when I reference the information in worksheet 1 with worksheet 2, and I have no info in worksheet 1, I get zeros in worksheet 2. is there a way to have the cell show up empty until there is information worksheet 1?
View 9 Replies=IF((C13>E13)*AND(B15>D15),0,1)*OR((E13>C13)*AND(D15>B15),0,1)
This function seems to work well, however there is one thing I want to add to it somehow, and I can't seem to make it work. I want the cell to show a zero if there is no information in cells C13 and/or E13.
I have this formula in a cell on one sheet: =IF(Expenses!E8,Expenses!E8,"") obviously referring to cell E8 on the "Expense" sheet. Cell E8 has either a word, not a numeric value, or is blank. In the cell with the formula, I want it to either appear blank, or display the word in cell E8. Using the formula above, if E8 is blank, the referring cell is blank. If I have a word in E8, I get the #VALUE display in the referring cell.
View 3 Replies View RelatedI'm using Excel 2003 and have a main workbook which stores the quotes, invoice, worksheet and contact details. In order to email only the invoice to a customer I have created another workbook which replicates whatever is shown in the open invoice tab of the main workbook. A macro from the main workbook then opens outlook.
I attach a sample of both for information. My problem is this - You will note that on the email invoice that any entries where there is no cost in the main workbook, that it shows "£ -". how to get it to show an empty cell if no value in the main workbook?
How can I set a formula to populate a cell if another cell is non-blank? I want a cell to display a number if another cell is not blank.
I'm guessing its an IF formula but I can't get it right.
I'm using Excel 2002 and am having trouble with what I thought was a simple conditional command. On part of the spreadsheet I have 3 columns: Hours (D5), Cost Per Hour (E5) and Total Cost (F5). Here's what I'm trying to do.....
If there is no value in the Hours then the Total Cost should show an empty cell and conversly if there is a value in Hours then calculate Hours*Cost Per Hour in the Total Cost cell. My condition for cell F5 is as follows: =IF(D5="","",SUM(D5*E5)). Whilst it works if there is a value in D5, when empty F5 shows #VALUE!
if there's a way to find the first non-empty cell in a worksheet?
Here's what I'm trying to do, the incorrect syntax is underlined:
If IsNotEmpty(123, 2) Then
'Execute some code
End If
I am need of some code that I can assign to a button that will take a user to the first empty row of another worksheet in order to do some data entry. I only need to look in column A, which is titled "Tag Number."
View 2 Replies View RelatedI am currently trying to adapt the Macro I created that copies and pastes from one work sheet to another. I need to paste to the first empty cell in A column. See the code I have listed below.
Sub Button15_Click()
Selection. AutoFilter Field:=1, Criteria1:="<>"
Range("A2:E78").Select
Selection.Copy
Sheets("WorkSheet").Select
Range("A17").Select
ActiveSheet.Paste
Range("C17").Select
Application.CutCopyMode = False
Range("A1:E13").Sort Key1:=Range("A1"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Sheets("XH & HVYR").Select ..........
When the worksheet is changed;
-For each row between A3 and A5000
-If cell in column L is empty
-Do Nothing and move on to next row
-Otherwise if cell in column L is not empty
-Copy entire row to alternate sheet, and delete row from original sheet.
-After all rows between A3 and A5000 have been checked, sort alternate sheet in ascending order based on the contents of column A.
The issue is that the code keeps skipping some rows that should be copied, possibly due to the 'for each' command not liking how I'm deleting rows (maybe?)
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rCell As Range
Dim lRow As Long
lRow = Range("A3:A5000").Rows.Count
[Code] .....
On some of my worksheets, the slider bar on the right has become a small square rather than a long rectangle. This causes this slightest shift downward to jump through large amounts of rows. Excel seems to think there must be data down there I need. How do I get rid of empty cells at the bottom of a worksheet so that this no longer happens?
View 2 Replies View RelatedI have been helping a friend keep track of his clients, by making a form for them to fill out when they become a client of his (he owns a care rental) and I made a spread sheet for him to keep track of which cars are out when...
With that said, I would really like to have a Macro that i could run, when the form with all the personal information about hte client had been filled out - take that information and pull it over into another spead sheet that keeps track of all clients.
Meaning that workbook 1 is set up as a booking form and workbook two is just a normal list. I can make a macro that pulls over the infomation - but the problem is that it will always pull the information into row 1. Meaning that it overwrites itself each time I run it. I would like the Macro to know that it has to fill the information into the next empty row.
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
I am modifying a template from MS's site. Its a recipe tracker.
They have one sheet with a table on it. Some of the data in this table is pulled, using a formula, from the different worksheets (recipes). The particular formula they use is this:
However, when I try to do my own version of it, simply changing the '!Category' portion, it doesnt work. The cell just shows the formula and I cant figure out why. Sometimes, Ill type out the same formula that they have working and it doesnt work, which makes no sense to me.
Here is the template for reference: [URL] .........
I am having trouble getting my search information to show under the column headings in the listbox. My search reference is column E and I want to show the information for column F, I and A of the same row as the search match. Here is my code and a copy of the file I am using.
View 2 Replies View RelatedTo minimize the amount of time I spend building reports each day I consistently reuse existing pivot tables for my daily reporting by deleting the data a pivot table is based on and inserting new data. When I refresh the pivot table the new information is shown.
However, I have noticed that the drop down filters in all my pivot tables are showing selections that existed in previous data but are not in the current set of data.
Is there a way to update the pivot so that the drop down filters only show selections that are pertinent to the current set of data?
I have an excel file with 2 tabs. tab 1: Active and Tab2: tenure. Tabe 1 has the following column headers
Manager
Employee Name
Dept
Assignment
Original Start Date
End Date
Bill Rate
The Employee names may be repeating in this tab becasue whenever the employee is extended for a new assignment he has a new start date and new end date and new assignemtn and rates....This helps track the historical information about the employees. TAB2: (tenure) also has the following column headers...................
On the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
I have a Sheet1 that contains 900 rows of information 14 columns wide (C7:P7 are headers). Column M has an important date. The information is constantly changing.
On Sheet2, I want to display the upcoming dates, in numerical order for each row that's within 5 days of today's date. After the date has passed, it no longer needs to display on Sheet2.
I need to show an information box e.g. "Initialising..." that I can show and remove without user interaction. I can't seem to find this using either a userform or msgbox.
View 5 Replies View RelatedI have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I realize that this is a topic that has been well tread in the forums; I've read many of the responses. Unfortunately even after adapting these responses, my code isn't working as I would hope. I have many textboxes on a userform, and often they can be left without any input from the user. Unfortunately the textboxes serve as the arguments for a function. If the value is zero, the function works as it should. Here is the code I have:
Private Sub txtSalary_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim Salary1
If IsEmpty(Me.txtSalary) Then
MsgBox ("It's empty")
Val (Me.txtSalary.Text)
Me.txtSalary.Value = "0"
Else
Me.txtSalary = Format(Me.txtSalary, "$0,000")
End If
The idea was that when the user left the box, if it was empty it would have a value of 0, but if it had a number, it should be formatted to currency without the decimal point. Unfortunately, the "IsEmpty" line doesn't seem to be working. I tried to just use a simple msgbox to check, but when I tab out of the textbox without typing anything, nothing happens. If sure there must be a simple solution I'm missing.
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies View RelatedPlease see attached workbook. I know for a fact this isn't the most effective way to do this, but I just needed something really quick for a small worksheet that my department at work is using. A1:C7 are supposed to represent 3 different types of "methods" In the case of my worksheet, I just typed random stuff.
Basically, I have data validation in B10. Depending on which one I select (1 corresponds with A1:A7, 2 with B1:B7, and 3 with C1:C7), it is supposed to populate that data. I've done this with nested if statements in D10:D16. The issue is that for options 2 and 3, it shows 0's where the blanks should be.
In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
i am having trouble putting together an IF Formula together with and/or. i need to do the following
if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.
=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))
i have tried if(and) and if(or) and no matter what i have tried it doesnt work
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....