) to get an instant view of which volunteer is currently on shift.
My current problem
I don’t know how to make the excel file do the following
Search sheets JAN to DEC (ref cells: C4:I58 on each sheet) inclusive for the cell that contains today's (current actual) dateCopy the 8 (eight) cells below the cell that contains today's datePaste the copied cells in to the relative cells (ref: C8 to C15) in sheet one (ref worksheet: DC Info page)
I would also like this to be done automatically so the controller does not have to click on anything after they open the file. But if it needs a button to process the request, one could be added to the worksheet (ref: DC Info Page)