I have a sheet that counts stock, in cell I5 i have week 4s results in k5 week 5s. what I need is in cell N5 the number in I5 if their is no number in k5 but if k5 has a number in it I want that number in N5
View 14 RepliesI need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedWhat I'm trying to put together is a sheet where i work out how much margin i will be making on a sale (which i done). The bit I'm stuck with is the recording the data on a separate sheet.
What i have done so far.
I created a Macro button to insert and copy cells C6, C7 & C8 (the bits i need). Which works but it takes the formular with it so everytime i chage the figure on sheet 1 it changes in sheet 2.
So what i'm asking is there a way to mirror what is display rather that copy?
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
Here is what I am trying to do with no luck so far.
If I type RS23U1R109000 in a cell A1, I want B1 to read the 5th letter or
number and fill B1 with E86.
Example
A1= RS23U1R109000 B1=E86
A1= RS23V1R109000 B1=E87
A1= RS23R1R109000 B1=E84
As you can see in my example, the 5th letter could be U,V,R or whatever, but
I need cell B1 to read that letter and populate B1 with E86, E87, E84 or
whatever.
my spreadsheet to return the word unit if cell a18=1 or the word units if its over 1 but i also want the cell to remain empty if there is nothing input into cell a18 is this possible
I am trying to have one cell automaticall input infromation based on another cell. For example, if A1 = 10, then I want B1 to automatically equal 20.
The formula I am using in B1 is as follows - =if(A1="10","20","")
I have 2 problems though:
1st - I don't want to put the furmula in any cell because other information is put in there also. I tried putting it in conditional format but I don't think it is meant for such usage. Also, I already have something in data validation. so I can't put anything there because to my knowledge you can only put one validation per cell.
2nd - I have multiple numbers (around 7) that I need to be automatically inputed along the columns.
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI am not sure how to go about creating a spreadsheet that does this:
I have a number much like a stock market index which is in cell A1 for instance, and this data changes every second,
And I wish to create my spreadsheet to automatically make a record of this change value and populate it at the last available blank row, so ultimately, I have a full history of how this number changes during the course of time.
5450 in cell A1
a second later, it changes to 5430
and so I want to populate 5430 to A2
and then another second, it changes from 5430 to 5470 and so i want to populate 5470 to A3 and so forth....
does anyone know how to do it?
The spreadsheet is used to keep track of shares that are purchased / sold
It will make all tax calculations as well as provide a single statement showing all transactions rather than having to sort through dozens of individual statements.
I seem to have most of it working but could use some help with the following.
I would like to be able to have a spot (maybe on a separate worksheet) where you could enter the four items from which everything else is derived, share price, date, number of shares and whether it was a purchase or a sale, and have it automatically:
1. add a new row (complete with formulas and formatting info) to display the new information
2. sort the new data to fit into the right spot in the spreadsheet by date.
How to click a button to automatically combine a few cell data and save it as the file name ?
The file name i want to save, is in this method.
( Date 2013-07-22 ) + ( Cheque No UOB000000 ) + ( ReceiverName ) + ( InvoiceNo L123456 ) + ( Payment Voucher Code ) + ( Amounts $1111111 )
______V5___________________E17___________________D11________________O9______________Add word ( PV )_____________W16
Sample File name : 2013-07-22_UOB000000_TransAuto_Inv778899_PV_$$$$$$$
I tried to add this code : FName = ActiveWorkbook.Sheets("Payment Voucher").Range =("V5&"_"&E17&"_"&D11&"-"&O9&"_"&"PV"&"_"&W16")
But getting error.
Than i tried to group all the cell data into cell (E11) and than select as range (E11), but when i tried to group it, the beginning the file name instead of i want it to be the date 2013-07-22_UOB........ it become 41113_UOB............
I receive a huge spreadsheet with account numbers in col A and names in col b with dates in col g and amounts in h. However if there is more than one date and amount for the same account number and name, the people/program who originated the data left those fields blank.
In order to sort the list by name by date, I have been manually copying the data from the row immediately above to the blank row(s). (L O N G process) So if I have ...
So i have two sheets with user info and so on, my boss asked me if i can transfer person names from sheet1 to sheet2 but each name must be in correct place acordingly to username column
Capture6.jpgCapture7.PNG
in capture6: in F18 you see 139401arle and G18 is supposed to be his name but it's in other shhet as you can see
in capture7 his name "Ar Sveinung Leira" is in E5
is there any way to transfer names so that they go in right place?
Kopi av Computer List - 02 12 2013.xls
I have names in cells in this format.
Smith John
I would like to switch that around so the name in the cell looks like this
John Smith
Is there an easy way to do this?
I have about a 100 sheet workbook for a project my company has upcoming. All the sheets are numbered 1-100. I also have another sheet that has the description of each pay item on ROW B of the sheet. Well here's my question. I'm trying to get a function that i can just copy and paste in each sheet instead of changing the number on each sheet.
For instance...
I would be using =Descriptions!B2 for sheet 2, and then =Descriptions!B3 for sheet 3 and so on. My question is does anyone know how i can get the sheet name so then i could just copy and paste one function that would be like =Descriptions!B(SheetName)
So that way i can just copy and paste instead of having to change it each time. I found this function to get the sheet name but can't seem to incorporate it into the =Descriptions!B
Is it possible to extract certain info from one cell. Example in cell A I have a description of a product plus price I only need the price, The price has a $sign in front of it. Example below
I have over 2000 products so I was hoping I wouldn't half to go through one at a time. Is is possible to extract just price and place it into cell b.
1 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $22.50 Stock Quantity: 107 YD
2 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $28.50 Stock Quantity: 107 YD
3 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $19.50 Stock Quantity: 107 YD
4 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $119.50 Stock Quantity: 107 YD
5 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $67 Stock Quantity: 107 YD
6 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $89 Stock Quantity: 107 YD
7 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $25.50 Stock Quantity: 107 YD
8 and so on
I am trying to get info from a cell/Row of the height just like "=CELL("width",A1)" Only I need Height info returned, is this possible?
View 10 Replies View RelatedI need a macro that will, on a button click, save a workbook and naming it what is in cell B3 and B5.
View 9 Replies View RelatedI have a cell that has address and city with postal code.
I need to be able to extract the city and postal code on its own.
I know i could do Data - Text to columns but i would like to keep the cell intact and not have to split it up.
Here is an example of the cell in question:
1234 Parc street, Montreal H1A 2N2
I am trying to come up with a formula that will allow the commission calculation to be done automatically once data is inputted in cell A2 and E2. I have tried IF statements, but can not figure out how to make it work. I am not able to figure out how to get cells F9 and F19 to work with the proper formula.
View 4 Replies View RelatedI have two workbooks. I am copying cells data from one workbook A to workbook B with macro - pretty easy. Now, after selecting and copying cell data in workbook A and switching to workbook B I want to be able to pause the macro and wait for the user to chose a correct cell where he/she wants to paste the data. After the selection the macro would automatically paste the data in selected cell. Since I am completely newbie any help would be appreciated. Here is the macro I have so far :
Sub CopyVIN()
'
' CopyVIN Macro
' Macro recorded 5/26/2009 by Pacific Coachworks
'
Sheets("Sheet1").Select
Range("G9:R9").Select
Selection.Copy
Sheets("For copying VIN").Select
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
Selection.Copy
Windows("Cami's Production Schedule.xls").Activate
' Here I'd like to have a code for waiting for a user selection and pasting the data automaticlly.
End Sub
I own a Hair Salon which collates its daily takings using a spreadsheet. A section of this takings sheet asks staff to enter which Products have been sold and what they where sold for (RRP), so that once all products have been entered, totals at the end of the day allowing the end -of-day "till-up" process to reconcile purchases and services rendered aginst cash and cheques received.
Unfortunately there is over 600 products to choose from and this evergroes as new products are introduced by manufacturers. Names are long and often very similar, and product price manual listings are slow to reference, therefore the customer has to wait while the staff find the right product and select the right price.
All of this is subject to human error. What i would like is simply to enter part of the product name into a Cell and the right product to be visibly selectable and the price automatically added to an adjacent cell.
I have a long spreadsheet that is formatted and organized with six digit codes on the left, and then several lines of information on the right, in order to sort and compare to another report, I was trying to replace the blanks in the digits on the left....
View 7 Replies View RelatedI created a small block of cells on my worksheet where i have in separate cells, the day of the week, the days date and the month. I want to design a special memory calendar for my mom in early stages alzheimers.
There are cells with specific info which i do not want to re type for the whole month/year.
I want to be able to copy all the info into another block of cells and have the day of the week and date change also the month.
Whenever I get information from finance.yahoo.com or from my job and put it into excel all the information seems to go in one cell and numerous rows. (I think its b/c I am putting information that isnt' meant to be in excel and forcing it to open up there.)
For Example in cell A1 I will have
"AIG , AMER INTL GROUP I , 66.08 , 1:16pm , 169.455B , 16.736 , 2.01 , 9.47 , 0.78"
Cell A2 I will have
GOOG , GOOGLE , 508.9 , 1:21pm , 158.845B , 22.361 , 17.511 , 26.29 , 1
What I want to see is cell A1 as AIG and cell B1 as 66.08 and cell A2 - GOOG and cell B2 508.9. I don't even want the rest of the stuff.
Is there any way or formula I can use to just pull the information out of cell and have it separated for me?
I have 40,000 part numbers that range in style.
For example:
13538-AL
BC-DIB-13
13750U
13762-1
I want to take all the numbers that have the ending tag "-XX" that are LETTERED but NOT the numbered combo (just like example 13538-AL) and remove the tag to just have the root 5-digit number.
I have all the end tag combos I would like removed. SO if I needed -AL, -LG, -CG, -SS, etc. removed, I would need the formula that would find all the 5-digit numbers with those end tags and remove those tags, leaving the other numbers alone.
I want to be able to change 2 cell info based on 4 checkboxes used. So based on a check box i check, it will populate what info i assigned to it the box. See below,
1 cell12342 cell
I have 4 checkboxes and 2 cells i need populated by whatver box i check. I have the following formula, but not sure how to tie in all the cells together.
=IF(A1,"Checked message",") If 1 CELL gets changed when checked, i need 2 CELL to change as well. Example, I checked box one and so 1CELL should change to, lets say to a set dollar amount like $12, and then 2CELL would also change to another entry say a set dollar amount, like $15 or whatever both based on checkbox one. BUT i also want to populate those same 2 cells with different amounts if i check the other boxes.
Usually you press the enter key or any of the arrow key to enter cell information. Is is possible to press a commandbutton to enter the cell information and perform some operations without pressing the enterbutton first?
Rang655
I need a macro thaw sends a mail to a specific address (and CC) based on a critiria in a cell. This is the code I have. It does not send the mail.
[Code] .....