Swap Values Of Two Cells
Aug 1, 2006I want to swap values of two cells. can anyone help me on that? Eg. Cell A1
contains the value 20 & cell A2 contains the value 100. I want 100 on A1 &
20 on A2.
ADVERTISEMENT
Swap Selected Visible Cells To Values To Right Of Selection
Feb 12, 2014I am using the code below to "swap" the selected cell values in a column with the ones to the right of the selection. It works fine on unfiltered sheet, but if I apply an Autofilter, it copies both visible and hidden cells, and I only want to swap visible cells. What to modify?
[Code] .....
Swap Cells Across Row
May 16, 2008I am attaching a sample sheet as a reference.
in fact the sheet could contain hundreds if not thousands of rows.
Look at column Player 1, the last 3 characters are AoS.
I want to find any rows where Player 1 has those three characters ( AoS ) and swap them with the contents of the Player 2.
BUT if that swap happens then the following swaps must occur as well:
Contents of Column "Side 1" swaps with Contents of Colum "Side 2"
Contents of Column "Player 1 Pts" swaps with Contents of Column "Player 2 Pts"
Ultimately I want this extended so that is the letters AoS appear in any of the following columns ( Player 4, Player 6, Player 8, Player 10)
the following swaps happens:
Contents of Column "Player 3" swaps with Contents of Column "Player 4"
Contents of Column "Side 3" swaps with Contents of Column "Side 4"
Contents of Column "Player 3 Pts" swaps with Contents of Column "Player 4 Pts"
Contents of Column "Player 5" swaps with Contents of Column "Player 6"
Contents of Column "Side 5" swaps with Contents of Column "Side 6"
Contents of Column "Player 5 Pts" swaps with Contents of Column "Player 6 Pts"
Swap Last Name And First Name?
Aug 10, 2007I have a huge xls of names setup as Last Name, First Name in a single column.
Any formula or somehow to change the entire column to read First Name Last Name. No comma.
Example -
Smith, Joe
Brown, Barry
-------------------------
Output desired -
Joe Smith
Barry Brown
Swap Columns In Formulas Around
May 12, 2013I have column AD where there are something like 2,500+ formulas. I would like to change the columns used in the formulas around. By that I mean the first formula is...
Code:
=SUM(AA6-X6)
...and I would like it to be...
Code:
=SUM(X6-AA6)
Now the thing is, the formulas are not continuous, there are breaks where there is a formula to sum say the previous dozen or so for example, then it skips a couple of rows and I have more formulas and then the sum say for the previous dozen for example and so on.
I just want those cells changed with the particular formulas as above.
Swap Numbers Or Data Around
Jul 30, 2013I have let say column A and I have the date and name John 1913 all the way down to John 1940.
But what I need is a way to turn it around so A1 starts with John 1940 down to 1913.? If I drag down it counts up but I want it to count down if that makes sense.?
Asset Swap Function
May 21, 2008Have 5 columns (A1-E1) with different bond data: (respectively)
Coupon, Maturity, Settlement, Price, Yield (asset swap is F1)
Depending on the type of swap I am performing i want the ASWAP (user-created) function to reference different values within the row.
For example: Swap 1 = settlement, maturity, coupon, price, curve
(curve is a user input single number 1-3)
Swap 2 = settlement, maturity, yield, price, curve (yield in place of coup)
Swap 3 = settlement, maturity, yield, 100, curve (100 for par redemption)
etc. I won't type out all the iterations, not necessary.
The way that I want the ASWAP to recognize which Swap# to use is by inputting a number into a cell beside the Aswap column that I can input 1, 2, 3, etc., and then recalculate to get the desired outcome. Want to keep this a static reference as well as the price at par (each owning their own single cell, not a fill down the columns because there are too many).
So assuming G1 is the Swap# input, and H1 is 100...
How do i write a formula that is capable of reading the input in G1 and outputting the proper swap calc.
My gut feeling was along the lines of nested IF's with the corresponding formula... but i won't mess around in futility on here.
Let me know if this is too confusing without me putting up an example.
Code To Swap Rows
Jul 19, 2007I would like to insert a form control (up and down arrows) into a specfied range of cells in a column - ideally the first column. When the form control up or down arrow of the assigned row is clicked it moves that row up or down essentially swapping positions with the row directly above or below. I've seen this functionality in custom excel applications but my searches for code on this topic have been fruitless.
View 5 Replies View RelatedSwap Ranges On A Worksheet
Nov 29, 2007Right now I have 2 ranges say A and B. Range A is in a worksheet on row 7 and range B is on the same worksheet row 8. What I want to do is make it so that range B gets pasted in for range A and vice versa so that range A in now in row 8 and range B is in row 7.
View 2 Replies View RelatedSwap Contents Of 2 Rows - VBA Excel
Jan 31, 2013Swapping the contents of 2 rows, my code does the operation but it is very slow. Here is my code
Sub swap()
Dim aTemp() As Variant
Dim swap As Boolean
swap = False
Dim row As Integer
row = 19
[Code] .......
Swap The Data Between Two Columns At A Time
Apr 19, 2007Swap the data between two columns at a time. Here are multiple columns to be swaped in one worksheet and I have many worksheets to work with.
Swap/Rotate Chart Axis
Aug 8, 2008I am trying to chart a range of dates, for example. I have some boats that are on contract between dates a and b. I would liketo plot several boats with their contract date range. I have tried using a bar chart, but all the lines start at 0. I got it working using an Excel 2007 Stock chart, however, it is in the wrong orientation. I would like to Rotate the Chart 90 degrees, swap the axis, or find a better method all together. I cannot post the spreadsheet as its confidential.
View 2 Replies View RelatedPivot Table Chart - How To Swap X And Y Axis
Dec 4, 2012My pivot table shows Towns as the Row headings and Month as the column headings. When I do a Chart, I get Towns on the X axis and Months as Y. I want the chart to show all my May data in a stacked column, then all my June data in another stacked column, etc. If I pick "Select Source Data" the options are greyed out. What's a mother to do?
View 1 Replies View RelatedSwap Series In Stacked Area Chart
Sep 11, 2007I have an interactive chart displaying stacked area charts for 2006 and 2007
I currently have 2006 in front of 2007, but as the user chooses 1 of 20 units, it will look better to move 2007 in front of 2006
Swap Out Text In Text Box Based On Radio Button Selection
Dec 12, 2012If the user selects French (radio button selection), I want to swap out the existing English text for French and vice versa. One large text box with several paragraphs. Can Excel do this?
View 2 Replies View RelatedSwap 2 Mouse Click Selections After Resizing Selections
Jul 7, 2013I am trying to take two random Mouse click selections and swap a set of ranges associated with the cells that are selected. For example if the user clicks on A1 it will resize(3,22) and store the selection as a variable to be swapped with another selection. Here is what I have so far but I keep getting a object required error on rngEmp1.
VB:
Sub SwapGroup()
If Selection.Cells.Count < 8 Then
MsgBox "Please Select two Groups to swap. Press and hold 'Ctrl' in between your selections", , "Swap Groups"
[Code] .....
Function To Swap Text From Side To Side
Mar 1, 2014I need function that swaps text from side to side. Text at the left of "x" should be placed at the right side of the "x" and from right to left side:
6x15 -> 15x6 plaah plaah xsomething -> somethingxplaah plaah How to do this?
Determine Values In Cells: Get The Lower Values Between To Cells And Have The Lower Valued Cell Highlighted
Oct 27, 2009I M trying to get the lower values between to cells and have the lower valued cell highlighted,,,i have over 43 thousand lines of data to go throughand i was wondering if there was a quicker way to do this,,,for example cellA1 is $4.25 and cellA2 is $5.25 i want cell A1 to be highlighted,,is there a way?
View 2 Replies View RelatedValues In Each Cells(A) Represented Back At Cells(B) But No Repetition If Some Cells(A) Contains Same Value
Dec 9, 2008I did my search, but cant find and knows what key search to look/type for...
If i have data A1 through A10, such as 1 1 2 2 2 2 3 3 3 3
How can i get column B1 through B3 as 1 2 3 ?
Generating Values In Number Of Cells Based On Adjacent Cell Values
May 22, 2014What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
Replace Values In Range Of Cells With Varying Values?
Mar 14, 2013I am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
Sum The Values In Cells Based On The Values Other Column
Apr 25, 2006I want to sum the values in cells E2:P110 based on the values column D. The
values in D are formulas resulting in something that appears to match D112 in
some cases. I'm using the following equation:
=SUMIF(D2:D110,D112,E2:P110)
My problem is that D2 :D10 have a formula in it and it's not matching. If
I enter the result of the formula, all is good. How should I deal with this?
Sort Rows To Show Values Of Cells In Sequence And Eliminate Empty Cells
Nov 11, 2013I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedForcing Cells To ALWAYS Find MIN And MAXIMUM Values From A Specific Range Of Cells
Feb 1, 2010I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
Count Number Of Blank Cells In Range Starting And Ending Will Cells That Match String Values
May 13, 2013I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
Count Unique Cells Based On Ajacent Cells Having Values
Jan 6, 2008I have the following data in 1 of the tabs.
[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?
Sum Range Of Cells Depending On Changeable Values In Other Cells
Aug 2, 2012Assuming I have a data set like this :
column a column b
916 12,5
916 23,4
923 34,5
923 23,9
932 98,6
934 67,7
How can I get a sum of all cells in column b when values in column a are equal?
How To Auto-Sort Cells Base On Values In Other Cells
Nov 26, 2012What is the formula for results in C?
A | B | C
NAME|RNK|SORT
Frank|2|David
Jane |3|Frank
Lisa |5|Jane
David|1|John
John |4|Lisa
Abby |6|Abby
Add Values Of Cells From Different Columns To New Column Only If Cells Are Not Blank
Feb 28, 2014I have an excel file and what i want is to sum two different columns to a third one, however there are some important notes:
1. Column A has dates
2. Column B has numbers f.e. 25, 30, 35 etc. , which have to be added to dates of column 1 , so a new date will be created in the new column
3. Colums A and B are not next to each other.
4. Some cells of column A and column B are blank , actually columns are sth like this
A B C
5/2/2014 25
blank blank
8/5/2014 35
10/9/2014 30
blank blank
When a date value occurs in a cell of column A , then always a number will occur in column B
When a cell is blank is column A , then the respective cell of column B will also be blank
What i want is to add values of column A and B to create column C automatically ( each column has 1000 cells ) , however in case of blank cells , i want a blank cell in column C, not something like #####
Apart from this , i want in the future , when i expand column A and B , when values are entered there, i want column C to be created automatically.
Shading Cells If Values Exist In Same Cells On Another Sheet
May 6, 2008We have a simple holidays workbook, with seperate sheet tabs for each member of staff in the department to note down there holidays in a calendar.
The 1st row (from B1 and onwards) contains the day numbers of the month, ie. 1 - 31
The 1st column (A2 downwards) shows the 12 months of the year.
The holidays are then marked in the relevant cell matching the dates required. The codes we use are F (full day), A (morning), and P (afternoon). A countif adds up all the occurences of the various codes and totals the ammount of used/remaining days.
Hopefully that drew a picture.
The problem is, each sheet only shows the holidays marked down for that person. There is no way of checking for a "clash" (ie. 1 member of staff off on the same day as another) without flicking to the other sheets and checking yourself.
how can I get a cell shading to automatically show up on the sheets, if there is a holiday noted down (ie a value, A, P or F) in one of the other sheets?