Here is what I am trying to do with no luck so far.
If I type RS23U1R109000 in a cell A1, I want B1 to read the 5th letter or
number and fill B1 with E86.
Example
A1= RS23U1R109000 B1=E86
A1= RS23V1R109000 B1=E87
A1= RS23R1R109000 B1=E84
As you can see in my example, the 5th letter could be U,V,R or whatever, but
I need cell B1 to read that letter and populate B1 with E86, E87, E84 or
whatever.
I have a spreadsheet with info about students in a summer program. I need to pull out the students who have allergies along with what their allergy is and their emergency contact phone number. I would like this new info in a new spreadsheet.
Here is an example of the spreadsheet:
allergiesnamephoneallergy type
nobob410.555.1234
nojim410.555.5843
yesmeg410.555.7458nuts
nolex410.555.1159
yeswill410.555.5005fish
Is there a formula that I can use?
I'm copying and pasting data from a PDF and need to eliminate some unnecessary data. The original .pdf has 4 columns: Account, Dollar Amount, Name, Notes
When I copy this to an excel document, it copies the row from all 4 columns into column A. The two columns I need are Account and Dollar Amount. All account numbers are 8 digits so I was able to create a formula to weed that out with this: =left(A1,8)
The problem I'm running into is obtaining the dollar amount within the cell. For example:
A1 contains: 11112222 $1234.56 Sample, Name Sample Note
I pull the 11112222 with =left(A1,8) in column B but not sure how to pull dollar amount to column C.
Further, the dollar amount varies from $1.01 to $10,000+
I have a list of cities, counties, and schools with dates for each account. I want to put these into a workbook with tabs along the bottom for each one, then I want to be able to select all of the accounts that have a Jan 1st effective date and show them on a list in the first worksheet.
View 9 Replies View RelatedI have a regular table of data and dependent on the info within a column of cells I would like the info to appear within one of 3 new sheets. BUT.... I can't figure it out because the info forms an irregular part of text within the cells in a specific column - Obviously if it was dependent on the whole of the text I could use Vlookup but it's not.
If it needs further clarification, a column of cells may have, say, "blahblah234/PLblah" -> If this cell contains within the text "PL" then it should have the whole of the row in the new sheet, if not then blank.
I am trying to pull info from Access into Excel using Data, Import External Data, New Database Query. I follow the menu and when I get to the end for the info to be pulled to Excel I get an error.
Microsoft Query:
Too Few Parameters. Expected 1.
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedI have monthly reports of sales by client number. I am now trying to pull the annual sales info by month for one client by name. Eg. each month, XYZ ltd has sales figures for various products. Is there a way of me grabbing all his sales info for the year with out having to open each spreadsheet
View 3 Replies View RelatedI am accustomed to using filters to find a lot of my information in large datasets.
However, now I am trying to use formulas to return specific values. For simplicity's sake, I have included a sample below with a couple types of scenarios I am looking to solve through the use of formulas. Would this involve sub-arrays perhaps?
sabinfire1.xlsx
Excel questions.docx
For the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I have found a code to pull outlook calendar information from outlook to excel. I am trying to determine how to pull from Shared Calendars. This code looks as if they calendar has a number (9), but I can't figure out what the other calendar's numbers would be. How to pull from Shared Calendars and how to pull the month for which the calendar is on. My shared calendars are under Calendars>Shared Calendars in outlook. So for example, I would need to pull John Doe's calendar information for January if the calendar was on January. My code is listed below.
Sub ListAppointments()
Dim olApp As Object
Dim olNS As Object
Dim olFolder As Object
Dim olApt As Object
Dim NextRow As Long
Set olApp = CreateObject("Outlook.Application")
[Code] ......
I have a sheet with column A. This column A contains numbers from 1 number to 6 numbers.
So, one cell can have a '1' or a '999999' or any combination between them. Now this is the problem.
I want a formula that will fill those cells that don't contain a number up to 6 digits. So if a cell contains '254' I will like this formula to fill the cell like this: 000254.
This should happen with any number that don't have a number with six digits.
78 should be 000078, 78652 should be 078652 and so on.
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
I've done the following:
Sub BrownBH()
If Range("Brown!B4:B31") = X Then
Range("C4").Value = [#A]
Else
Range("C4").Value = NT
End If
End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
I have to loop through a range in A, and if the letter "C" or the number "9" appears in the cell anywhere (it won't be a whole cell value) then I need column B to show "C".
I know how to do a whole value loop, but I'm stumped on a 'find X anywhere' search.
my spreadsheet to return the word unit if cell a18=1 or the word units if its over 1 but i also want the cell to remain empty if there is nothing input into cell a18 is this possible
I have a sheet that counts stock, in cell I5 i have week 4s results in k5 week 5s. what I need is in cell N5 the number in I5 if their is no number in k5 but if k5 has a number in it I want that number in N5
View 14 Replies View RelatedI am trying to have one cell automaticall input infromation based on another cell. For example, if A1 = 10, then I want B1 to automatically equal 20.
The formula I am using in B1 is as follows - =if(A1="10","20","")
I have 2 problems though:
1st - I don't want to put the furmula in any cell because other information is put in there also. I tried putting it in conditional format but I don't think it is meant for such usage. Also, I already have something in data validation. so I can't put anything there because to my knowledge you can only put one validation per cell.
2nd - I have multiple numbers (around 7) that I need to be automatically inputed along the columns.
I have two cells where data is input in the form
1234A the suffix letters can be a,b,c,d,e,t,s,v
I need to check if the suffix letter from both cells match up...
a can only match a
b can only match b
c can only match c
d can only match d
e can only match e
a-e can match t
s can only match s
v can only match v
is this possible without any macros?
Not sure if this can or would be done in vlookp??. In my example the print page needs to get data from a list where people set.
View 3 Replies View RelatedIf I have a dropdown menu in A1 which has the following data:
Chair1
Chair2
Chair3
and so on..
How can I create a funtion to B1 which would work so that if there is the text "Chair2" in cell A1 it would automatically give a value 200€ to B1?
What I would like to do is to take the name values in column B and fill that into the region of blank cells below. I know that a special cells function could probably do this paired with a looping structure. I'm new to VBA and am trying to learn it so that I can use it comfortably.
View 8 Replies View RelatedI have two obscure Files and I want certain information from each file.
I started by importing the data on seperate worksheets.
and I wanted to make a table basically summerizing the info on a third worksheet
On a third Worksheet i wanted to reference from those files in a table as i mentioned. So i started referencing the cells that contain the data for the first line and second line and i wanted to fill the series so I wouldn't have to type the info into Excel (like =C8)
uhm to summerize the following::
the two files are a players file (which has there specific team and player name) and a stats file (which has there corresponding stats). So i have the following
Year Team League GP G A Pts PIM +/-
2011-12 Swift Current Broncos WHL 82 5 22 27 128 10
the cell references are
for the stats worksheet
C8, D8, E8, J9, I9 (GP,G,A,PIM,+/-) Pts is just an add
and the next line would be 25 plus the cell references (so like C33)
i would like to fill it all the way down the page for about 1000 players
but it didn't work for me - the next line was C12, C27 etc...
I have a spreadsheet that will eventually consist of tens of thousands of rows. Several columns contain formula's. Rather than having to "highlight" a cell and then "drag" all the way down the column over thousands of rows before finally using the "fill down" function I am needing a method to short cut this process?
Is there a function that allows you to, say, nominate a range of cells that you can fill down over? For example, starting from the last row with data entered into it down to say row 12500 i.e. D22:D12500.
I am pulling a date from a cell to another and I need to create a formula based off of the result.
This is the formula I am using to pull the date over
=MID(AA3,FIND("/",AA3)-2,10)
This is what I need to do to the result
=WORKDAY(M3,6)
I believe =INDIRECT should be used, but I'm having difficulty making it work.
I have the below formula working correctly. However the issue is when it pastes and fills down values its using H1 reference in the formula even when it goes to the next column. So basically when it goes to cell I2 it should update the sumifs formula to lookup I1 instead of H1 and so on and so forth for all columns till the loop stops.
VB:
Sheet1.Activate
Dim frmla As String
frmla = "=SUMIFS($C:$C,$A:$A,H$1,$B:$B,$G2)"
Range("H2").Activate
Do Until ActiveCell.Offset(-1, 0) = ""
ActiveCell = frmla
ActiveCell.Offset(0, -1).End(xlDown).Offset(0, 1).Activate
Range(ActiveCell, ActiveCell.End(xlUp)).Select
Selection.FillDown
ActiveCell.Offset(0, 1).Activate
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN
EA
Polymer
DE
MA
Polymer
Medium
CN
EA
Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA"
Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro:
i.e
ABCDCN
EA
Polymer
Easy
DE
MA
Polymer
Medium
CN
EA
Polymer
Easy
I was used "if" condition but I can't able to run.
I have a button event coded to select and ultimately fill a range of cells with the intent of representing a timeline of payment periods.
Private Sub Timeline_Click()
Dim x As Integer, y As Integer, cell As Range
x = 1
[Code]....
The first row needs to be filled with numbers from 1 to the value of [D20]; E.g. if D20=10 then there would be 10 columns selected then filled 1 through 10.The second row needs to be similarly filled with ascending Y values; E.g. D13 = 4, D20=8: row 2{.5,1.0,1.5...}
I am trying to tie two worksheets together. If text found in one cell in sheet1, make the same cell on sheet2 different color.*
There is a catch... no formula can occupy the cell in sheet2.*
My question is, is there a way of have a formula in completely different cell that will eventually fill the cell on sheet2 with proper information?
To explain a little better, I am trying to tie the sheets together, same cells and everything so when information gets put inside the cell on sheet1 the same cell on sheet2 will change color or display different information, and vice versa. That is the reason no formulas can occupy those cells.
In one spot I have a formula that is pulling the last two characters of a cell (right,xx,2).
It results in a number. I am trying to that number in a vlookup
(=VLOOKUP(C2,data!$C$1:$D$6,2,FALSE))
But it appears not to recongize the number (c2), because I am getting #N/A for a result, even though the number is on my vlookup range.