I have got two values like this 63/59 innone cell and 18/11 in other cell.I want to add left values and right values ,I have done this using left function
=LEFT(C9,2)+LEFT(J9,2)
but the problem is some time the values is in single digit , then the formula stops working bcoz of this "/".
If I have two columns like so with Processor speed in the left and number of processors on the right:
SPEED NO OF CPU
7282
7282
7282
7281
7282
7301
7301
7302
7301
7301
7301
7301
7312
7312
7311
7311
SPEED ranging from 75 to 2000 or so Mhz, as many or as little multiples of each speed. I wish to go through this list using a seperate list of distinct values, and count the total number of CPUs for that SPEED. So, for the extract above I could manually tell you that there are a total of 8 processors running at 730Mhz
It would be nice to have a list of distinct vaues with a total count of CPUs to the right of each SPEED
730 8
731 17
756 9
834 2 etc
I have been trying to adapt a couple of the posts I've seen on this topic but they seem to refer to counting in rows and I'm having trouble translating that to columns.
I have a simple situation. I have 1s or 0s in columns from left to right. I only want to count the first occurrence of consecutive "1"s and only if the series starts with "1" in the left most column. (I am trying to calculate consecutive years of giving and the columns are FY14, FY13, FY12, etc. Only people who gave in FY14 would count.)
Example:
Row 2: 11101010
Row 3: 11001011
Row 4: 00100110
I would like Row 2 to count "3", Row 3 to count "2" and Row 4 to count "0".
Im going to try to make this as clear as possible. I cant use my actual data because it wouldnt make any sense to anyone so Ive made up an example problem. Here goes...
Lets say in Sheet 1 I have two descending columns of data. Column A is MODEL of Vehicle (Civic for example). Column B is vehicle identification number (xxx for example). Sheet two has 4 columns of data, but only one is really required for this example. Cell A1 is the MAKE of vehicle (Honda for example). Directly below that in Cell A2 is the MODEL of the vehicle (Civic). There are then a few rows of empty space until it gets to the next vehicle MAKE and MODEL.
So in Sheet1 there is a long list of MAKE's in ColumnA and VIN's in ColumnB. Sheet2 Has a long list of MAKE's and MODEL's in ColumnA and random data in other columns.
What I want to do is assemble a Macro to start in Sheet1-A2, read the MODEL then copy the corresponding Vehicle Identification Number in B2. I then want it to go to Sheet2-A2 and start searching downward until it comes across a matching MODEL. Once it finds the match I want it to step downward 2 cells and paste the Vehicle Identification Number. Then return to Sheet1-A3, and repeat the process until EOF.
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
I have over 600 rows that needs this done.
1,2,3,4
B
[Code]....
how do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View RelatedI am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
[Code] ....
toggle-2.xlsb
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
compare some list of values in order to fiind the common values.
View 1 Replies View RelatedI am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.
View 2 Replies View RelatedOne aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.
To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:
[Code] ....
This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies View RelatedI would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"
Below is a small sample of data, real data is around 100 rows
Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)
I need to create two formulas:
1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.
2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.
I have a problem with the formula that lookup all values in ascending order and returning all the corresponding values. eg: I was intended to lookup for the value in ascending order under the Total Occurrence and returning all the corresponding value under the Nos Group but encountered the same Nos Group was returned when there is same value appeared under the Total Occurrence.
View 3 Replies View RelatedIn sheet1, I have the borrowers and outstanding per employee. In the Area Avg sheet, I have the average borrowers and outstanding in each area as this is the standard for comparison (I got this through the subtotal function).
Now what I have to do is in sheet1, format(change the color) each cell under borrowers which is greater than the average of the relevant area. Since, (in my actual data) the name of the area may be duplicate in different regions, the reference value (average borrowers of the area) from "Area Avg" sheet has to be traced through multiple criteria which are: Division, Region and Area. The same also has to be done for outstanding but the solution can be provided for borrowers only.