Column References: Get A Cell To Return A Value Depending On Whether Or Not A Cloumn Is Populated
Jun 24, 2006
get a cell to return a value depending on whether or not a cloumn is populated
for example. If i Have 3 columns EUR, GBP and CHF and there can (99% of the time) only be one entry in any of the 3 on any given row. How then can i get a 4th column to return the value EUR, GBP or CHF on the same row as an entry. I have a relatively complicate nested IF fromula but i think this is slowing down the worksheet as there are 500 or so rows containing it. Ive attached an example segment
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
I have attached a sample file. I would if possible like to have a hyperlink at the top of the sheet that when pressed would take you to the last populated cell in column G. I can do a normal hyperlinks but over time the hyperlink would take you to the wrong place as the sheet is filled in more and more. Is this possible?
I have tried to adapt various macros I have found on this forum but they on't seem to do want I ask of them I also seemed to have acquired an extra vba project (Ubitmenuo4) in the worksheet and can't get rid of it, so just ignore that
I have a column array with various cells in that array populated. In every subsequent cell in that array I want a formula that finds the previously populated cell and that value added a cell that is in the same row but two columns to the left.
Basically i have a manpower chart with months along the top and names down the far left. People are going to start work in different months so i want to know at the side of each persons name the month they start. Heres a simple example
I have column headers starting at B1 thru F1, with the following values Month1,Month2,Month3,Month4,Month5 In cell D2 i have the value 1 I want Cell A2 to return the value Month3
I have 3 columns (data, date & price). What I would like to do is find the last populated cell in 'date' column and autofill it based on column 'data'. The tricky thing is that the date form is text and while autofilling manually it changes.
I have a template worksheet that several people use and print from. The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit. i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
i have a manpower chart with months along the top and names down the far left. People are going to start work in different months so i want to know at the side of each persons name the month they start. Does that make sense? Heres a simple example
I have column headers starting at B1 thru F1, with the following values Month1,Month2,Month3,Month4,Month5 In cell D2 i have the value 1 I want Cell A2 to return the value Month3
I have a very long excel sheet. What I want to do is, depending on the input in one column (text), return a another text in another column, for the whole sheet.
I tried to with Select Case Statement and if-then, but couldn't figure it out since I don't have much VBA experience.
I have a cell A5 in a worksheet that can be either E or W. I am looking for a formula in Cell A10 in the same worksheet to return numeric values of either +1 if cell A5 is W or -1 if cell A5 is E
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range
On Error GoTo mEnd Set rng = Sheets("Log").[F14:F10000] If Not Intersect(rng, Target) Is Nothing Then If Target = "" Then With Sheets("Log")
I have a spreadsheet with 2000 rows, and I need to add one column with the IF function that looks at the cell in the column to the left for each row, all the way down. How do I do that without typing in the specific different cell references for each row in my IF column?
I'm working on a workbook where I'm linking data from a bunch of spreadsheets to a summary page. I have the first column (A) set up. I dragged the data across several more columns. Now I need to change reference to the tab in each column. Is there a quick way to do this without copying and pasting the tab name into each row (about 30 rows)?
(Each column represents a tab, the rows are the same type of data in every tab.)
I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
find a row containing text. Like when opening a PDF file with Excel, all the pdf code is in column A. I would like to create a formula that would search column A for the text "Example" and have the row number be the result.
I've tried using index, match, find, search, etc.. and nothing seems to work.
I have a spreadsheet with names and start / finish dates columns down the left hand side then a row of week commencing dates along the top.
for each name row I would like to change teh fill colour of a cell to green to represent the week in which they started and to red for the week in which they finished. I therefore need to cross reference the start and finish dates for each name with the relevant week commencing dates at the top. Somehow! I presume there is some kind of vlookup type formula that I need to use in conditional formatting, but I am not sure what.
I have data from another worksheet that has up to 400 rows, containing duplicate data. The new sheet only needs 200 of the same rows with out the duplicates. how can i select every other row in a column to delete it.
I have a sheet with a country in it in A1 (validation list).
Depending on the country in A1 a country specific IF command has to be executed on a column1 with first cel = A3. This IF command also relies on the values in column 2 and 3 on the same row. (B3 and C3 are in the IF cmd)
I taught to do it like this : =IF($A$1="Spain";$A$5;0) with A5 being the country specific IF command which should be executed when spain is selected. however when I do this, this only works for the first cell ( I cannot drag this formule down, since it will always give the value calculated in column 2 and 3 on row1.
I'm not sure if the best way to 'select' the country specific IF cmd is with another IF command..
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D. e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I got 2 columns A and B, I need to find if the cells in colume B are in cloumn A and do some copy pasting. But sometimes when it cant be find in column A, then VBA shows an error message. What I want is if it cant be find in column A, then skip it and go to the next cell of B and find it in A again. I think it can be done with On error resume next, On error goto 0, but i cant make it work.
I have a worksheet where the first two cells in the header are blank but the third and last cell is not. I'm trying to find the code which would give me the last populated cell in the header.