I want to be able to change 2 cell info based on 4 checkboxes used. So based on a check box i check, it will populate what info i assigned to it the box. See below,
1 cell12342 cell
I have 4 checkboxes and 2 cells i need populated by whatver box i check. I have the following formula, but not sure how to tie in all the cells together.
=IF(A1,"Checked message",") If 1 CELL gets changed when checked, i need 2 CELL to change as well. Example, I checked box one and so 1CELL should change to, lets say to a set dollar amount like $12, and then 2CELL would also change to another entry say a set dollar amount, like $15 or whatever both based on checkbox one. BUT i also want to populate those same 2 cells with different amounts if i check the other boxes.
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click() Dim rClSkills As Range Dim rClLookup As Range Dim var1 As Integer Dim iDecision As Integer Set rClSkills = Range("TblClSkills") Set rClLookup = Range("ClassLookup") iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?") If iDecision = vbYes Then var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0) If CboAppraise.Value = True Then.............................
I am trying to change checkboxes caption name using a loop so that I don't have to change them individually. Here is a simplified example of what want to do:
1) I save the caption names in a array 2) I run through a loop to rename each checkboxes using the names saved in the array
Sub change_Checkbox_Caption Dim MyArray(1to3) as string Dim IndexMyArray as integer MyArray(1) = "YES" MyArray(2) = "No" MyArray(3) = "Maybe"
I have an excel sheet where I can enter a text into A4, when this is valid a checkbox1 will appear if there is no value then the checkbox is invisible.
I have used a macro 'worksheet selection change' to do this but unfortunately I can only use this once in a sheet. I need to do this for upto 10 checkboxs that corrospond sequentially with text starting at A4 for checkbox1, A5 for checkbox2 etc....
The routine I have used for one check box is below. Can this be changed for multiple checkboxes?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Range("A4") = isblank Then CheckBox1.Visible = False Else CheckBox1.Visible = True End If End Sub
I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
I would like to be able to add a checkbox linked to each sum cell that adds the values of each of those cells.
Ex: A5=4, B5=6, C5=1, D5=7. With a checkbox linked to each cell, if i check the boxes in A5 and C5 then in another cell i would get the sum of those two cells= 5.
I've tried this but every time i link a checkbox to the sum cell it deletes the formula and puts in a True or False result.
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
So I have an 2 ActiveX button and 2 ActiveX checkboxes. I have it set up so that the Split button will enable when both checkboxes are checked. The ClearAll button has a code/macro in it that will check the "Cleared All" checkbox when the Clearall button is pressed.
My problem is with the "Populated Data" checkbox. I want it to check/uncheck itself if there is anything in Range("A1") of a tab called "Data".
I dont know if this can be done, but is it possible to automatically fill a column with check boxes which correspond to data in adjacent cells? I am aware of the marlett method, but Im really looking for some sort of rigid check box appearance, where the user just needs to click, and not type a, or y, etc. I have a macro which outputs a column of numbers in column A, and I would like to figure out if it is possible for a macro to automatically add check boxes in column B for all the values which show up in column A.
This is so that when the user selects some check boxes, the corresponding values in column A are then each copied to copies of a specific sheet, thus creating a multiple copies of the same worksheet for each value. This sounds like it could make a huge memory problem (from what I've read), but Im really dealing with a very small amount of data.
I have a sheet with around 3,000 rows of data. I need to be able to enable/disable different comibinations of three checkboxes based on the value of a cell in column D as follows:
If Band says £0k - £75k then all three check boxes should be disabled If Band says £75k - £250k then the Step 1 check box should be enabled but the Step 2 and Step 3 check boxes should be disabled If Band says £250k - £500k then the Step 1 and Step 2 check boxes should be enabled and the Step 3 check box should be disabled If Band says £500k plus then all three check boxes should be enabled
When a checkbox is disabled I'd like it to appear visible but greyed out so it is obvious the option is not available, maybe via conditional formatting. I don't know if this can be achieved within any code rather than having to manually add conditional formatting afterwards?
I've attached a sample to demonstrate. Is this possible to achieve? I'm open to alternative approaches as well if this makes things easier to do. The mere idea of adding 9,000 plus check boxes if already scary!
As soon as i mark checkbox1, i want to send the checkbox Caption to A1. Then if i choose checkbox5 and mark it, i want to send the checkbox Caption to A2, which is in this case next cell available on colA.
I need to create a long series of checkboxes in which each box is linked to the cell directly to the right of it. When I try to copy and past the checkbox, the link doesn't update. Which means I have to go in manually and change every checkbox link.
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Here is what I am trying to do with no luck so far.
If I type RS23U1R109000 in a cell A1, I want B1 to read the 5th letter or number and fill B1 with E86.
Example A1= RS23U1R109000 B1=E86 A1= RS23V1R109000 B1=E87 A1= RS23R1R109000 B1=E84
As you can see in my example, the 5th letter could be U,V,R or whatever, but I need cell B1 to read that letter and populate B1 with E86, E87, E84 or whatever.
I have about a 100 sheet workbook for a project my company has upcoming. All the sheets are numbered 1-100. I also have another sheet that has the description of each pay item on ROW B of the sheet. Well here's my question. I'm trying to get a function that i can just copy and paste in each sheet instead of changing the number on each sheet.
For instance...
I would be using =Descriptions!B2 for sheet 2, and then =Descriptions!B3 for sheet 3 and so on. My question is does anyone know how i can get the sheet name so then i could just copy and paste one function that would be like =Descriptions!B(SheetName)
So that way i can just copy and paste instead of having to change it each time. I found this function to get the sheet name but can't seem to incorporate it into the =Descriptions!B
Is it possible to extract certain info from one cell. Example in cell A I have a description of a product plus price I only need the price, The price has a $sign in front of it. Example below
I have over 2000 products so I was hoping I wouldn't half to go through one at a time. Is is possible to extract just price and place it into cell b.
1 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $22.50 Stock Quantity: 107 YD
2 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $28.50 Stock Quantity: 107 YD
3 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $19.50 Stock Quantity: 107 YD
4 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $119.50 Stock Quantity: 107 YD
5 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $67 Stock Quantity: 107 YD
6 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $89 Stock Quantity: 107 YD
7 "Damask 100% Silk Color: Creme Approx Width: 55"" Approx Rpt: V. 16, H. 13 Reproduction Circa: Late 16th Century Renaissance Revival Price $25.50 Stock Quantity: 107 YD
I have four cells that contain text. All have connected check boxes with TRUE FALSE.
I need to be able to select anyone one of these cells with a check box, and have it's text appear in one separate cell eg: A1.
I have no issue connecting check boxes etc. I have no issue reproducing the text from any of these cells into multiple cells with a check box. But they have to be selectable and reproducing in one cell only (eg"A1").
I have a long spreadsheet that is formatted and organized with six digit codes on the left, and then several lines of information on the right, in order to sort and compare to another report, I was trying to replace the blanks in the digits on the left....
What I'm trying to put together is a sheet where i work out how much margin i will be making on a sale (which i done). The bit I'm stuck with is the recording the data on a separate sheet.
What i have done so far. I created a Macro button to insert and copy cells C6, C7 & C8 (the bits i need). Which works but it takes the formular with it so everytime i chage the figure on sheet 1 it changes in sheet 2.
So what i'm asking is there a way to mirror what is display rather that copy?
I created a small block of cells on my worksheet where i have in separate cells, the day of the week, the days date and the month. I want to design a special memory calendar for my mom in early stages alzheimers.
There are cells with specific info which i do not want to re type for the whole month/year.
I want to be able to copy all the info into another block of cells and have the day of the week and date change also the month.
Whenever I get information from finance.yahoo.com or from my job and put it into excel all the information seems to go in one cell and numerous rows. (I think its b/c I am putting information that isnt' meant to be in excel and forcing it to open up there.)
For Example in cell A1 I will have "AIG , AMER INTL GROUP I , 66.08 , 1:16pm , 169.455B , 16.736 , 2.01 , 9.47 , 0.78"
Cell A2 I will have GOOG , GOOGLE , 508.9 , 1:21pm , 158.845B , 22.361 , 17.511 , 26.29 , 1
What I want to see is cell A1 as AIG and cell B1 as 66.08 and cell A2 - GOOG and cell B2 508.9. I don't even want the rest of the stuff.
Is there any way or formula I can use to just pull the information out of cell and have it separated for me?
I want to take all the numbers that have the ending tag "-XX" that are LETTERED but NOT the numbered combo (just like example 13538-AL) and remove the tag to just have the root 5-digit number.
I have all the end tag combos I would like removed. SO if I needed -AL, -LG, -CG, -SS, etc. removed, I would need the formula that would find all the 5-digit numbers with those end tags and remove those tags, leaving the other numbers alone.
