I have this formula in a cell on one sheet: =IF(Expenses!E8,Expenses!E8,"") obviously referring to cell E8 on the "Expense" sheet. Cell E8 has either a word, not a numeric value, or is blank. In the cell with the formula, I want it to either appear blank, or display the word in cell E8. Using the formula above, if E8 is blank, the referring cell is blank. If I have a word in E8, I get the #VALUE display in the referring cell.
View 3 RepliesI'm using Excel 2003 and have a main workbook which stores the quotes, invoice, worksheet and contact details. In order to email only the invoice to a customer I have created another workbook which replicates whatever is shown in the open invoice tab of the main workbook. A macro from the main workbook then opens outlook.
I attach a sample of both for information. My problem is this - You will note that on the email invoice that any entries where there is no cost in the main workbook, that it shows "£ -". how to get it to show an empty cell if no value in the main workbook?
How can I set a formula to populate a cell if another cell is non-blank? I want a cell to display a number if another cell is not blank.
I'm guessing its an IF formula but I can't get it right.
I'm using Excel 2002 and am having trouble with what I thought was a simple conditional command. On part of the spreadsheet I have 3 columns: Hours (D5), Cost Per Hour (E5) and Total Cost (F5). Here's what I'm trying to do.....
If there is no value in the Hours then the Total Cost should show an empty cell and conversly if there is a value in Hours then calculate Hours*Cost Per Hour in the Total Cost cell. My condition for cell F5 is as follows: =IF(D5="","",SUM(D5*E5)). Whilst it works if there is a value in D5, when empty F5 shows #VALUE!
when I reference the information in worksheet 1 with worksheet 2, and I have no info in worksheet 1, I get zeros in worksheet 2. is there a way to have the cell show up empty until there is information worksheet 1?
View 9 Replies View RelatedI have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I realize that this is a topic that has been well tread in the forums; I've read many of the responses. Unfortunately even after adapting these responses, my code isn't working as I would hope. I have many textboxes on a userform, and often they can be left without any input from the user. Unfortunately the textboxes serve as the arguments for a function. If the value is zero, the function works as it should. Here is the code I have:
Private Sub txtSalary_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim Salary1
If IsEmpty(Me.txtSalary) Then
MsgBox ("It's empty")
Val (Me.txtSalary.Text)
Me.txtSalary.Value = "0"
Else
Me.txtSalary = Format(Me.txtSalary, "$0,000")
End If
The idea was that when the user left the box, if it was empty it would have a value of 0, but if it had a number, it should be formatted to currency without the decimal point. Unfortunately, the "IsEmpty" line doesn't seem to be working. I tried to just use a simple msgbox to check, but when I tab out of the textbox without typing anything, nothing happens. If sure there must be a simple solution I'm missing.
Please see attached workbook. I know for a fact this isn't the most effective way to do this, but I just needed something really quick for a small worksheet that my department at work is using. A1:C7 are supposed to represent 3 different types of "methods" In the case of my worksheet, I just typed random stuff.
Basically, I have data validation in B10. Depending on which one I select (1 corresponds with A1:A7, 2 with B1:B7, and 3 with C1:C7), it is supposed to populate that data. I've done this with nested if statements in D10:D16. The issue is that for options 2 and 3, it shows 0's where the blanks should be.
In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
i am having trouble putting together an IF Formula together with and/or. i need to do the following
if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.
=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))
i have tried if(and) and if(or) and no matter what i have tried it doesnt work
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI have a column of data held in column B.
I am required to show the following.
If there is data in the cell then it is to be left. If there is no data in the cell then I would like to show the value 0.
I have tried using a circular reference, using the formula =IF(ISBLANK(B1),0,B1) and other similar formulas but they dont work as the formula overwrites the data in it.
do I need a macro?, or conditional formatting?
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedIs this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI'm trying to create a tag with a color border. What I desire is to fill the BLANK cells around the tag, A1:D1 + D1:D19 + A1:D19 + A1:19 in a certain color based on the text value of the cell B11. There are 5 different values, such that if the B11 read Red Sox - the boarder is going to be red, if it reads Houston Astros it will be dark blue, etc..
I have a similar problem with changing the color of the cell based on the month. So regardless of the year, 2014, 2015, 2016, etc... If I use MONTH() function I can just get numbers from 1-12. I want Cell C16-C18 to be certain color depending the date entered in cell C17 such that for each quarter, months 1-3, 4-6, 7-9, 10-12 they are different color.
I have had no luck with conditional formatting (and I also believe that it is good up to 3 cases only). I am decent in logic/programming language but have little knowledge with macro notation and especially how to run them in excel 2013. I do know how to start it alt+F11 and that I need to make sure that code is written under the specific sheet where my tag is located.
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
How to format a cell to be normal color unless cell left of it is not empty and this cell is empty.
And I need to format whole sheet to this rule.
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
I wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"